• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.67-68
• /
• 2009

In this study, we studied the nature of thin films formed by photodoping chalcogenide materials with for use in programmable metallization cell devices, a type of ReRAM. We investigated the resistance of Ag-doped chalcogenide thin films varied in the applied voltage bias direction from about $1\;M{\Omega}$ to several hundreds of $\Omega$. As a result of these resistance change effects, it was found that these effects agreed with PMC-RAM. The results imply that a Ag-rich phase separates owing to the reaction of Ag with free atoms from the chalcogenide materials.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.9-16
• /
• 2002

The particles velocity in the instantaneous flow field and velocity change of particles along the jet centerline for various particle diameter in a circular turbulent impingement jet are investigated by using particle image velocimetry(PIV) and an equation of particle motion simplified by terms of inertia forces, drag and gravitational force. The jet Reynolds number was 3300 and 8700, and glass beads of 30,58 and 100$\mu$m in diameter were used. The PIV results show that the direction and size of velocity depends not only on the number density of particle but also on the particle momentum. The results obtained form calculation suggest that the particle velocity near the first impingement region deviated from local air velocity, which accords well with the PIV results. The rebound height of particle increase with the particle diameter. In the second-impingement, particle velocities increased sluggishly with Re=3300 but particle velocities uniformed with Re=8700 in stagnation region.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.5
• /
• pp.243-249
• /
• 2007

The age hardening behavior and mechanical properties of an extruded Al-Zn-Mg-(Cu)-0.1 wt.%Sc alloy were investigated with the Sc addition and ageing temperature. The results showed that the $Al_3Sc$ compounds were formed by Sc addition and distributed preferentially along the extrusion direction. The age hardening of Al-Zn-Mg-Cu-0.1 wt.%Sc alloy which was treated by T6 process was more significant than that of Al-Zn-Mg-0.1 wt.%Sc alloy. The tensile property of Al-Zn-Mg-Cu+0.1 wt.%Sc alloy was also higher than that of Al-Zn-Mg-0.1 wt.%Sc alloy, which is 691 MPa and 584 MPa in strength and 9% and 11% in elongation, respectively.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.905-907
• /
• 2004

This paper deals with the PM performance evaluations in a variable flux memory motor (VFMM) using a coupled finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of permanent magnets. The focus of this paper is the operation characteristics evaluation relative to magnetizing direction and quantity of permanent magnets on re-, demagnetization condition in a variable flux memory motor(VFMM)

• Journal of Drive and Control
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2022

Recently, a re-painting robot was developed to semi-automatically conduct blasting work in bridge spaces to improve work productivity and worker safety. In this study, a vision sensor-based monitoring module was developed to automatically move the re-painting robot along the path. The monitoring module provides direction information to the robot by analyzing the boundary between the painting surface and the metal surface. To stably measure images in unstable environments, various techniques for improving image visibility were applied in this study. Then, the driving performance was verified in a similar environment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.131-134
• /
• 2016

The conditions for chemical polishing and etching technique were investigated to reveal surface defects in RE : YAG ($RE=Nd^{3+},\;Er^{3+},\;Yb^{3+}$) single crystals grown by Czochralski method. The optimal condition for chemical polishing was in 85 % $H_3PO_4$ solution at $330^{\circ}C$ for 30 minutes with a specimen fixed in the vertical direction. In addition, the optimal condition for chemical etching was in 85 % $H_3PO_4$ solution at $260^{\circ}C$ for 1 hour, and $70{\sim}80{\mu}m$ sized triangular etch pits were observed on (111) face. As a result of defect density analysis, $1.9{\times}10^3/cm^2$ for Nd(1 %) : YAG, $4.3{\times}10^2/cm^2$ for Er(7.3 %) : YAG, and $5.1{\times}10^2/cm^2$ for Yb(15 %) : YAG were measured.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.6
• /
• pp.235-252
• /
• 2015

The Korean government is building a virtuous cycle of startups and venture businesses for a dynamic, innovative economy. This ecosystem is made possible when a social environment that embraces tolerance and turn business failure into re-startups and challenging venture startups by outstanding entrepreneurs are present. Due to the government's efforts to promote start-ups and venture businesses, their number has been increasing annually, but the efforts to create a social environment for re-startups and establish a relevant institution have recently started. This study is aimed at providing policy direction for re-startups by getting policy implications after identifying the current status of domestic failed businessmen' re-startups based on previous researches on failed businessmen. This study also reviewed advanced nations' cases and made international comparison of re-startup policies. Before the startup culture that recognizes failure as the stage for success is formed as in the U.S., it is necessary to create a legal basis for continuously pushing for the rechallenge policy of EU's Small Business Act and establish and operate the private sector-driven revitalization council of SMEs in Japan. It is also necessary to consider the guarantee of failed businessmen' livelihood. If additional research and government policies are added to the conclusions made on the policy implications, this research will provide an in-depth insight for revitalizing domestic re-startup.

• Korean Medical Education Review
• /
• v.19 no.3
• /
• pp.115-120
• /
• 2017

Despite the importance of how the premedical education curriculum is organized, the basic direction of the curriculum has not been evaluated at a fundamental level. In order to explore the basic directions of the premedical education curriculum, this study examined medical education as a university education, the historical basis of premedical education, and the direction of the premedical education curriculum. Historically, as medical education was incorporated into the university education system, premedical education developed based on basic science and liberal arts education. Accordingly, the direction of the premedical education curriculum began to split into two approaches: one believing in a basic science-based education intended to serve as the foundation of medical training, and the other believing in a liberal arts-based education intended to cultivate the qualities of a doctor. In recent years, however, the binary division in the direction of premedical education has ceased to exist, and the paradigm has now shifted to an agreement that premedical education must cultivate the basic scientific competence required for learning medical knowledge as well as the social qualities that a doctor should have, which are cultivated through the liberal arts. Furthermore, it has been asserted that the direction of premedical education should move toward the qualities that will be required in the future. With the fourth industrial revolution underway, the role of doctors is now being re-examined. This means that today's medical education must change in a future-oriented way, and the direction of the premedical education curriculum must be on the same page.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2845-2850
• /
• 2007

Flow-induced forces on two identical nearby circular cylinders immersed in the cross flow at Re =100 were numerically studied. We consider all possible arrangements of the two circular cylinders in terms of the distance between the two cylinders and the inclination angle with respect to the direction of the main flow. It turns out that significant changes in the characteristics of flow-induced forces are noticed depending on how the two circular cylinders are positioned, resulting in quantitative changes of force coefficients on both cylinders. Collecting all the numerical results obtained, we propose a contour diagram for drag coefficient and lift coefficient for each of the two cylinders. The perfect geometrical symmetry implied in the flow configuration allows one to use those diagrams to estimate flow-induced forces on two identical circular cylinders arbitrarily positioned in physical space with respect to the main flow direction.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2890-2895
• /
• 2007

Heat transfer on two identical nearby circular cylinders immersed in the uniform cross flow at Re = 100 and Pr = 7.0 was numerically studied. We consider all possible arrangements of the two circular cylinders in terms of the distance between the two cylinders and the inclination angle with respect to the direction of the main flow. It turns out that significant changes in the characteristics of heat transfer are noticed depending on how the two circular cylinders are positioned, resulting in quantitative changes of heat transfer coefficients on both cylinders. Collecting all the numerical results obtained, we propose a contour diagram for averaged Nusselt number for each of the two cylinders. The perfect geometrical symmetry implied in the flow configuration allows one to use those diagrams to estimate heat transfer rates on two identical circular cylinders arbitrarily positioned in physical space with respect to the main flow direction.