• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.151-156
• /
• 2009

This experimental study investigated in to the flow characteristics around staggered cooling tube arrays of fan coil unit for ship. A particle image velocimetry technique was employed to obtain detailed measurements at inlet-velocity-based Reynolds numbers of $Re=1.5{\times}10^3{\sim}Re=2.5{\times}10^3$. As for the results, the flow evolves rapidly and becomes spatially periodic in the streamwise direction after a relatively short distance. The flow exhibits strong Reynolds number dependence in developing region but no significant Reynolds number effects are observed in spatially periodic region.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.10
• /
• pp.809-820
• /
• 2003

The present study investigates effects of flow velocity on the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger application. Local heat/mass transfer coefficients on the wavy duct sidewall are determined by using a naphthalene sublimation technique. The flow visualization technique is used to understand the overall flow structures inside the duct. The aspect ratio and corrugation angle of the wavy duct is fixed at 7.3 and 145$^{\circ}$ respectively, and the Reynolds numbers, based on the duct hydraulic diameter, vary from 100 to 5,000. The results show that there exist complex secondary flows and transfer processes resulting in non-uniform distributions of the heat/mass transfer coefficients on the duct side walls. At low Re (Re<1000), relatively high heat/mass transfer regions like cell shape appear on both pressure and suction side wall due to the secondary vortex flows called Taylor-Gortler vortices perpendicular to the main flow direction. However, at high Re (Re>1000), these secondary flow cells disappear and boundary layer type flow characteristics are observed on pressure side wall and high heat/mass transfer region by the flow reattachment appears on the suction side wall. The average heat/mass transfer coefficients are higher than those of the smooth circular duct due to the secondary flows inside wavy duct. And also friction factors are about two times greater than those of the smooth circular duct.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.1
• /
• pp.21-30
• /
• 1999

The present study were investigated changes of precipitation behaviour of laves phase in ferrite single phase and ferrite-martensite dual phase and precipitation of laves phase under stress. Hardness changes in ferrite phase appeared two hardness peaks by precipitation of initial fine precipitator and laves phase in 3Mo-0.3Si and 3Mo-0.3Si-C specimens, respectively. Hardness changes in martensite phase of 3Mo-0.3Si-C specimen was lower in the initial stage of aging by carbide precipitation and after this, increased by re-hardening due to precipitation of laves phase. In the ferrite phase, laves phase was mainly precipitated, whereas in the martensite phase, carbide was preferentially formed during the initial stage of aging and with increasing aging time, laves phase and carbide were simultaneously precipitated by precipitation of laves phase at around carbide. In the ferrite-martensite interface, laves phase was mainly precipitated and carbide was mainly formed at boundary of lath martensite than grain boundary. Adding the stress in aging, fine precipitator of inital precipitation of laves phase precipitated in (100) of perpendicular to tensile direction and has grown to only followed<010>direction and also, volume fraction of laves phase increased. Consequently, the stress added was accelerated initial precipitation of laves phase.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.76-81
• /
• 2002

The dramatic increase in the depth of a weld bead penetration has been demonstrated by welding a stainless steel in GTA (Gas-Tungsten-Arc) process with activating flux which consists of oxides and halides. However, there is no commonly agreed mechanism fer the effect of flux on the process. In order to make clear the mechanism, each behavior of the arc md the weld pool in GTA process with activating flux is observed in comparison with a conventional GTA process. A constricted anode root is shown in GTA process with the activating flux, whereas a diffuse anode root is shown in the conventional process. These anode roots are related strongly to metal vapor from the weld pool and the metal vapor is also related to temperature distributions on the weld pool surface. Furthermore, it is suggested that a balance between the Marangoni force and the drag force of the cathode jet should dominate the direction of re-circulatory flow in the weld pool. The electromagnetic force encourages the inward re-circulatory flow due to the constricted anode root in the case with flux. The difference in flow direction in the weld pool changes the geometry or depth/width ratio of weld bead penetration.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.34.3-34.3
• /
• 2019

We report our discovery of observational evidence for the coherence between galaxy rotation and the average motion of neighbors. Using the Calar Alto Legacy Integral Field Area (CALIFA) survey data analyzed with the Python CALIFA STARLIGHT Synthesis Organizer (PyCASSO) platform, and the NASA-Sloan Atlas (NSA) catalog, we estimate the angular momentum vectors of 445 CALIFA galaxies and build composite maps of their neighbor galaxies on the parameter space of velocity versus distance. The composite radial profiles of the luminosity-weighted mean velocity of neighbors show striking evidence for dynamical coherence between the rotational direction of the CALIFA galaxies and the average moving direction of their neighbor galaxies. The signal of such dynamical coherence is significant for the neighbors within 800 kpc distance from the CALIFA galaxies with a confidence level of $3.5{\sigma}$, when the angular momentum is measured at the outskirt ($Re<R{\leq}2Re$) of each CALIFA galaxy. We also find that faint or kinematically misaligned galaxies show stronger coherence with neighbor motions than bright or kinematically well-aligned galaxies do. Our results show that the rotation of a galaxy, particularly at its outskirt, may be significantly influenced by recent interactions with its neighbors.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.7
• /
• pp.1311-1328
• /
• 2011

We re-render a photographic image as a simulated pencil drawing using two independent line integral convolution (LIC) algorithms that express tone and feature lines. The LIC for tone is then applied in the same direction across the image, while the LIC for features is applied in pixels close to each feature line in the direction of that line. Features are extracted using the coherent line scheme. Changing the direction and range of the LICs allows a wide range of pencil drawing style to be mimicked. We tested our algorithm on diverse images and obtained encouraging results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.2 s.233
• /
• pp.247-254
• /
• 2005

A parametric study on the interactions of two spheres aligned in the streamwise direction is carried out using an immersed boundary method. The numerical results for the case of single sphere for the range of $Rs{\le}300$ are in good agreement with other authors' experimental and numerical results currently available. Then, our main investigation is focused on identifying the change of the vortical structures in the presence of a nearby sphere aligned in the streamwise direction for the range $Re{\le}300$. It turns out that significant changes in physical characteristics are noticed depending on how close the two spheres are. In this paper, not only quantitative changes in the key physical parameters such as the force coefficients, but also qualitative changes in vortex structures are reported and analyzed.

• Journal of the Korean Society of Visualization
• /
• v.19 no.2
• /
• pp.26-31
• /
• 2021

The spanwise growth of turbulence structures in turbulent pipe flow was investigated using the direct numerical simulation data of Re_𝜏 = 544, 934 and 3008. Two-point correlations and pre-multiplied energy spectra of streamwise velocity fluctuations were examined along the spanwise direction. The arclength direction is defined as r𝛳, which is useful for an analogy with the spanwise direction for channels or boundary layers; here, r and 𝛳 are the radial distance from the core and the azimuthal angles, respectively. Both analyses showed that the arclength scales increased with increasing the wall-normal distance. It showed that the coherent structures were confined in the core region due to the crowding effect of a circular pipe geometry. The pipe flow simulation could describe a realistic geometrical flow along the azimuthal direction, unlike the simulations of turbulent channel or boundary layer flow using periodic boundary conditions along the spanwise direction. The present results provided the spanwise organization of energy-containing motions over a broad range of scales in turbulent pipe flow.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3439-3457
• /
• 2014

Clustering is an effective method for improving the performance of large scale mobile ad hoc networks. However, when the moving speed is very fast, the topology changes quickly, which leads to frequent cluster topology updates. The drastically increasing control overheads severely threaten the throughput of the network. SCBCS (Signal Characteristic Based Cluster Scheme) is proposed as a method to potentially reduce the control overheads caused by cluster formation and maintenance in aeronautical ad hoc networks. Each node periodically broadcasts Hello packets. The Hello packets can be replaced by data packets, which preserve bandwidth. The characteristics of the received packets, such as the Doppler shift and the power of two successive Hello packets, help to calculate the relative speed and direction of motion. Then, the link connection lifetime is estimated by the relative speed and direction of motion. In the clustering formation procedure, the node with the longest estimated link connection time to its one-hop neighbors is chosen as the cluster head. In the cluster maintenance procedure, re-affiliation and re-clustering schemes are designed to keep the clusters more stable. The re-clustering phenomenon is reduced by limiting the ripple effect. Simulations have shown that SCBCS prolongs the link connection lifetime and the cluster lifetime, which can reduce the topology update overheads in highly dynamic aeronautical ad hoc networks.

• Journal of Distribution Research
• /
• v.13 no.2
• /
• pp.79-95
• /
• 2008

This study has focused on the relationship between the shopping mall and tenant store. Although the growth and development of shopping mall in Korea, there are few academic and professional interests. Therefore, adopting expectancy-disconfirmation paradigm, this study examined the constructs of expectation, performance, disconfirmation, satisfaction and re-visit intention of shopping mall and tenant store in each context. The research model also considered the mutual effect of these constructs between shopping mall and tenant store as positing the path between them. Hence, main hypotheses were divided into two different ways from the constructs of shopping mall to tenant store's and vice versa. Then, three hypotheses exploring the direction of customer's evaluation shopping mall and tenant were also included in the research model. From the result of 461 mall-intercept survey, almost hypotheses were supported as expected. In the explorative approach to find direction, the path from disconfirmation of and satisfaction with tenant to disconfirmation of and satisfaction with shopping mall were supported. In addition, the path from satisfaction with shopping mall to re-visit intention of tenant store was also accepted.