• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.127-133
• /
• 2007

This paper represents the numerical study on Taylor flow according to the radius ratio and the angular velocity for flow between tow cylinder. The numerical model is consisted of two cylinder which inner cylinder is rotating and outer cylinder is fix, and the axial direction is used the cyclic condition because of the length for axial direction is assumed infinite. The diameter of inner cylinder is assumed 86.8 mm, the numerical parameters are angular velocity and radius ratio. The numerical method is compared with the experimental results by Wereley, and the results are very good agreement. The critical Taylor number is calculated by theoretical and numerical analysis, and the results is showed the difference about ${\pm}10\;%$. As $Re/Re_c$ is increased, Taylor vortex is changed to wavy vortex, and then the wave number for azimuthal direction is increased. Azimuthal wave according to the radius ratio is showed high amplitude and low frequence in case of small radius ratio, and is showed low amplitude and high frequence in case of large radius ratio.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.9-16
• /
• 2018

The purpose of this paper is to reveal the limitation of previous studies on curriculum re-construction and to suggest an alternative for curriculum re-construction. Through the literature review, this paper finds that previous studies quiet over the direction about selecting as well as organizing contents. In order to overcome the weaknesses of previous studies, this paper embraces the interest of learner for establishing the direction of curriculum reconstruction. To be more specific, this study shows that how can the ideas of growth, habit, and interest of John Dewey connect to contents-selecting and organizing in the process of instruction. As a result, this paper helps curriculum discourses to make progress for various direction and helps teachers to reconstruct the contents based on interests of their students.

• 한국가시화정보학회:학술대회논문집
• /
• 2003.11a
• /
• pp.59-62
• /
• 2003

The near wake behind a sinusoidal cylinder at Re=5200 has been investigated using DPIV system. The velocity fields, streamlines and vorticity contours of the mean flow were compared at the nodal, saddle and middle planes with those of a right circular cylinder. For the sinusoidal cylinder, the vortex core moves downstream and the vortex formation region is expanded in streamwise direction while suppressed in transverse direction at the nodal plane. At the saddle and the middle plane the vortex spread in both streamwise and transverse directions, forming the maximum vortex region at the saddle plane.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.74
• /
• pp.1-23
• /
• 2017

The buyer must examine the goods, or cause them to be examined, within as short a period as is practicable in the circumstances. Article 38 lays down a fundamental principle that requires the buyer to examine quickly the goods delivered by the seller. Article 38 (1) provides that the examination be made within as short a period as practicable in the circumstances. The goods have to be examined within as short a period as is practicable in the circumstances. The rule is based on the fundamental idea of reasonableness, meaning that the buyer must examine the goods as soon as reasonably possible. It may be said that the buyer should act reasonably fast. Article 38 (2), (3) concerns sales involving carriage of the goods, where the seller's obligation to deliver consists in handing the goods over to the first carrier for transmission to the buyer. In this case the buyer is generally able to examine the goods only after they have come to destination. Article 38 (3) takes into account the case where the buyer redirects the goods in transit or re-dispatches them to another destination. Redirection in transit occurs when the destination is changed before the goods are received by the buyer. The buyer could re-dispatch the goods without having them unloaded, or re-dispatch them through another carrier.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.83-89
• /
• 2011

Laminar flow over a cube near a plane wall is numerically investigated in order to understand the effects of the cube-wall gap on the flow characteristics as well as the drag and lift coefficients. The main focus is placed on the three-dimensional vortical structures and its relation to the lift force applied on the cube. Numerical simulations are performed for the Reynolds numbers between 100 and 300, covering several different flow regimes. Without a wall nearby, the flow at Re=100 is planar symmetric with no vortical structure in the wake. However, when the wall is located close to the cube, a pair of streamwise vortices is induced behind the cube. At Re=250, the wall strengthens the existing streamwise vortices and elongates them in the streamwise direction. As a result, the lift coefficients at Re=100 and 250 increase as the cube-wall gap decreases. On the other hand, without a wall, vortex shedding takes place at Re=300 in the form of a hairpin vortex whose strength changes in time. The head of hairpin vortex or loop vortex, which is closely related to the lift force, seems to disappear due to the nearby wall. Therefore, unlike at Re=100 and 250, the lift coefficient tends to decrease more or less as the cube approaches the wall.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.133-138
• /
• 1987

In this paper the tuning characteristics of resonant frequencies are experimentally studied through the variation of the length of the inner conducting rod in a re-enterant eavity resonator. The re-enterant eavity resonator consists of a coaxial cable and a cylindrical wave guide. The length of the inner conducting rod can be varied to the longitudinal direction. The resonant frequencies of TMonq modes are measured according to the arbitrary length. In order to verify the propriety of experimental results, experimental results are compared with other theoretical results. The results in this paper can be applied to wave meter and resonant circuit of amplifier. They will be use to vary resonant frequencies of a dielectric resonator in MIC and filter.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.513-518
• /
• 1998

In Half Precast Concrete Method, such as composite slab and composite wall, Interface between half PC plate and cast-in-place concrete is occurred. And this interface endure lastly in-plane shear which is occurred by external force. Therefore, test was executed to study in-plane shear strength of interface between half PC plate and cast-in-place concrete. In this test, Experimental parameters are finishing condition of the interface, cohesion of concrete, existence and nonexistence of re-bar truss, and angle and direction of lattice of re-bar truss. Comparing and analyzing experimental results, conclusions are obtained as follows. (1) In-plane shear strength of wide interface in composite plate is more affected by the roughness of interface than re-bar truss. And cohesion of concrete contribute to increasing in-plane shear strength. Therefore it seems that the interface should be roughen and kept clean to improve in-plane shear strength. (2) It seems that shear friction equation in ACI code can be sagely available for design of in-plane shear of composite plate.

• KIEAE Journal
• /
• v.4 no.2
• /
• pp.3-10
• /
• 2004

The purpose of this study is to suggest the guidelines for suitability analysis of the environmentally friendly rural village housing site. And then this study is based on the rural village model for the rural village (re)development. The suitability analysis of environmentally friendly rural village housing site is conducted on Suryon dong, Wonju, Gangwon-do. The method of analysis is to secure validaty and reliability of the exact analysis of a geographic data for a decision-making statistical analysis. The results of this study is useful to prove it conclusively site-suitability to establish a principles and to change direction for the environmentally friendly rural village and rural housing (re)development.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1163-1164
• /
• 2006

TZM alloy having elongated coarse-grain structure was developed by three-step internal nitriding treatment at 1423 to 1873 K in $N_2$ and subsequent recrystallization treatment at 2173 K in vacuum. Some specimens were subjected to re-nitriding treatment at 1873 K for 16 h. After the recrystallization treatment, aspect ratio (L/W) of grains for rolling direction was about 50 at the maximum. Yield stress obtained at 1773 K after re-nitriding treatment was about 6 times as large as that of recrystallized specimen. Re-nitriding was very effective in the improvement in strength of TZM alloy having elongated coarse-grain structure.

• The Korean Journal of Archival Studies
• /
• no.61
• /
• pp.5-29
• /
• 2019

The presidential archives of Participating Government were left as a result of record production innovation. The record proves the whole process of decision making and serves as a means of enhancing transparency and accountability. This article analyzed the existence form of records and asserted the necessity of reorganization. In the direction of the re-organization of records, we proposed a redesign of the record classification system, logical re-registration of records, and description of record detail information. In order to facilitate the use of the archives, the Presidential Archives should proceed with these tasks at the earliest opportunity.