• Korean Institute of Interior Design Journal
• /
• no.13
• /
• pp.130-138
• /
• 1997

This study is to present the visual phenomenon of natural light in the interior space. The continuously changing natural light define the visual phenomenon of the architectural space. First, the objective of this study was finding the importance of the visual phenomena which were generated from correlating natural right with the interior space. And the second was to categorize the factors of the visual phenomenon which can be useful factors for modern interior design practice. As a result of this study, two visual phenomena were classified. First; territorial phenomenon: dividing, partitioning, and sectioning by natural light, Second; phenomena by the inflow methods of natural light; a) by direct inflow; transparency, expansion, and floating, b) by filtering fixtures; the architectural structure, color, and the transluscent material, c) by dramatic spacial present of natural light, d) by the sense of direction of naturel light; continuity, and transformatiov. Found and classified each factor is not presented by itself, rather compounded forms. Because of the limited analysis of modern buildings, these found visual factors can not represent all phenomena. But if we practice these finding factors to design present interior space, it is sure of being very valuable factors to re-introduce the overlooked natural light into interior space.

• Journal of Information Technology Services
• /
• v.19 no.5
• /
• pp.83-91
• /
• 2020

Language Models such as BERT has been an important factor of deep learning-based natural language processing. Pre-training the transformer-based language models would be computationally expensive since they are consist of deep and broad architecture and layers using an attention mechanism and also require huge amount of data to train. Hence, it became mandatory to do fine-tuning large pre-trained language models which are trained by Google or some companies can afford the resources and cost. There are various techniques for fine tuning the language models and this paper examines three techniques, which are data augmentation, tuning the hyper paramters and partly re-constructing the neural networks. For data augmentation, we use no-answer augmentation and back-translation method. Also, some useful combinations of hyper parameters are observed by conducting a number of experiments. Finally, we have GRU, LSTM networks to boost our model performance with adding those networks to BERT pre-trained model. We do fine-tuning the pre-trained korean-based language model through the methods mentioned above and push the F1 score from baseline up to 89.66. Moreover, some failure attempts give us important lessons and tell us the further direction in a good way.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.5
• /
• pp.171-177
• /
• 2016

Plate heat exchangers have been widely used in various fields because of their high heat transfer coefficients, small area of installation, and ease of maintenance compared to other heat exchangers. However, when plate heat exchanger is used for a long time, leak can occur due to inner crack. Therefore, it is important to understand the inner flow characteristics in plate heat exchangers. In this study, the inner flow characteristics and flow rate of plate heat exchanger were evaluated using various flow directions, pin-hole sizes, and Reynolds numbers. In downflow, initially most water flowed to the opposite of the inlet due to distribution region. Then it gradually had a uniform distribution due to chevron configuration. In upflow, it had a uniform flow consistently due to the dominant gravity effect. As the Reynolds number increased, the leak rate was decreased due to the inertia effect regardless of the flow direction.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.3
• /
• pp.91-98
• /
• 2020

For form stability of membrane structures, membrane material is required to be in tension. Therefore, in planning and maintenance management, the engineer should consider enough about introduction of stress during construction and re-introduction of stress after completion. Clamping part is an important portion with the function for introducing tension into membrane materials, and the function to transmit stress to boundary structures, such as steel frames. Then, the purpose of this research is to clarify stress condition and stress transfer mechanism including clamping part of membrane structures, and to grasp the changing tendency of membrane structures with the passage of time. In this research, following previous one, we perform well-balanced evaluation by conducting tensile fractured tests of clamping part's specimens, and by measuring individually the amount of displacement of not only overall specimen's length but membrane material and clamping part. Thereby, we consider the influence the difference in the hardness of edge rope and the difference in the direction of thread affect modification and fracture load.

• KIEAE Journal
• /
• v.8 no.4
• /
• pp.29-36
• /
• 2008

The rapid industrialization since the 1960s has caused considerable changes in the appearance of Korean cities. The huge demand and cityward tendency derived from the increase of population with such the expansion from 9 millions in 1960 to 43 millions in 2003, have resulted in number of problems such as the falling-off in the quality of life, amenity, and safety. And above all, the urban identities is not to be found obviously in the cities. With regard to these problems, the re-creation of cities should be emphasized to make environmental, economical, and social improvements and to restore human-oriented activities. In the course of making new improvements cities need to preserve the characteristics and maintain the concordance with their environments. In other words, the restoration of cities ought to be made in the aspect of continuity, which means the accession of genetic factors inherent in cities. In this background, concerning about the system on apartment house especially relating to environmentally sound restoration and comparing with that of Japan, this study proposes the direction needed in the development of urban space.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.741-749
• /
• 2012

Since introduction of smart phone in Korean mobile telecommunication market, mobile internet service market has changed dramatically. Although there have been many heated discussion of pro and cons of recent tremendous growth of mobile traffic, mobile data service market has contributed to re-development of whole telecommunication market. This paper is aimed at empirically test and confirms the occurrence of induced demand resulted from LTE service launching. In conclusion, we suggest the direction of regulation and policy for sustainable development of mobile internet service.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.445-448
• /
• 2006

The effects of surface roughness on a spatially-developing turbulent boundary layer (TBL) were investigated by performing direct numerical simulations of TBLs over rough and smooth walls. The Reynolds number based on the momentum thickness was varied in the range $Re_{\theta}=300{\sim}1400$. The roughness elements used were periodically arranged two-dimensional spanwise rods, and the roughness height was $k=1.5{\theta}_{in}$, which corresponds to $k/{\delta}=0.045{\sim}0.125$. To avoid generating a rough wall inflow, which is prohibitively difficult, a step change from smooth to rough was placed $80{\theta}_{in}$ downstream from the inlet. The spatially-developing characteristics of the rough-wall TBL were examined. Along the streamwise direction, the friction velocity approached a constant value and a self-preserving form of the turbulent stress was obtained. Introduction of the roughness elements affected the turbulent stress not only in the roughness sublayer but also in the outer layer. Despite the roughness-induced increase of the turbulent stress in the outer layer, the roughness had only a relatively small effect on the anisotropic Reynolds stress tensor in the outer layer. Inspection of the triple products of the velocity fluctuations revealed that introducing the roughness elements onto the smooth wall had a marked effect on vertical turbulent transport across the whole TBL. By contrast, good surface similarity in the outer layer was obtained for the third-order moments of the velocity fluctuations.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.255-258
• /
• 2002

Liquid rocket engines using liquefied natural gas (LNG) or methane as a fuel is known to have several good characteristics, such as high specific impulse compared to other hydrocarbon fuels, environment-friendly exhaust gas, low production cost, and re-usability with low soot generation in the cooling channel. In this study, experimental combustion chambers capable of using LNC and $CH_{4}$ are being researched through experimental firing tests, and within easy range of eyes' inspection, there are the periodical existence of soot or discoloration in the chamber wall surface. This result means that mixture ratio of oxidizer and fuel fluctuates periodically between outer-row injectors in the mixing head in the circumferential direction. Therefore, based on this phenomenon, the variation of mixture ratio near the chamber wall caused by the spill pattern of a shear coaxial injector was analyzed quantitatively and the thermal heat flux Into the cooling channel is modified. Then, the calculated and modified results are compared with the measured ones.

• Hwankyungkyoyuk
• /
• v.16 no.2
• /
• pp.1-14
• /
• 2003

This study aims to review the present condition of human resources development in environment technology area and to explore the direction of human resources development plans, based on the results of a survey targeting experts in this area. Related papers & literatures are referred and a survey for experts' opinions are carried out. The survey was oriented to the importance and effectiveness of policies designed by Korea Ministry of environment. The main findings of this study are as follows; firstly, an emphasis should be put on generating professionals in charge of creating domestic demand for environmental purposes for promotion to make excellent environmental techniques being of practical use and help them go into businesses was turned out crucial; secondly, it is advised to upgrade the level of qualifications of environmental technicians by reforming into a graduate schoolcentered educational system on a human resource-rearing phase; thirdly, retraining should be provided by law to ensure the enhancement of re-educating the existing environmental technicians; fourth, efforts should be made to promptly develope new techniques and unify declining traditional items, deterring national technical qualification system oriented toward cultivating superintendents in the environment field.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.2
• /
• pp.29-47
• /
• 2004

As affective barriers to library and information use, library anxiety(Mellon, 1986) has been studied in reference/information services and bibliographic instructions. The paper revisits Mellon's theory of library anxiety and Bostick's(1992) Library Anxiety Scale(LAS) in the digital library environment. In particular, this study attempts to address the inadequacy of the continued applications of LAS in the digital library environment, although the scale has been used unquestionably as the instrument measuring library anxiety. This contention was substantiated by three service trends in digital libraries(i.e., digital reference services, remote access, and transition from bibliographic instructions to information literacy) and by re-analyses of published library anxiety research papers in recent years. This study addresses the need for scale development that could measure anxieties of digital library users. It also suggests Information Literacy Anxiety Scale(ILAS) as a direction for the new scale.