• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.486-488
• /
• 2004

Rayleigh signal fading phenomena due to multipath propagation in wireless communication can be simulated using the sum-of-sinusoids channel model. Jakes' fading model is very simple simulator based on the sum-of-sinusoids and has been widely used. However, It has some short-comings. Its time correlation properties based on the simulated waveform do not correspond to the statistical ones. In this paper, the difference between statistical and time properties of Jakes' fading channel model is examined and new simulator is proposed.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.297-303
• /
• 2021

When sound waves propagate over long distances in shallow water, measured transmission loss is greater than predicted one using underwater acoustic model with the Rayleigh reflection model due to inhomogeneity of the bottom. Accordingly, the US Navy predicts sound wave propagation by applying the empirical formula-based High Frequency Bottom Loss (HFBL) model. In this study, the measurement and analysis of transmission loss was conducted using mid-frequency (2.3 kHz, 3 kHz) in the shallow water of the East Sea in summer. BELLHOP eigenray tracing output shows that only sound waves with lower grazing angle than the critical angle propagate long distances for several kilometers or more, and the difference between the predicted transmission loss based on the Rayleigh reflection model and the measured transmission loss tend to increase along the propagation range. By comparing the Rayleigh reflection model and the HFBL model at the high grazing angle region, the bottom province, the input value of the HFBL model, is estimated and BELLHOP transmission loss with HFBL model is compared to measured transmission loss. As a result, it agrees well with the measurements of transmission loss.

• 전자공학회논문지 IE
• /
• v.44 no.4
• /
• pp.41-47
• /
• 2007

In this paper, the performance of simulation model in mobile to mobile Rayleigh and Rician fading channel is analyzed and simulation results are compared. The auto-correlation and cross-correlation functions of Rayleigh fading channels not only based on received signals of Clarke's fading model and but also based on received signals of phase shifted Clarke's fading model are derived and their simulation results are found. The two models are also applied to mobile to mobile Rician fading channel models and their numerical results of auto-correlation functions of complex envelop received signals shows the statistical properties match the theoretical values very well and rapidly converge with the small number such as N=8.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.111-117
• /
• 2008

This paper reports briefly on the computational results of a turbulent Rayleigh-Benard convection with the elliptic-blending second-moment closure (EBM). The primary emphasis of the study is placed on an investigation of accuracy and numerical stability of the elliptic-blending second-moment closure for the turbulent Rayleigh-Benard convection. The turbulent heat fluxes in this study are treated by the algebraic flux model with the temperature variance and molecular dissipation rate of turbulent heat flux. The model is applied to the prediction of the turbulent Rayleigh-Benard convection for Rayleigh numbers ranging from $Ra=2{\times}10^6$ to $Ra=10^9$, and the computed results are compared with the previous experimental correlations, T-RANS and LES results. The predicted cell-averaged Nusselt number follows the correlation by Peng et al.(2006) ($Nu=0.162Ra^{0.286}$) in the 'soft' convective turbulence region ($2{\times}10^6{\leq}Ra{\leq}4{\times}10^7$) and it follows the experimental correlation by Niemela et al. (2000) ($Nu=0.124Ra^{0.309}$) in the 'hard' convective tubulence region ($10^8{\leq}Ra{\leq}10^9$) within 5% accuracy. This results show that the elliptic-blending second-moment closure with an algebraic flux model predicts very accurately the Rayleigh Benard convection.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.23-31
• /
• 2007

If the effort(manpower) and schedule are estimated, there is very difficult to allocate the manpower according to the schedule time units efficiently. Generally, the Putnam's Rayleigh Model has been applied popularly. This distribution model is expressing topology that manpower is consumed concentrically in first-half point. But actual manpower of projects are consumed concentrically at middle or second half point. Therefore, this model cannot be applied in software project planning area. This paper suggests a model to distribute manpower efficiently. Fist of all, we investigate a typical type presenting in software development field and manpower profile type of actuality development projects. Next, we suggested a method to present the model by a drawing a contour about manpower profile for the efficient manpower distribution. The proposed model shows better performance than Rayleigh and Gomma model. By applying proposed model, we will properly distribute manpower to schedule in software development planning phase, and finally we may manage project successfully.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.723-730
• /
• 2000

In this paper, we perform a performance analysis of serial acquisition scheme using AWGN rejection filter in Rayleigh fading channel and propose robust acquisition scheme using Reference filter, which is utilized to vary threshold at fading rate, in Rayleigh fading channel. AWGN rejection filter is utilized to evaluate running average for compensating channel gain. The JAKE model, which a channel model, is used for the analysis. The simulation result shows that the mean acquisition time of the proposed acquisition system is minimized than acquisition system using AWGN rejection filter and serial-search acquisition system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.91-101
• /
• 2000

Modeling of radiation beam from ultrasonic transducers has been investigated extensively, since it is one of the most important, fundamental issues that have great influence on the accuracy of an ultrasonic measurement model. Here, three popular radiation models, namely the Rayleigh-Sommerfeld integral model, the boundary diffraction wave model and the edge element model, are discussed briefly, and the radiation beam fields from ultrasonic transducers with planar, circular and rectangular cross-sections are calculated using these three models. Then, the accuracy and the time-efficiency of these methods are compared based on the calculation results.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.207-212
• /
• 2008

This paper evaluates software cost estimation models, and presents the most suitable model. First, we transformed a relevant model into variables to make in linear. Second, we evaluated model's performance considering how much suitable the cost data of the actual development software was. In the stage of model performance evaluation criteria, we used MMRE which is the relative error concept rather than the absolute error. Existing software cost estimation model follows Weibull, Gamma, and Rayleigh function. In this paper, Gompertz function model is suggested which is a kind of growth curve. Additionally, we verify the compatability of other different growth curves. As a result of evaluation of model's performance, Gompertz function was considered to be the most suitable for the cost estimation model.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.1
• /
• pp.9-18
• /
• 2004

Successful project planning relies on a good estimation of the manpower required to complete a project in addition to the schedule options that may be available. Existing software manpower estimation models present the total manpower and instantaneous manpower distribution for the software life cycle. Putnam's Rayleigh and Phillai et al.'s Gamma models present a model with assumption that the manpower is needed at the system delivery. This means that 40 percent of total manpower is applied at the software development, and the other 60% is applied during maintenance phase. However Warburton observes the manpower is needed during development phase with the peak at the completion of the software design phase. So, the existing models were not appropriate to be applied to practical projects. This paper suggests the Sigmoid model which does not consider the point of manpower peak to fix the problem above. The suggested model showed some improvement when practical data was applied. Therefore, the Sigmoid model can be used as alternative of Rayleigh and Gamma model to estimate distribution of manpower during software development phas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.321-328
• /
• 2010

A Rayleigh fading channel simulator that realizes given correlation properties between two channels such as downlink/uplink is described. We propose an improved channel simulator that provides more accurate match between reference correlation and simulated one. The proposed channel simulator is based on a sum-of-sinusoids (SOS) method that handles finite sums of weighted sinusoid functions. SOS method is widely accepted in generating fading signals and obtain the exact match with the reference model if infinite number of weighted sinusoids are used. The proposed channel simulator minimizes mean-square-error (MSE) to obtain a close matched correlation properties.