• Korean Journal of Veterinary Research
• /
• v.61 no.1
• /
• pp.7.1-7.7
• /
• 2021

The levels of aflatoxin (AFT) and ochratoxin (OCT) were assessed at different seasons in raw materials, different feed manufacture processing stages, and animal feeds in feed mills in Korea implementing the hazard analysis and critical control point (HACCP) system. Two hundred samples were collected in all four seasons from five feed mills implementing the HACCP system and examined for AFT and OCT contents. The AFT and OCT levels were analysed by using HPLC method to provide information on raw material and product stage. The AFT content of raw ingredients in the spring season was highest in corn gluten (3.84 ppb) and lowest in corn (1.82 ppb) The AFT content of corn was highest in the winter season (2.17 ppb). The content of OCT in wheat was highest in the winter season. The amounts of AFT and OCT at processing stages were higher than in the raw materials or feed. In particular, AFT content was higher in the transfer stage (3.88 ppb) than in the mixing (2.86 ppb) or filling stages (3.45 ppb) in the summer season. The means of AFT and OCT level in laying hen feed was 3.41 ppb and 1.14 ppb for broiler feed, respectively. The means of AFT and OCT level in and broiler feeds was 3.44 ppb and 1.17 ppb for broiler feed, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.3
• /
• pp.288-292
• /
• 2008

To save cost and time in Kimchi manufacture, the use of raw red-pepper paste and device-mashed vice materials, in place of dried red-pepper powder, was examined. Two kinds of Kimchi were prepared: One with dried red pepper powder and device-not mashed vice materials and the other with raw red pepper paste and device-mashed vice materials. Then pH, total acidity, total viable cell counts, total lactic acid bacteria and sensory characteristics were evaluated. Comparisons of the two Kimchis, indicated that changes in pH, total acidity, the total number of viable cells and total lactic acid bacteria were similar between the two groups. The acceptability score of the Kimchi made using the raw red pepper paste and device-mashed vice materials was slightly lower than that of Kimchi made using the dried red-pepper powder. This color was indistinctly changed since the vice materials were mashed and mixed. In conclusion, the results indicate that when manufacturing Kimchi using device-mashed vice materials, Kimchi of better quality can be made by adding dried red-pepper powder.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.45-52
• /
• 1997

It is the problem point of stability for this study to produce cosmetics and to occur in the circulation process, and specially in a case of alcoholic toilet water the precipitation materials to float on content materials has study on the solubility of perfume, and it has practiced in order to examine the problem point whether the raw materials of plastic vessel is or not harmful in content materials. In testing result, A study on stability of alcoholic toilet water is above all the precipitation materials which floats in content materials, and It is appeared by combination ratio to the raw materials of perfume, ethanol, solubilizer and refining water etcs, and in second the alkali degree which has gushed out of glass vessel can understand the thing that the change of PH is largely increased following to the passage of time, and in third the harmful component of content materials out of raw material in plastics vessel must certainly consider a stability and a safety in quality control of products.

• Advanced Composite Materials
• /
• v.17 no.2
• /
• pp.167-175
• /
• 2008

Vapor grown carbon fibers (VGCF) were treated with atmospheric plasma enhancing the surface area in order to improve the bonding to the matrix in epoxy composites. The changes in the mechanical properties of VGCF/epoxy nanocompostes, such as tensile modulus and tensile strength were investigated in this study. VGCF with and without atmospheric plasma treatment for surface modification were used in this investigation. The interdependence of these properties on the VGCF contents and interfacial bonding between VGCF/epoxy matrix were discussed. The mechanical properties of atmospheric plasma treated (APT) VGCF/epoxy were compared with raw VGCF/epoxy. The tensile strength of APT VGCF/epoxy nanocomposites showed higher value than that of raw VGCF. The tensile strength was increased with atmospheric plasma treatment, due to better adhesion at VGCF/epoxy interface. The tensile modulus of raw VGCF and APT VGCF/epoxy matrix were of the similar value. The dispersion of the VGCF was investigated by scanning electron microscopy (SEM), SEM micrographs showed an excellent dispersion of VGCF in epoxy matrix by ultrasonic method.

• Journal of architectural history
• /
• v.31 no.4
• /
• pp.7-16
• /
• 2022

Since the beginning of the second Sino-Japanese war in 1937, the entire Korean Peninsula has entered a full-fledged wartime system. Japan enacted laws that strongly regulate the distribution of various resources for war, and the same was implemented in Joseon. In particular, as iron, copper, lead, tin, and aluminum were mobilized as raw materials for military supplies such as weapons, private distribution decreased significantly, which had a great impact on the construction industry. As the use of metal such as steel as building materials requires permission from the provincial governor, it has become difficult to supply and demand except for some military facilities. In addition, the Japanese Ministry of Commerce and Industry encouraged research and development and manufacturing to promote the so-called "substitute goods industry" to make up for the shortage of supplies. Products with improved performance through chemical treatment by injecting only a small amount of the same raw material than before or using alternative raw materials have been developed. It was intended to overcome the limitations of lack of raw materials through the chemical industry. In terms of building materials, various substitutes were produced due to the incorporation of petrochemicals and the use of synthetic resins. This trend continued even after the end of the war and served as one of the backgrounds for R&D and production of new materials without returning to the "substitute goods."

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.2
• /
• pp.77-86
• /
• 2001

As construction and expansion of wastewater treatment works is continuing, generation of sludge is increasing. Bur most sludge is not used appropriately but disposed by landfill dumping to sea. Furthermore direct landfilling of sludge cake containing moisture content over 75% has been legally prohibited since 2001 that's enforcement will be more strict in 2003. Such a situation means nowadays recycling of organic waste such as sludge and food waste is necessary. Composting is one of recycling methods commonly and used as an effective means of stabilizing organic waste and then compost can be used as fertilizer. However fertilizer law management which include standard of compost products and other fertilizers applied all sludge products indiscriminiately and was not flexible. So MOE has graded organic composts according to land applications to improve recycle of organic wastes. The classified organic compost which contains low contaminants has been possible to use as various purpose. This study enalyzed 30 samples which were raw materials for compost and compost products management well and to estimate the quality of compost products. Heavy metals were measured in Raw materials and OM/N, NaCl and VS were tested in compost products as well as heavy metals. As a result, approximate 10% of raw materials was not suitable to the grade A and 6.7% over the grade B of the regulation on raw materials for compost. In the case of 30 produced compost propducts approximate, 57% of composts was not compatible with the grade A and B of the regulation on composting product. The qualities of compost products were worse than raw materials, because the compost products have more regulation item raw materials have.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.66-73
• /
• 2023

The construction industry suffers losses due to failures in demand forecasting due to price fluctuations in construction raw materials, increased user costs due to project cost changes, and lack of forecasting system. Accordingly, it is necessary to improve the accuracy of construction raw material price forecasting. This study aims to predict the price of construction raw materials and verify applicability through the improvement of the Data Refactor technique. In order to improve the accuracy of price prediction of construction raw materials, the existing data refactor classification of low and high frequency and ARIMAX utilization method was improved to frequency-oriented and ARIMA method utilization, so that short-term (3 months in the future) six items such as construction raw materials lumber and cement were improved. ), mid-term (6 months in the future), and long-term (12 months in the future) price forecasts. As a result of the analysis, the predicted value based on the improved Data Refactor technique reduced the error and expanded the variability. Therefore, it is expected that the budget can be managed effectively by predicting the price of construction raw materials more accurately through the Data Refactor technique proposed in this study.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.335-339
• /
• 2008

Biodiesel is an alternative and renewable energy source, which is hoped to reduce global dependence on petroleum and environmental problem. Biodiesel produced from a variety of oil sources such as vegetable oil, animal fat and waste oils, and has properties similar to those associated with petro-diesel, including cetane number, volumetric heating value, flash point, viscosity and so on. In this study, we investigate the effect of quality of raw materials on alkali-catalyzed transesterification for producing of biodiesel. The increase of content of free fatty acid and water in oil were caused the sharp decrease of conversion yield. Also, the low purity of methanol in reactant was inhibited the reaction rate. In the case of addition of sodium sulfate as absorbent to prepare catalyst solution, the content of fatty acid methyl ester in product was increased more about 1.6% than that of control. However, the addition of zeolite, sodium chloride and sodium sulfate as absorbent in reactant to remove water generated from reaction did not show any enhancement in the reaction yield. This result may provide useful information with regard to the choice and preparation of raw materials for more economic and efficient biodiesel production.

• Convergence Security Journal
• /
• v.15 no.3_2
• /
• pp.71-76
• /
• 2015

Global companies are building global production network for the demand of the global market. However, the establishment and operation of overseas plants make the unexpected case like theft, low will to produce and salary issue of local workers. Thus in this paper, we propose the raw materials loss prevention model based on IP Camera and RFID Box for raw materials management of overseas plants. This model can prevent the theft or loss of raw materials write inventory up in real-time. This model can be allows us to realize the cost-effective production management because it enables remote inventory management. And this model can prevent brand image danage and profit loss due to reject product.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.483-489
• /
• 2005

For the raw materials of 3CaO$\cdot$3Al$_{2}$O$_{3}$ $\cdot$CaSO$_{4}$(CSA) clinker manufacturing, the applications of industrial wastes such as waste shell, spent oil-refining catalyst and desulfurized gypsum were examined. The c1inkerbility of the raw mix and the behaviour of formation of clinker minerals were studied and then some hydraulic properties of cements containing the clinker were also investigated. By virtue of the high reactivity of thermally decomposed raw materials, CSA clinkers were obtained at relatively low temperature of 1250$^{\circ}C$ and thus oil-refining catalysts were more desirable than aluminium hydroxide as an aluminous raw material. The expansive cement samples showed somewhat lower flow value than that of OPC, but their compressive strengths were developed earlier and higher than that of OPC due to formation of ettringite in the early hydration time, which indicated the possibility of practical use of low-cost CSA clinker using industrial wastes only.