• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.1
• /
• pp.34-45
• /
• 2003

Silk was treated with calcium hydroxide for degumming at different treatment times, temperatures and Ca(OH)$_2$ concentration to optimize degumming conditions in this thesis. After degumming, soluble and insoluble sericin were seperated and then the soluble sericin was characterized by measuring the average degree of polymerization (D.P.), lysinoalanine (LAL) content, DSC, and by amino acid analysis. And degummed silk fibroin was characterized by measuring tenacity and SEM. Degumming loss was increased by increasing the treatment time and temperature until about 30 minutes. After then, a slight difference was found along with treatment times at the Ca(OH)$_2$ concentrations of 0.07% and 0.1% solutions. After degumming, insoluble sericin ratio on degumming solution was increased by increasing treatment temperature at Ca(OH)$_2$ 0.04% solution. At the concentration Ca(OH)$_2$ of 0.07%, a soluble ratio was almost 100% regardless of treatment time and temperature. At the beginning of treatment, insoluble ratio was high at Ca(OH)$_2$ 0.1% solution but it was decreased by increasing treatment time. At the Ca(OH)$_2$ concentration of 0.04%, D.P. of soluble sericin was maintained as a constant value of 10 at 100$^{\circ}C$ although treatment time was increased. However, at 80$^{\circ}C$ and 90$^{\circ}C$, it was hard to prepare a soluble sericin having a constant D.P. by increasing treatment time. At the Ca(OH)$_2$ concentration of 0.07%, D.P. was almost 10 irrespective of treatment temperature and time. Soluble sericins with high D.P. of 20∼30 were obtained at 0.1% and 100$^{\circ}C$. LAL was not detected in soluble sericin. As the results of amino acid analysis, it showed that Ca(OH)$_2$ degumming reduced the contents of hydroxy amino acids like Ser., Thr. and Tyr. In DSC analysis of soluble sericin, endothermic peak by thermal deformation and pyrolysis showed at 189$^{\circ}C$ and at 299$^{\circ}C$, respectively. The tenacities of degummed silk were 15∼30% lower than that of raw silk. And it was decreased with increasing treatment time. From the morphological study, the thickness of degummed silk fibroin became thinner by increasing degumming loss. The roughness of a silk fibroin surface was appeared as treatment concentration was increased.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.92-99
• /
• 2000

To compare the effect of food waste compost(FWC) application on the sodicity of paddy and upland soil, laboratory experiment was conducted. Six kinds of FWC made of various mixing ratio of food waste and pig slurry as raw material were applied to paddy soil under submerged condition and to upland soil in field water capacity, and were kept at $25^{\circ}C$ under laboratory incubation. The higher the mixing ratio of food waste on making FWC, the higher the FWC showed Na content and EC. Mineralized ratio of cations in FWC during incubation showed no difference between paddy and upland soil. It was high in the order of Na>K>Mg>Ca as 99, 94, 71, and 71%, respectively. NaCl contents of FWC applied to soils against SAR and ESP were fitted well to first linear regression with extremely high significance($R^2=0.99$). Increasing rate of SAR and ESP was higher in upland soil than paddy soil by 2.3 times. The difference was considered to be caused by dilution effect which was exerted by the application of more soil to water ratio to paddy soil than to upland soil on SAR analysis in consideration of cultivating condition. The calculated values of $([Ca^{2+}+Mg^{2+}]/2)^{1/2}$ used as a denominator on SAR calculation showed a little difference among FWC treatments by 2.1~2.4, while [$Na^+$] used as a numerator showed much variance by 3.1~9.5. Therefore, as a parameter for the assessment of FWC quality affecting soil sodicity, the use of only Na content in FWC was proposed without regarding Ca and Mg contents. Soil Ex. Na contents showed extremely high correlation($R^2=0.99$) with ESP. Moreover, because the former can be more easily determined than the latter, soil Ex. Na content was proposed as a new sodicity index.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.357-366
• /
• 2007

Microorganisms participate in a variety of geochemical processes such as weathering and formation of minerals, leaching of precious metals from minerals, and cycling of organic matter The objective of this study was to investigate biogeochemical processes of iron leaching from magnetite ore by iron-reducing bacteria isolated from intertidal flat sediments, southwestern part of Korea. Microbial iron leaching experiments were performed using magnetite ore, Shinyemi magnetite ore, in well-defined media with and without bacteria at room temperature for a month. Water soluble Fe and Mn during the leaching experiments were determined by ICP analysis of bioleached samples, and the resulting precipitated solids were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The extent of iron leaching from magnetite in the aerobic conditions (Fe = 15 mg/L and Mn = 3.41 mg/L) was lower than that in the anaerobic environments (Fe = 32.8 mg/L and Mn = 5.23 mg/L). The medium pH typically decreased from 8.3 to 7.2 during a month incubation. The Eh of the initial medium decreased from +144.9 mV to -331.7 mV in aerobic environments and from -2.3 mV to -494.6 mV in anaerobic environments upon incubation with the metal reducing microorganisms. The decrease in pH is due to glucose fermentation producing organic acids and $CO_2$. The ability of bacteria to leach soluble iron from crystalline magnetite could have significant implications for biogeochemical processes in sediments where Fe(III) in magnetite represents the largest pool of electron acceptor as well as to use as a novel biotechnology for leaching precious and heavy metals from raw materials.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.1-6
• /
• 2008

Purpose: Plastic optical monomer materials having ultra high refractive index have an income of the whole quantity from advanced nations to domestic companies which are related to plastic optical lens. It is necessary to develop novel plastic optical lens materials in order to overcome a FTA provision and revitalize a stagnating optical lens industry in the interior optical lens industries. The new plastic optical lens materials against the substitution effect of income should be gradually demanded. This work will be synthesized novel super high refractive monomer resin materials of urethane lens series and studied the properties of optical lens using it. Methods: ETS-4 (2-(2-mercaptoethylthio)-3-{2-[3-mercapto-2-(2-mercaptoethylthio)propyl thio]ethylthio}propane -1-thiol), which is optical lens monomer resin having super high refractive index, was synthesized and identified its structure and property by elemental analysis, EI-MS, TGA, FT-IR spectroscopy, $^1H$ and $^{13}C$ NMR spectroscopies. After mixing evenly from mixed monomer resin and diisocyanate series, it was casting in glass mold. After thermal curing, the obtained optical lenses were measured and compared with the refractive index and Abbe number for studies of their optical properties. Results: We have synthesized the novel ultra high refractive index monomer resin, ETS-4, and have identified its structure and property by elemental analysis, EI-MS, TGA, FT-IR spectroscopy, $^1H$ and $^{13}C$ NMR spectroscopies. The existence of three isomers for EST-4 was identified by $^{13}C$ NMR spectroscopy. The refractive index ($N_d$ at $25^{\circ}C$) of monomer resin in liquid state obtained from the Abbe refractometer was 1.647. The refractive indexes of raw plastic optical lenses prepared from the mixed ETS-4 monomer and diisocyanate series were in the range of 1.656~1.680. Conclusions: Novel super high refractive index plastic optical lens monomer was synthesized and analysed, the optical lenses prepared using it were colorless transparency and excellent properties. It is of utility for the industrialization.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1675-1681
• /
• 2007

The seasoned porks loins manufactured using with seasoning sauce that were prepared with difference composites of medicinal plant extracts (T-0; medicinal plants extract not added, $T-1{\sim}3$ ; pork treated with mixture of 6 kinds medicinal plant, respectively). And the changes of lipids were investigated during storage at $4^{\circ}C$ for 15 days. Content of TBARS in raw pork was $0.15{\pm}0.03$ MA mg/kg at beginning storage stage, in seasoned pork group (T-1), TBARS content was $0.35{\pm}0.01$ MA mg/kg after storage for 15 days. But TBARS contents were ranged from 0.27 to 0.3MA mg/kg in seasoned pork groups (T-1, T-2 and T-3) and it significantly lower than T-0 group. Unsaturated fatty acid content tended to increase during storage, but decreased after storage 9 days. These tendency was equally appeared in the cholesterol content of $T-1{\sim}3$ groups. In conclusion, the addition of medicinal plant composites enhanced antioxidant activity of the seasoned pork.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.474-481
• /
• 2008

This research was performed to determine the proximate compositions, mineral contents, alginic acid, antioxidative activities and amino acids of sea tangles collected from Gijang and Wando area. Crude protein and ash contents were higher in Gijang sea tangle, whereas carbohydrate and moisture were higher in Wando in general. Mineral contents of Gijang sea tangle were higher than Wando. Especially, Na and K was the most abundant in both Gijang and Wando sea tangles. Alginic acid content was almost similar in both sea tangles. The major free amino acids were glutamic acid, aspartic acid, alanine, proline and hydroxyproline in both Gijang and Wando sea tangles. Antioxidative activity of methanol extract of sea tangle was measured by using DPPH radical scavenging and SOD-like activity. DPPH radical scavenging and SOD-like activity were about 17% ($40\;{\mu}g/ml$) and 7% ($5\;{\mu}g/ml$) higher, respectively, in Wando sea tangle. When stimulate the macrophages RAW264.7 cells with lipopolysaccharide (LPS), inhibition of NO synthesis of the methanol extract was 11% higher in Wando sea tangle comparing with Gijang samples.

• Journal of muscle and joint health
• /
• v.2 no.1
• /
• pp.17-40
• /
• 1995

Rheumatoid arthritis is the one of the chronic diseases, one of its major symptoms is a chronic pain. Despite developing medical treatment and surgical techniques, it is suggested that to control the pain is the goal of the treatment. But pain is an inner experience and even those closest to the patient cannot truly observe its progress or share in its suffering. The National Academy of Sciences Institute of Medicine's report on Pain and Disability concluded that there is no objective measure of pain-(exactly) no pain thermometer-nor can there ever be one, because the experience of pain is inseparable from personal perception and social influence such as culture. To explore chronic pain experience is to understand the process and property of the patient's perception of pain through the response to pain, the coping with pain, and the adaptation to pain. Therefore a qualitative study was conducted in order to gain an understanding of pain experience of patients with RA in korea. I used naturalistic inquiry as a research methodology, which had 5 axioms, the first is that realities are multiple, constructed, and holistic, the second is that knower and known are interactive, inseparable, the third is only time and context bound working hypotheses(idiographic statements) are possible, the forth is all entities are in a state of mutual simultaneous shaping, so that it is impossible to distinguish causes from effects and the last is that inquiry is value-bound. Purposive sampling was conducted as a sampling. 20 subjects who experienced pain over 10 years, lived in middle-sized city and big city in Korea, and 17 women and 3 men. The subject's age was from 32 to 62 (average 48.8), all were married, living with their spouse and children, except two-one divorced and the other widow before they became ill. I collected data using In depth structured interview. I had interviews two or three times with each subject, and the interviews were conducted at each subject's home. Each interview lasted about two hours an average. A recording was taken with the consent of the subject. I used inductive data analysis-such as unitizing and categorizing. unitizing is a process of coding, whereby raw data are systematically transformed and aggregated into units. Categorizing is a process wherby previously unitized data are organized into categories that provide descriptive or inferential information about the context or setting from which the units were derived. This process is used constant comparative method. The pain controlling process is composed of behavior of pain control. The behaviors of pain control are rearranging of ADL, hiddening role conflict, balancing treatment, and changing social relation. Rearranging of ADL includes diet management, sleep management, and the adjustment of daily life activities. The subjects try to rearrange their daily activities by modified style of motions, rearranging time span & range of activities, using auxillary facilities, and getting help in order to keep on the pace of daily life. Hiddening role conflict means to reduce conflicts between sick role and their role as a family member. In this process, the subjects use two modes, one is to control the pain complaints, and the other is to internalize the value which is to stay home is good for caring her children and being a good mother. To control pain complaints is done by 'enduring', 'understanding' the other family members, or making them undersood in order to reduce pain. Balancing treatment is composed of two aspects. One is to keep the pain within the endurable level, the other is to keep in touch with medical personnel in order to get the information of treatment and emotional support. Changing social relation is made by information seeking and sharing, formation of mutual support relation, and finally simplification of social relationships. The subjects simplify their social relationships by refraining from relations with someone who makes them physically and psychologically strained. In particular the subjects are apt to avoid contact with in-laws, and the change of relation to in-laws results in lessening the family boundary. In the course of this process, they confront the crisis of family confict result in family dissolution. This crisis is related to the threat of self-existence. Findings from this study contribute to understanding the chronic pain experience. To advance this study, we should compare this result with other cases in different cultural contexts. I think to interpret these results, korean cultural background should be considered. Especially the different family concept, more broader family members and kinship network, and the traditional medical knowledge influences patients' behavior.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.47-75
• /
• 2009

Recently, researches on Management Information Systems (MIS) have laid out theoretical foundation and academic paradigms by introducing diverse theories, themes, and methodologies. Especially, academic paradigms of MIS encourage a user-friendly approach by developing the technologies from the users' perspectives, which reflects the existence of strong causal relationships between information systems and user's behavior. As in other areas in social science the use of structural equation modeling (SEM) has rapidly increased in recent years especially in the MIS area. The SEM technique is important because it provides powerful ways to address key IS research problems. It also has a unique ability to simultaneously examine a series of casual relationships while analyzing multiple independent and dependent variables all at the same time. In spite of providing many benefits to the MIS researchers, there are some potential pitfalls with the analytical technique. The research objective of this study is to provide some guidelines for an appropriate use of SEM based on the assessment of current practice of using SEM in the MIS research. This study focuses on several statistical issues related to the use of SEM in the MIS research. Selected articles are assessed in three parts through the meta analysis. The first part is related to the initial specification of theoretical model of interest. The second is about data screening prior to model estimation and testing. And the last part concerns estimation and testing of theoretical models based on empirical data. This study reviewed the use of SEM in 164 empirical research articles published in four major MIS journals in Korea (APJIS, ISR, JIS and JITAM) from 1991 to 2007. APJIS, ISR, JIS and JITAM accounted for 73, 17, 58, and 16 of the total number of applications, respectively. The number of published applications has been increased over time. LISREL was the most frequently used SEM software among MIS researchers (97 studies (59.15%)), followed by AMOS (45 studies (27.44%)). In the first part, regarding issues related to the initial specification of theoretical model of interest, all of the studies have used cross-sectional data. The studies that use cross-sectional data may be able to better explain their structural model as a set of relationships. Most of SEM studies, meanwhile, have employed. confirmatory-type analysis (146 articles (89%)). For the model specification issue about model formulation, 159 (96.9%) of the studies were the full structural equation model. For only 5 researches, SEM was used for the measurement model with a set of observed variables. The average sample size for all models was 365.41, with some models retaining a sample as small as 50 and as large as 500. The second part of the issue is related to data screening prior to model estimation and testing. Data screening is important for researchers particularly in defining how they deal with missing values. Overall, discussion of data screening was reported in 118 (71.95%) of the studies while there was no study discussing evidence of multivariate normality for the models. On the third part, issues related to the estimation and testing of theoretical models on empirical data, assessing model fit is one of most important issues because it provides adequate statistical power for research models. There were multiple fit indices used in the SEM applications. The test was reported in the most of studies (146 (89%)), whereas normed-test was reported less frequently (65 studies (39.64%)). It is important that normed- of 3 or lower is required for adequate model fit. The most popular model fit indices were GFI (109 (66.46%)), AGFI (84 (51.22%)), NFI (44 (47.56%)), RMR (42 (25.61%)), CFI (59 (35.98%)), RMSEA (62 (37.80)), and NNFI (48 (29.27%)). Regarding the test of construct validity, convergent validity has been examined in 109 studies (66.46%) and discriminant validity in 98 (59.76%). 81 studies (49.39%) have reported the average variance extracted (AVE). However, there was little discussion of direct (47 (28.66%)), indirect, and total effect in the SEM models. Based on these findings, we suggest general guidelines for the use of SEM and propose some recommendations on concerning issues of latent variables models, raw data, sample size, data screening, reporting parameter estimated, model fit statistics, multivariate normality, confirmatory factor analysis, reliabilities and the decomposition of effects.

• Korean Journal of Organic Agriculture
• /
• v.15 no.3
• /
• pp.319-330
• /
• 2007

This study analyzed physical and chemical characteristics of peat soil to use peat soil as the materials fur pot media and investigated seedling quality of horticultural plants in order to use peat soil as the raw materials fur pot media. The summary of the results is as follows; The chemical characteristics of peat soil, which is main ingredient of pot media are as follows; pH was 4.9, EC was less than $2.0ds{\cdot}m^{-1}$, which interferes the growth of the plant and organic ingredient was 33%. When looking into the germination characteristics of plants according to the mixture of pot media, red pepper showed 54.2% speed of germination and 97% germination rate in peat soil single treatment. Therefore the peatsoil was appropriate for the pot media for red pepper. In case of cucumbers, in the 50 : 50 treatment of main ingredient (peat soil) and auxiliary ingredients (vermiculite, peat moss and perlite) they showed 100% speed of germination and 100% germination rate. Therefore 50 : 50 treatment was appropriate fur the pot media for cucumbers. In case of chinese cabbage, peat soil, perlite and peat moss mixture (50 : 25 : 25) treatment showed the highest speed of germination (77.5%), while the germination rate was a little lower (92.15%) than comparative soil. However, it was appropriate for the pot media for chinese cabbage. In case of watermelon, germination was bad because of the influence of EC when the teat soil ingredient is over 80%. However, in the mixture of peat soil and vermiculite (50:50) treatment, they showed 91.6% speed of germination and 100% germination rate. Therefore it was appropriate for the pot media for watermelon. When looking into the growth of the plants according to the mixture of ingredients, peat soil and perlite (50:50) mixture showed excellent seedling quality for cucumbers, peat soil and perlite (50:50) mixture showed excellent seedling quality and it was proven to be appropriate for the pot media for cucumbers. In case of watermelon, peat soil, peat moss and perlite (80 : 10 : 10) mixture showed excellent seedling quality and it was proven to be appropriate for the pot media for watermelon.