• Journal of the Earthquake Engineering Society of Korea
• /
• 제10권1호
• /
• pp.9-16
• /
• 2006

The design practice of the lateral resisting system has been traditionally dependent on the experience and know-how of a structural engineer. And the method to reflect the evaluation results of building's capacity on design process doesn't exist. The proposal of a rational design of the lateral load resisting system is based on the available full capacity $(R_{ac})$ of a building and the minimum required capacity $(R_{code})$ suggested in the code. This study suggests thai nonlinear static analysis, which is the estimation of the lateral capacity with the pushover analysis, be included in the existing design procedure of the structure. After finishing the basic structural design, the lateral resisting capacity ol a building is estimated. At the phase of nonlinear static analysis, pushover analysis is peformed to define the fully yielded baseshear $(V_Y)$. When the design wind baseshear $(V_{wind})$ is bigger than the design seismic baseshear $(V_D)$, the value is checked to determine whether or not it is smaller than the $V_Y$. After confirming that it is smaller, the $R_{ac}$ of the structure is computed. If the $V_D$ is bigger at first, only the $R_{ac}$ is computed. When the value of the estimation shows remarkable differences with the $R_{code}$, repetition of the design modification is needed for those approximate to the $R_{code}$. Application of the proposed design procedure to 2-D steel braced RC buildings has proven to be efficient.

• Management & Information Systems Review
• /
• 제39권1호
• /
• pp.75-91
• /
• 2020

The purpose of this study is to examine the application of in-depth interviews in terms of exploration on the basis of the theoretical basis of various aspects of consumer empathy, and the question of whether the consumer can expand to the process of self empathy. Most studies related to consumer empathy divide the responsive dimension of consumer empathy into rational and emotional dimension based on empathy theory, and look at the empathic response perceived by consumers to the stimulus presented from the current point of view. In this study, however, we want to go one step further and confirm that the consumers themselves can ultimately go to the self-empathy stage by forming a creative street of reproduction and redevelopment. As a result of exploratory research through in-depth interviews, it was indirectly confirmed that consumer's empathetic response to specific marketing stimulus exists at the level of creative and self-empathetic as well as the emphasis of previous studies. Based on these findings, this study confirmed that consumer empathetic responses could go beyond a single dimension to form a multidimensional structure and move toward an expanded structure of empathic self-creation. This suggests that consumers' empathic responses should be grasped in terms of continuity of empathic responses rather than explained in a specific dimension. Although this study is meaningful as an early research of exploratory nature, it is necessary to supplement various content validity and refine the research method through subsequent studies. This study is expected to expand the understanding that consumer's empathy can be extended to other people's empathy and to be self-empathy.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2005년도 춘계학술발표회
• /
• pp.147-154
• /
• 2005

The ship plating is generally subjected to combined in-plane load and lateral pressure loads. In-plane loads include axial load and edge shear, which are mainly induced by overall hull girder bending and torsion of the vessel. Lateral pressure is due to water pressure and cargo. These load components are not always applied simultaneously, but more than one can normally exist and interact Hence, for more rational and safe design of ship structures, it is of crucial importance to better understand the interaction relationship of the buckling and ultimate strength for ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except for the impact load due to slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are investigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Bulletin of the Society of Naval Architects of Korea
• /
• 제8권1호
• /
• pp.67-94
• /
• 1971

Korean fisheries industry holds 57,255 boats amounting to 269,079 tons in gross as of the end of 1967. The boats of the size under 30G.T., about sixty-two per cent of the total in tonnage, are utilized in coastal and their contribution to the total production of Korean fisheries industry is estimated at over seventy-five percent. Hull forms and construction method of them are partly in transition stage to the western tradition from the oriental tradition, which employs the chine-type straight-framed section, and tick and wide wooden planking fastened on naturally bent timber frames. And only about a half of them are mechanized. About fifty-seven per cent, 7,525 boats amounting to 91,751 gross tons, of the coastal and inshore fishing boats are those of the size ranging 5G.T. to 30G.T., which are engaged mostly in draft-and gill-netting, angling, longlining, anchovy seining, squid fishing and set-netting. The important fishing boats forming main structure of the inshore fishing fleets can be classified as 5G.T.-class multi-purpose boats, 10G.T.-class angling/longlining boats and 20G.T.-class drift-/gill-netters mostly utilized in the east-sea, 15G.T.-class anchovy seiner in the south-sea-sea, 20G.T.- and 28G.T.-class stow-netters in the west sea. Each of the three sea regions, east, south, and west, of Korean water has distinctly different characters from one another in topography, geology and sea aspects, and consequently in marine resources, fishing grounds and fishing tactics desired. Hence, the finishing boats in each sea region have also their own characters in hull form, structural features, deck design and equipments. In this report, analyzing the characteristics of the existing inshore fishing boats ranging 5G.T. to 30G.T. in size from view points of naval architecture and engineering, the author made an integrated investigation of their characteristics, covering size and principal dimensions, hull form, deck design, structural features and mechanization, in close connection with the natural circumstances of Korean water and local techno-socio-economic problems, and, finally, made some suggestions for the rational improvement or modernization of the inshore fishing boats. Further details of the characteristics of Korean inshore finishing boats are referred to the drawings of them compiled by the author and given in the reference[23] listed at the end of this report.

• Korean Business Review
• /
• 제13권
• /
• pp.179-193
• /
• 2000

It is not simple to manage software quality, because software development process and product itself are very complex. Recently ISO/IEC 15504- international standard for software process improvement, capability determination and development - was completed and applied to many local trials, and their results are being reported as registered local trials. The first step of software process assessment is established by examining whether its base practices are performed and which level they are achieved. And as far as assessment responsibility and credibility are concerned, assessment is generally performed by team-based assessors. Therefore assessment team construction and its preference of practice importances have a great effect on the credibility and the objectivity of assessment. In this paper, we analyse a SPICE-based software process assessment trial by comparing base practice importances of assessed processes, which are expressed through a real assessment, with its final rating results. Survey data are collected from assessors and interviewees who were engaged in the SPICE trial that was performed by ISO/IEC 15504, and final data analysis are derived from the factor analysis method. It is convinced that the result of this paper is able to enhance the credibility of software process assessment by provisions of objective and rational criteria and preference information for assessment team construction and base practice importances in future.

• Journal of the Korea Convergence Society
• /
• 제11권3호
• /
• pp.211-218
• /
• 2020

This study compared and analyzed the efficiency of the research results of the convergence research project operated by the National Science and Technology Research Council and the general research project carried out by the Government-funded research institute and proposed measures to enhance the efficiency of the operation and management of convergence research. Research data were collected from 21 government-funded research institutes through an information disclosure claim and DEA analysis was conducted for efficiency assessment. The SCI papers of convergence research showed high efficiency, and the patent registration and technology transfer sector showed high efficiency of general research projects. This indicates that convergence research projects for securing lead and original technologies are highly efficient, but their performance is low due to lack of participation by businesses in terms of the utilization of derived technologies, and more companies' participation and opportunities are needed for practical use of convergence research results. Through the analysis of efficiency of convergence research project performance, this study provided policy and guidance for R&D planning for rational investment of limited manpower and research costs. Further, future research on identifying efficiency is proposed depending on the type of technology subject to convergence research as a method for managing convergence research.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제14권1호
• /
• pp.9-14
• /
• 2004

Rational sense is affected by emotion. If we add the factor of estimated emotion by environment information into robots, we may get more intelligent and human-friendly robots. However, various sensory information and pattern classification are prescribed for robots to learn emotion so that the networks are suitable for the necessity of robots. Neural network has superior ability to extract character of system but neural network has defect of temporal cross talk and local minimum convergence. To solve the defects, many kinds of modular neural networks have been proposed because they divide a complex problem into simple several subproblems. The modular neural network, introduced by Jacobs and Jordan, shows an excellent ability of recomposition and recombination of complex work. On the other hand, the recurrent network acquires state representations and representations of state make the recurrent neural network suitable for diverse applications such as nonlinear prediction and modeling. In this paper, we applied recurrent network for the expert network in the modular neural network structure to learn data pattern based on emotional assessment. To show the performance of the proposed network, simulation of learning the environment and behavior pattern is proceeded with the real time implementation. The given problem is very complex and has too many cases to learn. The result will show the performance and good ability of the proposed network and will be compared with the result of other method, general modular neural network.

• Journal of Biomedical Engineering Research
• /
• 제25권6호
• /
• pp.531-536
• /
• 2004

In fracture treatment with external fixators, the inter-fragmentary movements at the fracture site affect the fracture healing process, and these movements are highly related to the stiffness of external fixation systems. Therefore, in order to provide the optimal fracture healing at the fracture site, it is essential to understand the relationship between the stiffness and the system configurations in external fixation system. In this study we investigated the influences of system configuration parameters on the stiffness in the finite element analysis of an external fixation system of a long bone. The system alignment, the geometric and the material non-linearity of the pin, the joint stiffness and the callus formation were considered in the finite element model. In the first, the system stiffness of the developed finite element model was compared with the experiment data for model validation. The consideration of the joint stiffness and nonlinearity of the model improved the system stiffness results. The joint stiffness, the non-alignment of the system decreased the system stiffness while the callus formation increased the system stiffness. The present results provided the biomechanical basis of rational guidelines for design improvements of external fixators and pre-op. planning to maximize the system stiffness in fracture surgery.

• Archives of design research
• /
• 제19권2호
• /
• pp.91-98
• /
• 2006

The product convergence and complex application environment raise the need of multi-modal interface which enables us to interact products through various human senses. The sense of vision has been used predominantly more than any other senses for the traditional and general information gathering situation, but in the future which will be developed based on the digital network technology, the practical use of the various senses will be desired for more convenient and rational usage of the information appliances. The sense of auditory which possibility of practical use is becoming higher than ever with the sense of vision, the possible usage will be developed broader and in the various ways in the future. Based on this situation, the characteristics of the written language and the colloquial language and the comparative analysis of the difference between male and female's reaction for each language were examined through this study. To achieve this purpose, the literature research about the diverse components of the language system was peformed. Then, some peculiar characters of the sense of vision and auditory were reviewed and the appropriate experimentation was planned and carried out. The result of the accomplished experimentation was examined by the objective analysis method. The main results of this study are as follows: first, the reaction time for written language is shorter than colloquial language, second, there is a partial difference between the male's and female's reaction for those two stimuli, third, there is no selection bias between the sense of sight and the sense of hearing. I think the continuous development of the broad and diverse ways of study for various senses is needed based on this study.

• 대한공업교육학회지
• /
• 제31권2호
• /
• pp.111-127
• /
• 2006

The purpose of this study is to analyze current recruiting examination and to categorize and construct test item that assess a variety of Mechanic Metal teachers in technical high school for appointing new Mechanic Metal teacher. The future developmental directions in this study are as follows: First, the examination for appointing secondary school new Mechanic Metal Teacher reflects the curriculum of the teacher education and technical high school, must be nomalize. Second, the rational readjustment of the basic necessary subjects for Machinery Metal recruiting examination is required. Third, the Mechanic Metal recruiting examination must prepare the criteria for the domain ratio of presenting problems and improve with level of presenting the question items which demands a knowledge, application and critical thinking. Fourth, in order to avoid the bias of the some subject tendency with committee making questions of different domain, more participation of a committee making questions is required. Fifth, the practical evaluation must be executed by the effective method to be able to make up for the limit of paper and pencil tests Sixth, as the long-term prospect to secure the professionalism of teacher, the recruiting examination of teachers must be carried out with the Machinery and Metal subject, respectively.