• 제목/요약/키워드: Rational

검색결과 4,051건 처리시간 0.03초

불확실한 하중을 받는 강재 보 구조물 안전도 모니터링을 위한 변형률 분포의 회귀 분석적 추정 (A Regression-Based Estimation of Strain Distribution for Safety Monitoring of the Steel Girder Subjected to Uncertain Loads)

  • 이지훈;최세운;박효선
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권2호
    • /
    • pp.10-20
    • /
    • 2013
  • 보 구조물의 안전성을 평가하기 위해서, 해당 부재의 구조적 상태를 보여주는 보여줄 수 있는 변형률을 기반으로 한 모니터링 시스템이 이용되고 있다. 하지만 최대 변형률과 같은 부재의 상태를 대표할 수 있는 변형률이 발생하는 정확한 위치에 센서를 설치하지 않은 한, 계측된 변형률을 토대로 합리적인 평가를 할 수 있게 하는 추가적인 프로세스가 필요하다. 이에 따라 본 연구는 변형률계에 의해 계측된 이산데이터를 이용하여 강재 보 구조물의 변형률 분포를 추정하는 기법을 제안한다. 본 기법에서는 보 구조물에 작용하는 하중을 미지의 하중으로 가정하였기 때문에, 실제 적용성을 향상 시켰다. 최종적인 변형률 분포는 회귀 분석을 통해서 함수 형태로 주어진다. 본 기법을 이용한 추정 성능을 검증하기 위해서 분포하중, 집중하중, 모멘트가 동시에 작용하는 강재 보 구조물의 휨 실험을 수행하였다. 실험을 통해 추정 변형률의 값을 직접 계측한 값과 비교해 본 결과, 임의의 위치에서도 절대 오차 $2.32{\mu}{\varepsilon}$ 이내로 변형률을 추정할 수 있었으며, 전체 변형률 분포는 3.32% 이내의 상대오차로 얻을 수 있었다. 따라서 강재 보 모니터링 시스템에 효과적으로 적용할 수 있을 것으로 기대된다.

임분(林分) 공간구조(空間構造) 분석(分析)을 위한 컴퓨터 프로그램의 개발(開發) (Development of a Computer Program for Stand Spatial Structure Analysis)

  • 신만용;오정수
    • 한국산림과학회지
    • /
    • 제88권3호
    • /
    • pp.389-399
    • /
    • 1999
  • 본 연구는 개체목의 위치를 포함하는 정밀 임분조사 자료를 이용하여 임분의 3차원 공간구조 분석이 가능한 컴퓨터 프로그램의 개발을 목적으로 수행되었다. 이 프로그램은 임분의 ha당 통계량 계산 등 양적 정보뿐만 아니라 직경, 수고, 재적분포, 그리고 3차원 임분 공간구조와 수관투영도 등의 시각적 정보를 제공하는 기능을 가지고 있다. 또한 컴퓨터 상에서 가상 시업 시뮬레이션을 통해 시업후의 임분구조를 시각적으로 확인할 수 있는 기능을 포함한다. 본 연구에서 개발된 프로그램의 통계분석 부분은 SAS의 분석결과와 비교하였고, 그래픽 정보의 표현 능력은 유사한 3차원 수관도 프로그램인 TreeDraw와 비교하였다. 그 결과 본 연구에서 개발된 프로그램은 자료분석 시간이나 결과의 요약 등 실용성 측면에서 우수한 것으로 나타났다. 본 프로그램을 이용할 경우 해당 임분에 대한 적합한 조림조치와 합리적인 경영에 필요한 다양한 임분 공간정보를 얻을 수 있어 사용자의 의사결정에 도움이 될 것으로 판단된다.

  • PDF

DEVS 통합개발환경 기반 모의 어뢰 표적탐지부 연동장비 개발 (Development of Torpedo Target Detection Section Interface Simulation System based on DEVS Integrated Development Environment)

  • 이민규;황근철;이동훈;나영인;김우식
    • 한국시뮬레이션학회논문지
    • /
    • 제24권1호
    • /
    • pp.25-34
    • /
    • 2015
  • 무기체계의 합리적인 요구사항 도출을 위해서는 많은 경험과 시행착오가 필요하지만, 현실적으로는 개발 비용과 위험 등의 이유로 M&S를 통한 접근이 일반적이다. 무기체계 획득 이외에도, 개발된 무기체계의 분석 또는 훈련을 목적으로도 M&S가 광범위하게 사용되고 있다. 국방과학연구소에서는 이러한 M&S의 필요성을 충족시키기 위해 모의실험 및 체계분석 구현에 필요한 M&S 공통기반기술 제공을 목적으로 해군 전투실험을 위한 DEVS 통합개발환경(QUEST)을 개발하였다. 본 논문에서는 모의 어뢰 표적탐지부 연동 아키텍처를 설계하고, QUEST의 무기체계 시뮬레이션 기능을 활용하여 모의 어뢰 표적탐지부 연동장비를 개발하였다. 모의 어뢰 표적탐지부 연동장비는 표적탐지 결과를 제공하는 어뢰 표적탐지부와 어뢰 표적탐지부의 성능 시험에서 필요한 시뮬레이션 시나리오를 제공하는 QUEST 시나리오 발생기로 구성된다. 모의 어뢰 표적탐지부 연동 아키텍처는 QUEST 시나리오 발생기와 어뢰 표적탐지부와의 연동을 통해 어뢰 표적탐지부의 성능 및 인터페이스를 검증할 수 있도록 설계되었다.

윤활유(潤滑油) 선미관(船尾管) 베어링 축계(軸系)의 준정적(準靜的) 평형상태(平衡狀態)에 관한 연구(硏究) (Quasi-Static Equilibrium of a Propeller Shaft in a Hydrodynamic Oil-Lubricated Stern Tube Bearing)

  • 안시영;김사수
    • 대한조선학회지
    • /
    • 제26권3호
    • /
    • pp.51-61
    • /
    • 1989
  • 최근(最近)의 배는 에너지 절약(節約)을 도모하기 위하여 프로펠러 회전수(回轉數)의 저속화(低速化)와 더불어 대형화(大型化)되고 있다. 이와 같은 결과(結果)로 선미관(船尾管)의 후부(後部) 베어링에는 집중하중(集中荷重)이 작용(作用)하게 되어 선박(船舶)의 운항능력(運航能力)을 상실할 정도의 대형사고(大型事故)가 일어나고 있는 예(例)가 많다. 이와 관련하여 최근(最近) 유막(油膜)을 고려한 선미관(船尾管) 베어링 해석(解析)에 관(關)한 연구(硏究)가 활발하게 이루워지고 있다. 본(本) 연구(硏究)에서는 지금까지 연구발표(硏究發表)된 유막(油膜)을 고려한 선미관(船尾管) 베어링에 대한 축(軸)의 위치(位置)를 추정(推定)하는 방법(方法)을 수정보완(修正補完)한 새로운 방법(方法)을 제시(提示)하였다. 즉 축계(軸系)에 대해서는 유한요소법(有限要素法)에 의한 삼차원(三次元) 구조해석방법(構造解析方法), 베어링 유막(油膜)은 유한요소법(有限要素法)에 의한 이차원(二次元) 유체역학해석방법(流體力學解析方法), 그리고 축계(軸系)와 베어링 유막간(油膜間)의 준정적(準靜的) 평형점(平衡點)을 구하기 위해서는 최적화(最適化) 기법(技法)이 사용된다. 본(本) 해석방법(解析方法)의 타당성(妥當性) 여부(與否)를 확인(確認)하기 위하여 Vorus 등이 사용(使用)한 시산대상선(試算對象船)에 대한 일련의 수치계산(數値計算)을 수행하고 동(同) 결과(結果)를 Vorus등의 연구 결과와 비교검토(比較檢討)하여 본 결과(結果), 비교적(比較的) 잘 일치(一致)하고 있음을 미루어 보아 본(本) 해석방법(解析方法)의 타당성(妥當性)이 확인(確認)되었다.

  • PDF

선체상갑판의 신뢰성해석 (Reliability Analysis of Ship Deck Structure)

  • 임상전;양영순;정기태;김창욱;서용석
    • 대한조선학회지
    • /
    • 제26권3호
    • /
    • pp.9-20
    • /
    • 1989
  • 선박 구조물의 구조설계 과정에서 구조물의 파괴가 일어나지 않도록 구조물의 안전도를 가능한한 높힌다는 것은 다른 무엇보다 중요하다. 또한 선체구조물의 안전도를 높히는데 있어, 선체구조 강도의 문제는 직접적인 관련이 있는데, 최근에는 종전에 해오던 규정에 의거한 경험적인 방법을 지양하고, 보다 합리적인 역학의 기본원리를 이용하는 직접계산법이 많이 시도되고 있다. 특히 안전계수를 바탕으로 하는 종전의 구조설계 방법에서는 선체에 작용하는 외력과 선체구조물의 최종강도가 갖고 있는 불확실성(uncertainty)을 충분히 고려하지 못한 공칭값(norminal value)을 사용하는 관계로 충분한 경험을 바탕으로 적용될 경우에 한해, 구조물의 안전성을 간접적으로 검토하게 되어, 최근 그 타당성 여부가 거론되고 있는 실정이다. 선체구조물의 안전성을 효율적으로 다루기 위해선, 첫째 하중해석, 둘째 거동해석, 셋째 안전도 해석의 세 단계가 거의 동등하게 다루어져야 하는데, 주로 파랑하중을 취급하는 첫째 단계와 유한요소법을 이용하는 둘째 단계가 거의 집중적으로 연구되어 왔다. 따라서 본 논문에서는 체계적인 신뢰도 해석 방법을 선박구조물에 적용하기 위해 우선 각종의 기본적인 신뢰도 해석 기법을 비교검토하여, 가장 효율적인 Advanced Level 2 방법을 정립하여, 선체구조 설계과정에서 중요한 선체 상갑판의 신뢰성 문제를 종전의 해석방법과 비교하여 그 유효성을 증명하였다.

  • PDF

신해양질서 10년후 세계어업자원 이용동향 (The Exploitation of World Fishery Resources for 10 Years under the New Regime in the Sea)

  • 이장욱;허영희
    • 수산경영론집
    • /
    • 제23권1호
    • /
    • pp.43-87
    • /
    • 1992
  • In this paper, state of exploitation of world fishery resources after 10 years under the new regime in the sea, called the era of exclusive economic zone (EEZ) expending up to a 200 nautical miles from coastal line, was reviewed to determine effect from establishing EEZ in the world fishery production and its export/import volume based on the fishery statistics annually published by the Food and Agriculture Organization (FAO) of United Nation. The world total production from marine living resources had a trend showing a waned increase during 1970's when most of coastal states were translated into the reality of EEZ. From mid-1980's onwards, it increased rapidly, reaching about 85 million tons . Such increase in production was basically from the Pacific Ocean, accounting for more than 60% of the world total production. Fishing areas where showed increase in the production after the new regime in the sea were the southwestern Atlantic (FAO area 41) , the eastern Indian (FAO area 57) and the whole fishing areas in the Pacific except the eastern central Pacific (FAO area 77). Increase in the production from distant-water fishing countries came from the regions of the southwest Atlantic (FAO area 41) and the southwest Pacific (FAO area 81) . The production from coastal states was up from the regions of the eastern Indian (FAO area 57) , the northwest and northeast Pacific (FAO areas 61 and 67) and the southeast Pacific (FAO area 87) . It was likely that the exploitation of the fishable stocks was well monitored in the areas of the northwest Atlantic (FAO area 21) , the eastern central Atlantic (FAO area 34) and the northeast Pacific (FAO area 67) through appropriate management measures such as annual harvest level, establishment of total allowable catch etc. The marine fisheries resources that have made contribution to the world production, despite expansion of 200 EEZ by coastal states, were sardinellas, Atlantic cod, blue whiting and squids in the Atlantic Ocean : tunas which mainly include skipjack, yellowfin and bigeye tuna, croakers and pony fishes in the Indian Ocean : and sardine, Chilean pilchard, Alaska pollock, tunas (skipjack and yellowfin tuna) , blue grenadier and blue whiting including anchoveta in the Pacific Ocean. It was identified that both fishery production and its export since introduction of the new regime in the sea were dominated by such coastal states as USA, Canada, Indonesia, Thailand, Mexico, South Africa and Newzealand. But difficulties have been experienced in the European countries including Norway, Spain, Japan and Rep. of Korea. Therefore, majority of coastal states are unlikely to have yet undertaken proper utilization as well as rational management of marine living resources in their jurisdiction during the last two decades. The main target species groups which led the world fishery production to go up were Alaska pollock, cods, tunas, sardinellas, chub and jack mackerel and anchoveta. These stocks are largely expected to continue to contribute to the production. The fisheries resources which are unexploited, underexploited and/or lightly exploited at present and which will be contributed to the world production in future are identified with cephalopods, Pacific jack mackerel and Atlantic mackerel, silver hake including anchovies. These resources mainly distribute in the Pacific regions, especially FAO statistical fishing areas 67, 77 and 87. It was likely to premature to conclude that the new regime in the sea was only in favour of coastal states in fishey production.

  • PDF

근대주의 건축에서 모더니티 표상의 문제 - 장식의 배제와 표면의 부각을 중심으로 - (Presentation and Representation of Modernity in Modern Architecture - On Exclusion of Ornament and Emergence of the surface -)

  • 강혁
    • 건축역사연구
    • /
    • 제15권4호
    • /
    • pp.37-56
    • /
    • 2006
  • Introducing International Style, P. Johnson and H. R. Hitchcock gave three standards to be the Modern, volume and surface, regularity, and exclusion of applied decoration. In spite of the negation of stylistic, formal approach in the Modernist Manifestoes, one usually have understood Modernity in Architecture with its formal character, especially with no ornament and flat, abstract, white surface. Modernism as a new paradigm in architecture have emphasized that there is no representation of anything outside and only present architecture in itself. They said that Modernism only cared about the language of Architecture without figural reference. So apparently there is no way to prove to its Modernity with formal condition. Modernity is in Spirit and contents. But actually we understand well its existence by visual communication This study deals with this difficult situation how Modernity represents itself without visual media and asks the question how simultaneously it presents its thingness and materiality In order to analyse contradictory situation between representation and presentation in Modern Architecture we need to survey the historical process of changing position of ornaments and its meaning in time. With the crisis of representation the role of ornament have seriously changed and divided. It caused the two situation in pre-Modern Architecture. Firstly, Architecture tend to be a high art and formal expression became important much more. The Use of Ornament became a kind of fashion to show the power, class, money. Secondly, Ornament lost its cultural weight and the structure and material aspect became the central in architecture. Rational Structuralism would be the essential character in Modern Architecture. Here the theory of G. Semper and A. Loos on cladding(dressing) and Ornament can help its problems and limits. In the situation without conventional ornament Modernists need to present modernity with new media that only show the thing itself and by that it does not represent any thing else as like the value, idea outside buildings. They believed that only it concerned esthetics and morality in architecture. But in reality it referred to art and machines as like ships, aircraft, and cars. By excluding Ornament and showing the process of clearing, abstract, flat, white surface 'represent' Modernity by the indirect way referring the concept of transparency, reason, sanitation, tectonics, etc. An Ideology and myth intervened architectural discourse to make the doxa about the representation in Architecture. Surface must be a different kind of media and message that can communicate in different way with compared to conventional Ornament. Decorated Shed by R. Venturi and Post-Functionalism by P. Eisenman, that are the most famous post-modern discourse, shows well difficult and contradictory condition in contemporary architecture concerning representation and form, meaning and form.

  • PDF

REBT 진로 집단상담이 경력단절 30대 기혼여성의 자기효능감과 진로태도성숙에 미치는 효과 (The Effects of REBT Career Group Counseling on Self-Efficacy and Career Attitude Maturity of the Career-Inturrupted Married Women in Thirties)

  • 여숙현;김명식
    • 디지털융복합연구
    • /
    • 제14권9호
    • /
    • pp.571-577
    • /
    • 2016
  • 최근에 경력단절 여성의 진로와 사회참여에 대한 문제가 많은 주목을 받고 있고, 주요한 사회적 문제로 대두되고 있다. 본 연구는 경력단절 30대 기혼여성에게 REBT 이론을 적용한 진로 집단상담 프로그램을 구성 및 실시하여, 그들의 자기효능감과 진로태도성숙에 미치는 긍정적 효과를 검증하고자 하였다. 연구대상은 J시 소재 초등학교 자녀를 둔 30대 경력단절 기혼여성 45명이었다. 본 연구에 지원한 45명을 상담집단(REBT 집단), 통제집단1(일반부모 교육 집단)과 통제집단2(직업상담사 교육집단) 3집단에 각 15명씩 무선배정하고 사전-사후 비교를 실시했다. 측정도구는 자기효능감 척도와 진로태도성숙도 척도를 사용하였다. 본 연구결과 REBT 진로 집단상담집단이 통제집단에 비해 자기효능감, 사회효능감, 자기효능감(전체) 등이 사후에 증진되었다. 또한 REBT 진로 집단상담집단이 통제집단에 비해 진로태도성숙도의 현실성, 준비성, 결정성, 진로성숙도(전체)가 증가하는 경향을 보여주었다. 본 연구를 통해 REBT 진로 집단상담이 경력단절 30대 기혼여성의 진로와 경력에 대한 비합리적 신념을 보다 합리적이고 현실적인 신념으로 변화시킴으로써 자기효능감과 진로태도성숙도가 긍정적으로 변화되었다고 할 수 있다. 본 연구의 의의와 한계점, 향후 연구방향이 논의되었다.

비선형 정적해석을 통한 횡저항 시스템의 보유성능 평가 및 설계방안 연구 (Design of Lateral Load Resisting System using Nonlinear Static Analysis)

  • 송진규;김건우;정성진;송영훈;이승창
    • 한국지진공학회논문집
    • /
    • 제10권1호
    • /
    • pp.9-16
    • /
    • 2006
  • 횡저항 시스템의 설계는 구조 엔지니어의 경험과 노하우에 의존하는 경향이 크다. 또한 건물의 보유성능을 평가하여 설계과정에 적절히 반영할 수 있는 방법이 제시되어있지 않다. 따라서 본 연구에서는 구조물이 실제 보유하고 있는 유효보유성능(available full capacity, $R_{ac}$)과 설계기준에서 제시하고 있는 요구보유성능(minimum required capacity, $R_{code}$)에 의해 건물의 횡저항 시스템을 합리적으로 설계하는 방안을 제시하고자 한다. 제안 방법은 기존 구조 설계과정에 비선형 해석에 의한 횡저항 성능 평가가 추가된 것으로, 우선 기본 설계를 마친 후, 푸쉬오버(pushover)해석을 통해 구조물의 실제 횡저항 성능을 평가한다. 비선형 평가단계에서는 푸쉬오버(pushover) 해석을 수행하고 이선형화를 통해 항복밑면전단력$(V_Y)$을 결정한다. 그리고 설계풍밑면전단력$(V_{wind})$이 설계지진밑면전단력$(V_D)$보다 큰 경우 항복밑면전단력보다 설계풍밑면전단력이 작은 값임을 확인한 후에, 구조물이 보유한 $R_{ac}$를 산정한다. 설계지진밑면전단력이 큰 경우에는 바로 유효보유성능을 산정하고 이 유효 보유성능$(R_{ac})$이 요구보유성능$(R_{code})$에 근접하도록 피드백 과정을 통하여 부재를 재설계한다. 본 논문에서는 간단한 2차원 철골 가새가 설치된 철근콘크리트 구조를 이용하여 두 가지 경우에 대하여 제안한 합리적인 횡저항 시스템의 설계를 적용하였다. 그 결과 기본설계와 비선형 정적해석의 피드백 과정의 반복을 통하여 요구보유 성능에 근접한 유효보유성능을 갖는 횡저항 시스템을 설계하는 것이 가능하였다.

GIS를 이용한 화재진압 취약성 지도 제작 - 대구광역시 달서구를 사례로 - (Producing Firefighting Vulnerability Maps Using GIS - A Case Study of Dalseo-gu, Daegu -)

  • 김성재;최갑용;장은미;송완영
    • 한국지리정보학회지
    • /
    • 제18권3호
    • /
    • pp.11-20
    • /
    • 2015
  • 매년 발생하고 있는 화재사고는 많은 재산과 인명의 피해를 안겨주고 있다. 이러한 피해를 최소화하고 적절한 사고대응을 하기 위하여 많은 시간과 비용을 투자해 오고 있으며, 최근 들어서는 공간정보 기술이 발달함에 따라 소방분야에서도 GIS(Geographic Information System)를 활용한 화재진압 관련 연구들이 많이 수행되어져 오고 있다. 그러나 대부분의 연구들이 소방 관련 요소들에 대한 개별적인 분석만 이루어지고 있을 뿐 소방 활동의 주요 임무인 화재진압 활동 취약요소들에 대한 종합적 분석 연구는 미진한 실정이다. 본 연구에서는 원활한 화재진압 활동을 함에 있어 방해되는 요소들을 파악 및 분석하고, 이와 관련된 데이터들을 수집하여 GIS DB화를 수행하였다. 이를 기반으로 GIS 중첩분석을 수행하여 화재진압 취약성 지도를 제작하였다. 본 연구를 통하여 화재진압 활동 저해 요소들에 대한 정량적 분석이 가능함으로써 골든타임 확보를 위한 화재진압 운영계획등과 같이 소방관련 종사자들에게 합리적인 의사결정을 지원할 수 있을 것으로 판단된다.