• Investigative Magnetic Resonance Imaging
• /
• v.11 no.1
• /
• pp.20-26
• /
• 2007

Purpose : The purpose of the present study was to develop and optimize solenoid coil for animal- model in 3 T MRI system and investigate and compare with the birdcage coil concerning the image quality with the various parameters such as SNR and Q-factor. Materials and Methods : Solenoid coil for animal-model was made on the acryl structure (diameter 4 cm, length 10 cm) 3 times-winding cooper tape of width 2 cm, thickness 0.05 cm and length 10 cm with 2 cm interval between winded tapes. Capacitors from 2 pF to 100 pF were used, and the solenoid coil was designed for receiver only coil. Results : SNR of the developed solenoid was 985 in CuSO4 0.7 g/L and 995 in rat experiment. Q-factor was 84-89 in unloaded condition and 203-206 in loaded condition. Conclusion : The resolution of the image obtained from solenoid was relatively higher than that of the conventional birdcage coil. In addition, the homogeneity of RF field by coil simulation was significantly excellent. The present study demonstrated that the solenoid coil could be useful to obtain small animal images with better contrast, resolution, visibility than images from birdcage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.262-270
• /
• 2012

This research was performed to find out the root characteristics of sweetpotato (Ipomoea batatas LAM.) cultivars according to the cultivation regions. Total 10 sweetpotato culivars, 6 yellow, 2 purple and 2 orange, were used for experiment. Samples were cultivated in Muan, Iksan, Nonsan, Boryeong and Hamyang. Precipitation and average temperature during the growth period of sweetpotato cultivation were 882~1,682 mm and 16.7~$28.2^{\circ}C$, respectively. Accumulated temperature was 3,122~$3,282^{\circ}C$. Soil texture was found of sandy loam in Muan, Iksan and Boryeong, sandy clay loam in Nonsan, and loam in Hamyang. The yield of root, dry matter content, starch value and soluble solids contents were high in Muan. The length/width ratio was high in Hamyang. The color values of sweetpotatoes were high in Nonsan. The protein content of sweetpotato powder was high in the Iksan, crude fat content and ash content were high in the Hamyang. The results of this study, we could see that root characteristics of sweetpotato in the same cultivars appeared differently depending on the cultivated regions.

• Korean Journal of Environmental Biology
• /
• v.17 no.3
• /
• pp.359-364
• /
• 1999

The effect of Salicylic acid (SA) on the leaf growth, chlorophyll content, photosynthesis, stomatal conductance in Commelina communis L. was investigated. C. communis which was grown in Hoagland solution containing 1 mM SA during 3 weeks resulted in a significant reduction of leaf length, width and area. 1 mM SA reduced about 10% of the leaf area at 1 week and 2 weeks, but inhibited 22% of the leaf area at 3 weeks. SA also showed great effect on the reduction of chlorophyll content. SA reduced 47% and 53% of chlorophyll content each at 2 weeks and 3 weeks when it was compared with the control. Chlorophyll a/b ratio in SA treated sample was increased at 3 weeks representing that SA was sensitive to chlorophyll b. The treatment of SA did not inhibit the activity of PSII＋PSI, PSII and PSI. This result indicates that SA did not show direct effect oil the photosynthetic electron transport activity. However, when C. communis was grown in Hoagland solution containing I mM SA fer long period, SA showed clear inhibition of photosyhthesis in intact leaves. The treatment of SA for 3 weeks showed about 23~65% inhibition of photosynthetic activity at various light intensity (100~1000$\mu$mo1 m­$^2$S­$^1$). Similar effect was found on stomatal conductance. The treatment of SA caused an almost closure of stomata. Similar effects of stomatal conductance at various light intensity indicate a loss of normal control on stomatal mechanism. These results indicate that the effect of SA on photo-synthetic activity was not by SA itself but by indirect metabolic pathway.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.40-49
• /
• 2018

It is reported that the causes of unaesthetic proportion of anterior teeth vary widely. Especially, when the unaesthetic tooth proportion of the mandibular incisors arises due to the wear of the anterior teeth accompanied by the compensation of the alveolar bone, it may cause serious functional and aesthetic problems. In such case, it should be considered that the evaluation of vertical dimension and tooth proportion as well as smile line, soft tissue and hard tissue morphology. And, increase of vertical dimension or clinical crown lengthening followed by prosthodontic restorations is needed to improve the interdental mesial/distal, width/length ratio considering the anterior guidance. This case report demonstrates functional and aesthetic improvements through systematic diagnosis and treatment procedures in a 48-year-old male patient with unaesthetic anterior teeth proportion because of tooth wear accompanied by the compensation of alveolar bone and defect of several central incisors due to chronic periodontitis.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.149-157
• /
• 2004

We have calculated the power extraction efficiency and the lasing wavelength distribution of complex-coupled(CC) DFB lasers above threshold for various｜$\chi$L｜ and facet reflectivity combinations, and we have compared the results with those at threshold. Also, we have investigated the effect of coupling coefficient ratio(CR) and the reflectivity of AR facet on the power extraction efficiency and the lasing wavelength distribution. At threshold, the single mode yield as a function of power extraction efficiency of in-phase(IP) CC DFB lasers is the same as that of anti-phase(AP) CC DFB lasers. Above threshold, however, the single mode yield as a function of power extraction efficiency of IP CC DFB lasers is much larger than that of AP CC DFB lasers. For IP CC DFB lasers, AR-HR combination has high single mode yield and large power extraction efficiency compared to other facet combinations. IP CC DFB laser with AR-HR combination for ｜$\chi$L｜of 0.8 has the highest single mode yield and largest power extraction efficiency above threshold among the cases considered. For AR-HR combination, as CR increases and the reflectivity of AR facet decreases, both single mode yield and power extraction efficiency increase due to the reduction of the spatial hole burning effect. For AR-HR combination, the lasing wavelength of CC DFB laser has distributed over the stopband of DFB. As CR increases, the lasing wavelength concentrates on the long wavelength side for IP CC DFB laser, while on the short wavelength side for AP CC DFB laser. As ｜$\chi$L｜ increases, the width of the wavelength distribution decreases and the lasing wavelength moves to the long wavelength side.

• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.140-144
• /
• 1997

This experiment was carried out to investigate the proper planting method of Rehmannia glutinasa Liboschitz. A Chungbuk local cultivar was sown on the seed bed of 200cm with the planting density of 30cm(6 rows) $\times$ 8.5cm(30 rhizome per $\textrm{m}^2$). The experimental design was randomized block design with 3 replications. And the result was summarized as follows. The emergence date of level Planting(control : 0$^{\circ}$) was May 23, but the emergence dates of Oblique planting(45$^{\circ}$) and Upright planting(90$^{\circ}$) treatments were later than the control by 2~4 days. And the leaf length and the ratio of leaf length/leaf width were not significantly different. As compared with the 29.2cm and 10.0mm of the rhizome length and the rhizome diameter of level planting treatment, the rhizome length of Oblique planting treatment was decreased by 3.4cm and 0 mm. The length and diameter of rhizome of the Upright planting treatment was decreased by 2.8cm and 1.0mm. And the order of sugar content was level Planting > Oblique planting > Upright planting. The total yields were decreased by 9% in the Oblique planting and by 15% in the Upright planting compared to 1,203kg/10a in the control, and the commercial yields showed the same tendency. The level planting treatment was found to be most proper for sowing of Rehmannia glutinasa Liboschitz in the middle inland region of Korea.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.129-138
• /
• 2006

In this study, we identified the secondary precipitates from Samsan-jeil and Sambong mine, Goseong, Gyeongnam by means of scanning electron microscopy, electron probe microanalysis and X-ray powder diffraction analysis. Copper sulfide minerals had been produced from the mines during last few decades, however they are not worked. White and blue precipitates were found at the downstream of mine rock dump at Sambong mine and green one was at Samsan-jeil mine. The white precipitate covered the host rock surface with thickness of $30{\mu}m$, and is a kind of diatom with $10{\mu}m$ in length and $3{\mu}m$ in width. It is a species Fragilaria constuens, which is contained a order Pennales(pennate diatom) and lives in fresh water. The blue precipitate is the alteration product of chalcopyrite. It resultes in the increase in the ratio Cu:Fe from 5 to 13. The green precipitate has worm-like morphology with $10{\sim}20nm$ in diameter and $200{\sim}300nm$ in length. It is mainly composed of secondary copper sulfate such as woodwardite. However, it could be formed by the activity of microorganism, because the copper content is more than any secondary copper sulfate reported in copper sulfide mine. In order to identity the green precipitate exactly, the further research is needed.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.97-105
• /
• 2017

BACKGROUND : Environmental stress has a major effect on the growth and yields of vegetables, and can significantly affect nutritionally important phytochemicals, causing large economic losses. METHODS AND RESULTS : The present study was aimed at exploring the effects of water stress on the carotenoid and proline contents in kale leaves to understand drought tolerance of kale plants. Kale was randomly divided into two groups at 57 days after sowing (DAS). One of the groups was well-watered (WW) and the other was water stressed (WS). Harvesting of kale leaves was started one day after treatment (58 DAS) and continued for 10 days (~67 DAS). We investigated the status of plant growth (leaf number, length, width, fresh weight) of kale throughout the study. Carotenoid (lutein, ${\alpha}-carotene$, zeaxanthin, ${\beta}-carotene$) and proline contents were analyzed by high-performance liquid chromatography (HPLC). Our results showed that the total carotenoid contents ranged from 926.0 to 1,212.0 mg/kg dry wt. (at 3 and 2 days, respectively) in WW treatment and 887.8 to 1,157.4 mg/kg dry wt. (at 10 and 4 days, respectively) in WS treatment. The ratio of individual carotenoid to the total carotenoid contents of kale leaves was 51.4 for lutein, 4.44 for zeaxanthin, 2.76 for ${\alpha}-carotene$, and 41.4% for ${\beta}-carotene$. Total carotenoid contents showed a significant reduction from 7 days (1,037.2 mg/kg dry wt.) to 10 days (887.8 mg/kg dry wt.) in WS treatment. The lutein content did not show a significant difference in WW between 7 and 10 days after treatment but showed a significant difference in WS treatment. The ${\alpha}-carotene$ content showed no significant difference between the treatments. However, zeaxanthin content was higher during 4-10 days and ${\beta}-carotene$ content was lower during 6-10 days in WS than in WW on each harvest day. In WW, the proline content showed no significant difference, but in WS, the proline content started to increase at 7 days and almost doubled in 10 days. CONCLUSION : The marked increase in zeaxanthin and proline contents in kale leaves indicated that the two phytochemicals are associated with drought tolerance in the plant.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.211-217
• /
• 2008

To build up data for mutation breeding of lily, sensitivity to irradiation of bulb, seed and pollen was investigated. The bulbs of seven cultivars including 'New Wave' were very sensitive to gamma rays. Non-irradiated bulbs produced plants with bloom as normal. However, irradiated bulbs showed retarded growth and did not flower. Bulbs of 'New Wave' and 'Tiny Dino' irradiated with 125Gy gamma rays survived, but their growth rate dropped considerably. Part or whole leaves of the other cultivars except 'New Wave' and 'Tiny Dino' withered. Moisture content of individual scale was 72~78% depending on cultivar. Bulblet formation from untreated scales was 100%. Among all irradiated scales only 'Siberia' scales showed 8.5% bulblet formation when irradiated with 50Gy gamma rays. Pollen germination as affected by gamma ray irradiation had no consistent tendency. When dosage of $F_1$ 'Augusta' seeds reached 300Gy, their survival ratio was drastically decreased. Bulblet formation in vitro was observed only in non-irradiated seeds. Lethal dose ($LD_{50}$) of seed was less than 100Gy. Height and width of $F_1$ 'Augusta' bulblets in vitro irradiated with gamma rays decreased as dosage increased regardless of the culture method. The percentage shoot formation was 100% in non-irradiated bulblets and 15~60% in irradiated ones.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.685-694
• /
• 2016

Visibility of lane marking is impaired at night, or in case of rain, and thereby threatens traffic safety. Recently, various studies and technology have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment, improvement of lane marking visibility (32.7%) by applying phosphorescent material mixed paint, and expressway lane design standards alternative (length 6m, gap 12m, width 13cm: 27.8% of painted surface are reduced) adoption with ergonomic analysis. In this study, a set of cost-benefit analyses was performed for the cases where such techniques were applied. Based on the literature review, 26.9% of traffic accidents would be prevented by improving lane marking visibility by 32.7%; accident reduction benefit was calculated as much as 12.5 billion KRW. Meanwhile, total increased cost when introducing phosphorescent material mixed paint and lane design standards alternative is calculated as 30.6 billion KRW. However, economic feasibility could not be secured with 0.41 of cost-benefit ratio when applied to the expressway network as a whole. Additionally, cost-benefit (B/C) analysis was applied to each of the top 20 night accident hot spots and the results of B/C ratios were between 0.67 and 4.20, showing that 11 out of 20 spot sections of expressway can have economic feasibility. This results indicate, with this kind of pavement marking applied to accident hot spots in rural expressway, better visibility and economic feasibility can be guaranteed through traffic accident reduction. Some limitations and future research agenda have also been discussed.