• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.450-457
• /
• 2020

Single pellet press technology allows for fast, low-cost, and small-scale tests to investigate pelletizing characteristics. We estimated proper compression ratios for five Korean domestic wood species through predicted relationships between pelletizing pressure P_x and compression ratio based on experimental data obtained from a single pellet press unit. The pressures required to obtain a 6-mm-diam pellet of density 1200 kg/㎥ were estimated as 111 MPa for Populus davidiana, 133 MPa for Robinia pseudoacacia, 136 MPa for Quercus mongolica, 97 MPa for Pinus densiflora, and 127 MPa for Pinus rigida. On the basis of these pressures, we estimated proper compression ratios to be within the range 7.676-8.410 for these species, and we found the compression ratios needed for hardwood species to be somewhat higher than those needed for softwood species to obtain the pellet density of 1200 kg/㎥.

• ALGAE
• /
• v.32 no.4
• /
• pp.275-284
• /
• 2017

Microcystis aeruginosa causes harmful algal blooms in the Nakdong River of Korea. We studied the effect of different concentrations and ratios of ammonium ($NH_4{^+}$), nitrate ($NO_3{^-}$), and phosphate ($PO{_4}^{3-}$) on growth of this species in BG-11 medium: each nutrient alone, $NO_3{^-}:NH_4{^+}$ ratio, the N : P ratio with fixed total N (TN), and the N : P ratio with fixed total P (TP). The single nutrient experiments indicated that M. aeruginosa had the highest growth rate at $NH_4{^+}$ and $NO_3{^-}$ concentrations of $500{\mu}M$, and at a $PO{_4}^{3-}$ concentration of $5{\mu}M$. The $NO_3{^-}:NH_4{^+}$ ratio experiments showed that M. aeruginosa had the highest growth rate at a ratio of 1 : 1 when TN was $100{\mu}M$ and $250{\mu}M$, and the lowest growth rate at a ratio of 1 : 1 when the TN was $500{\mu}M$. The N : P ratio with fixed TN experiments indicated that M. aeruginosa had the highest growth rates at 50 : 1, 20 : 1, and 100 : 1 ratios when the TN was 100, 250, and $500{\mu}M$, respectively. In contrast, the N : P ratio with fixed TP experiments showed that M. aeruginosa had the highest growth rates at 200 : 1 ratio at all tested TP concentrations. In conclusion, our results imply that the $NO_3{^-}:NH_4{^+}$ ratio and the $PO{_4}^{3-}$ concentration affect the early stage of growth of M. aeruginosa. In particular, our results suggest that the maximum growth of M. aeruginosa is not simply affected by the $NO_3{^-}:NH_4{^+}$ ratio and the N : P ratio, but is determined by the TN concentration if a certain minimum $PO{_4}^{3-}$ concentration is present.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.5
• /
• pp.53-60
• /
• 2010

The effects of blast furnace slag, hwang-toh, and reinforcing fiber on the physical and mechanical properties of porous concrete using blast furnace slag coarse aggregates have been evaluated in this study. The effect of the depending on replacement ratio of blast furnace slag to cement was investigated such that the replacement ratio was varied to 0 %, 25 % and 50 %. Also, the replacement ratios of hwang-toh were 0, 20 and 30 %. The polyvinyl alcohol fiber was used for the reinforcing fiber. A series of pH, unit mass, and void ratio tests have been performed to study the physical properties of the porous concrete using blast furnace slag coarse aggregates with the polyvinyl alcohol fiber and the replacement ratios of blast furnace slag, hwang-toh, while a series of compressive tests have been performed to evaluate the strength property depending on polyvinyl alcohol fiber and the replacement ratios of blast furnace slag, hwang-toh. The test results indicated that the physical and mechanical properties of porous concrete using blast furnace slag coarse aggregates is affected by the replacement ratio of blast furnace slag, and the fiber contents. According to the tests with polyvinyl alcohol fiber contents, the void ratio was decreased and the compressive strength was upgraded.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.11-17
• /
• 2006

We have theoretically investigated the effects of the interplay between the driving voltage of Mach-Zehnder(MZ) modulators and the bandwidth of low-pass filters(LPF) in 10[Gb/s] duobinary modulation systems. For the change of driving voltage ratios(driving voltage/switching voltage), the transmission performance has been evaluated over 200[km] of single-mode fiber(SMF) systems. For driving voltage ratios with smaller than 100[%], the transmission performance has been maintained and greatly affected by the bandwidth of LPFs than the driving voltage. For driving voltage ratios with larger than 100[%], the transmission performance has been degraded and is not sensitive to the bandwidth of LPFs. To see the limitation of driving voltage, we have reduced the driving voltage ratio to 50[%]. Our results suggest that 10[Gb/s] duobinary signals with driving voltage ratio with smaller than 100[%] have been transmitted over 200[km] SMF within 2[dB] power penalty without dispersion compensation. For the driving voltage ratio with 50[%], we have verified that the transmission performance was maintained.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.746-751
• /
• 2001

We used a cylindrical model which simulates turbine blade leading edge to investigate the effects of free-stream turbulence intensity and blowing ratio on film cooling of turbine blade leading edge. Tests are carried out in a low-speed wind tunnel on a cylindrical model with three rows of injection holes. Mainstream Reynolds number based on the cylinder diameter was $7.1\times10^4$. Two types of turbulence grid are used to increase a free-stream turbulence intensity. The effect of coolant blowing ratio was studied for various blowing ratios. For each blowing ratios, wall temperatures around the surface of the test model are measured by thermocouples installed inside the model. Results show that blowing ratios have small effect on spanwise-averaged film effectiveness at high free-stream turbulence intensity. However, an increase in free-stream turbulence intensity enhances significantly spanwise-averaged film effectiveness at low blowing ratio.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.407-410
• /
• 2012

The properties of Al-doped ZnO (AZO) films were investigated as a function of H2/(Ar + H2) gas ratio using an AZO (2 wt% Al2O3) ceramic target in a radio frequency (RF) magnetron sputtering system. The deposition process was done at 200 ℃ and in 2 × 10-2Torr working pressure and with various ratios of H2/(Ar + H2) gas. During the AZO film deposition process, partial H2 gas affected the AZO film characteristics. The electron resistivity (~ 9.21 × 10-4 Ωcm) was lowest and mobility (~17.8 ㎠/Vs) was highest in AZO films when the H2/(Ar + H2) gas ratio was 2.5%. When the H2/(Ar + H2) gas ratio was increased above 2.5%, the electron resistivity increased and mobility decreased with increasing H2/(Ar + H2) gas ratio in AZO films. The carrier concentration increased with increasing H2/(Ar + H2) gas ratio from 0% to 7.5%. This phenomenon was explained by reaction of hydrogen and oxygen and additional formation of oxygen vacancy. The average optical transmission in the visible light wavelength region over 90% and an orientation of the deposition was [002] orientation for AZO films grown with all H2/(Ar + H2) gas ratios.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.198-207
• /
• 2010

Many methods and techniques have been developed to obtain the accurate design parameters in soft soils. In particular, several researchers suggest the techniques to get the void ratio for understanding the soil behavior. The objective of this paper verifies the accuracy of the proposed analytical solution for determining the void ratio based on the elastic wave velocities. The paper covers the theories of Wood, Biot, Gassmann and Foti proposed chronological order. The total theory represents the wave propagation in fully saturated medium. To verify the proposed analytical solution, the laboratory and field tests are carried out. After measuring the elastic wave, the void ratios are assessed using proposed equation. The volume based void ratios are also obtained for comparing with the estimated value by several equations. The values estimated by volume, Gassmann and Biot are show good similarity. However, the void ratios based on Wood and Foti methods have a slightly different trend. This study suggests that the theories of Biot and Gassmann may be a useful equation for assessing the void ratio using elastic wave velocities in the field.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.2
• /
• pp.75-87
• /
• 2020

This paper aims to not only investigate the nature of financial security and its measurement, but also to compare financial security level in 629 listed companies divided into four different industries (materials, industrials, health care, and consumer goods) before building a theoretical framework and regression models to examine the determinants of financial security. By gathering 2,167 financial statements published in Vietnamese Stock Exchange during eight years from 2012 to 2019, with the support of STATA, the research results indicate that six different internal factors, which are liquidity, profitability, firm size, debt management ratios, asset management ratios, and cash flows, explain 77.7% the change of financial security ratio and 3.4% the change in sustainable growth ratio. Specifically, while firm size has a positive impact on sustainable growth ratio but a negative impact on financial security ratio, deb management and profitability have an insignificant influence on the financial security level. Furthermore, an increase in asset management ratios would result positively in both two dependent variables whereas a rise in sustainable growth and a decline in financial security ratio are expected to witness if there is an increase in cash flows.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.4
• /
• pp.152-158
• /
• 2007

This is a fundamental research to utilize alkali activated cement(AAC) in concrete. The compressive strength of AAC concrete were measured for the various mixing ratios of activator/fly ash, and the mixing ratios of water glass, NaOH, and water among the activators. The mixing ratio of fine and coarse aggregates was maintained constantly. The relationships between the compressive strength and mixing ratios were analyzed to find the optimal mixing ratio of AAC concrete. As the results, the optimal mixing ratio of activator/fly ash in AAC concrete was 0.7, and that of water glass, NaOH, water among the activator was 4.0:1.0:2.5 for the maximum compressive strength.

• Textile Coloration and Finishing
• /
• v.12 no.2
• /
• pp.103-110
• /
• 2000

To examine the physical properties of POY through the microstructure control, the crystal structure such as the crystallinity, the crystallite size, the orientation, the shrinkage, the tensile properties, and the thermal stress of POY(80/48, SD) were examined at different draw ratios and annealing temperatures. From the examination following conclusions were obtained : 1. The crystallinity was more effected by the heat setting temperature than by the draw ratio. The increasing rate was greatest at the heat setting temperature range of $170~190^\circ{C}$. 2. The crystallite size perpendicular to the fiber axis was more effected by the annealing temperature at lower draw ratios. On the other hand, the crystal and amorphous orientations were more effected by the heat setting at higher draw ratios. 3. The boiling shrinkage did not change significantly, but the total shrinkage showed 13% at the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$. 4. The maximum thermal stress increased with increasing the draw ratio and decreasing the heat setting temperature in the temperature range of $170~210^\circ{C}$. At the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$, the maximum thermal stress found was 1.1gf/d. 5. In the heat setting temperature above $170^\circ{C}$ after the drawing, the crystallinity, the crystallite size, the orientation, and the strength increased with increasing temperature, but the shrinkage and the maximum thermal stress decreased with increasing temperature.