• Korean Journal of Computational Design and Engineering
• /
• v.6 no.3
• /
• pp.206-214
• /
• 2001

This paper describes the wire EDM (Electric Discharge Machining) CAM system considering a variable taper wire-cut and an unmanned wire EDM during the night. Wire EDM is applicable to all materials that are fairly good electrical conductors, including metals, alloys and most carbide. Thus it provides a relatively simple method for making holes of any desired cross section in materials that are too hard or brittle to be machined by most other methods. In this paper we classify variable taper wire-cut machining patterns and variable taper wire-cut geometries. Also we determine unmanned wire EDM patterns fur the productivity of wire EDM industry. Developed system consists of two modules: 1) Variable taper wire EDM module guarantees the length ratio machining function, the parametric ratio machining function and the marking function. 2) Unmanned wire EDM module guarantees the automatic wire EDM during the night. The proposed system has been tested in the fields and found to be a useful system.

• Solar Energy
• /
• v.18 no.4
• /
• pp.39-47
• /
• 1998

The natural convection heat transfer in a vertical plate with discrete heat sources was studied experimentally. The particular interest was the thermal interaction of the heat sources. In this study, the radiative and conductive heat transfer were considered as heat loss, Thus, the net convective heat transfer rate was presented as adiabatic temperature and thermal wake function. As a results, for non-uniform heating condition, heat input ratio(q1/q2) was most dominant parameter for the thermal wake function. The convective heat transfer rate is decreased with the increasing of channel ratio. For the range of $7.50{\times}10^5<Rac<8.66{\times}10^6$, a useful correlation was proposed as a function of channel Rayleigh number.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.920-927
• /
• 1998

The purpose of this study was to investigate the correlation between serum component and immune function in Korean female college students according to the body mass index. There were significant increased in weight, body fat, LBM, TBW, WHR in subjects as their BMI increase(p<0.001). It was found obese group had higher levels of serum components such as total cholesterol, LDL-cholesterol and Cu levels than those of the normal group. There was a significant positive correlation between HDL-cholesterol level and NK cell number(p<0.01), between A/G ratio and T lympocytes number(p<0.05), between Cu levels and B lympocytes(p<0.01) in normal group. There was a significant positive correlation between TG level and CD4/8 ratio(p<0.001), between and IgG(p<0.001) in obese group.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.10
• /
• pp.702-709
• /
• 2008

In this paper, the optimal thermal storage time of an air-conditioning system with slab thermal storage in office building was analyzed on the basis of the gradient method algorithm. The sum of room temperature deviation and heat extraction rate was set to the criterion function. It was calculated that four hours is the optimal thermal storage time under the standard evaluation criterion. Furthermore, some case studies were executed by controlling ratio of weight functions of room temperature deviation and heat extraction rate in criterion function. It is possible to design many kinds of optimal operation of an air-conditioning system with slab thermal storage by controlling ratio of the weight functions in criterion function.

• Smart Structures and Systems
• /
• v.23 no.1
• /
• pp.71-79
• /
• 2019

In general, it may be advantageous to measure the pressure pulsation near a valve to detect a valve defect in a linear compressor. However, the acceleration signals are more advantageous for rapid classification in a mass-production line. This paper deals with the performance improvement of fault classification using only the compressor-shell acceleration signal based on the relation between the refrigerant pressure pulsation and the shell acceleration of the compressor. A transfer function was estimated experimentally to take into account the signal noise ratio between the pressure pulsation of the refrigerant in the suction pipe and the shell acceleration. The shell acceleration signal of the compressor was modified using this transfer function to improve the defect classification performance. The defect classification of the modified signal was evaluated in the acceleration signal in the frequency domain using Fisher's discriminant ratio (FDR). The defect classification method was validated by experimental data. By using the method presented, the classification of valve defects can be performed rapidly and efficiently during mass production.

• Journal of ILASS-Korea
• /
• v.26 no.4
• /
• pp.182-188
• /
• 2021

In this paper, using a transfer function-based analytical model, major factors influencing the acoustics and combustion instability in a two-stage duct system composed of a nozzle and a combustor were derived and their quantitative effects were evaluated. From the acoustic analysis, it was confirmed that the change in reflection coefficient and mean flow could have a great influence on the instability growth rate, and the area ratio and speed of sound ratio between the nozzle and the combustor are also key parameters to determine combustion instability as well as flame transfer functions.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.1 s.19
• /
• pp.101-107
• /
• 2006

While a Study with regard to the measurement on Concrete Strength and the Change of Drying Shrinkage in accordace with Content Ratio of Crushed Stone Powder, it is being analyzed as the result that the strength according to Content Ratio of crushed Stone Powder is somewhat lowering. Accordingly, it is the real situation that the Concrete mixed with Crushed Stone Powder is utilized for non-structural material, not for the structural material. Therefore, this Research willing to furnish the suitable utilizing scheme for construction site as well as practical life by means of conduct the experiment on both Concrete Pressure Strength according to mixture with Crushed Stone Powder and Elastic Modulus, it also presumes the optimum Elastic Modulus Equation after analysis of comparison with common concrete strength. As the result of the experiment, in case of the Content Ratio of Crushed Stone Powder is less than 5%, it did not display a big difference in its both strength and matter-property compare with common concrete. In case of Elastic Modulus, when the Pressure Strength is 50% and 40% respectively, the Elastic Modulus Equation accords very well with the provided condition of Quadratic function, and as the result of the Presumption on Elastic Modulus according to Content of Crushed Stone Powder, in case the Pressure Strength is 50%, Elastic Modulus Equation showed that Error Ratio of Cubic function is at degree of 0.0005%, in case the Pressure Strength is 40%, Elastic Modulus Equation was accorded well with the value of the experimental data likely as the Error Ratio of Cubic function is at the degree around 0.0034%, respectively.

• Journal of Community Nutrition
• /
• v.4 no.3
• /
• pp.187-194
• /
• 2002

This study was investigated the effects of exercise and supplementation of L-carnitine and antioxidants on hepatic mitochondrial function, especially oxidative phosphorylation (OXPHOS). Isolated hepatic mitochondria from 4 rat groups were functionally tested by an analysis of respiration and the coupling of this process to ATP synthesis in the presence of ADP. Four groups were non-trained, non-supplemented group (NTNS), non-trained, supplemented group (NTS), long term-trained, non-supplemented group (LTNS) , and long term-trained, supplemented group (LTS). The trained rats run on a treadmill (grade 10°,20 m/min) for 60min/day for 8 weeks. The supplemented rats were treated with L-carnitine (0.5% diet), vitamin E(0.5mg/g BW), vitamin C (0.5mg/g BW) and melatonin (1 $\mu$ g/g BW) for 8 weeks. There were exercise effects on improving mitochondrial OXPHOS. Within non-supplemented groups, exercised rats resulted in a significant decrease in state 4 oxygen consumption, which increased the respiratory control (RC) ratio and ADP : O (P/O) ratio. There were supplementation effects on improving mitochondrial OXPHOS, too. Within non-exercised rats, supplemented rats resulted in a significant decrease in state 4 oxygon consumption. which increased the RC ratio and P/O ratio. There were additive effects of exercise and supplementation on OXPHOS. Within supplemented rats, exercise resulted in an increase in RC ratio. Significant effects of exercise-supplement interaction on improving OXPHOS were identified. It suggests that exercise and supplementation of L-carnitine and antioxidants might improve more efficiently the impaired OXPHOS efficiency in mitochondrial dysfunction that recognized as is an important cause of degenerative diseases. (J Community Nutrition 4(3) : 187∼194, 2002)

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.5
• /
• pp.528-534
• /
• 2003

The 2-D hydraulic experimental results for the submerged rubble-mound structure, we have been concerned with the slability/function characteristics of the structures by the effects of wave force, scour/deposition at the toe and the wave transmission ratio at the lee-side sea. So, to investigate the variation characteristics of the wave transmission ratio which depended on a geometrical structure of the submerged breakwater profiles, the critical conditions for the depth of submergence and crest width were obviously presented. In summary, the results lead us to the conclusion that the wave control capabilities of submerged breakwaters by the variation of the submergence depth is higher than about 4 times the degree at the efficiency than the that of crest width. The destruction of the covering block at the crest generated at the region which was located between the maximum and minimum damage curve, and it's maximum damage/failure station from the toe of the structure was $0.2\;L_s.$ As the wave transmission coefficient and the slope of the structure increase, the damage/failure ratio and the maximum scour depth at the toe was extended, respectively. When the maximum scour depth happened, the destruction of the covering block which was located at the toe generated at the front of the submerged rubble-mound breakwater. Finally, it was found from the results that the optimization of the structure may be obtained by the efficient decision of the submergence depth and crest width in the permissible range of the wave transmission ratio.

• Journal of Mechanical Science and Technology
• /
• v.16 no.7
• /
• pp.959-965
• /
• 2002

Effective hydraulic conductivity of a statistically anisotropic heterogeneous medium is obtained for steady two-dimensional flows employing stochastic analysis. Flow equations are solved up to second order and the effective conductivity is obtained in a semi-analytic form depending only on the spatial correlation function and the anisotropy ratio of the hydraulic conductivity field, hence becoming a true intrinsic property independent of the flow field. Results are obtained using a statistically anisotropic Gaussian correlation function where the anisotropy is defined as the ratio of integral scales normal and parallel to the mean flow direction. Second order results indicate that the effective conductivity of an anisotropic medium is greater than that of an isotropic one when the anisotropy ratio is less than one and vice versa. It is also found that the effective conductivity has upper and lower bounds of the arithmetic and the harmonic mean conductivities.