• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.2
• /
• pp.119-132
• /
• 1990

To design protection coordination for an electric power distribution system, an expert system is developed, using both the veteran expert's heuristics and the guide book for the distribution facility operation considering feeder configuration, service route, load characteristics fault current and load current. The expert system developed in this papaer determines the type of protective device(clearing current and sequence). The location and rating change of protective device in the old feeder is realized by using old database. Current(T-C) curves of various kinds of protective devices are stored in Knowledge Base (KB). The expert system is developed on a 32 bit personal computer using PROLOG, AutoCAD,dBASEIIIPLUS and FORTRAN. To compute the fault current and loadflow, FORTRAN is used.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.899-905
• /
• 1999

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issure in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because of the poorness of basic data and insufficiency of the existing research. Especially, in order to establish the sound insulation plan about pilling works noise with high sound pressure level and impactive, a real situation of sound characteristics about the noise of pilling works in foundation work demands more detail investigation. In this point, this study attempts to survey the characteristics of attenuation and propagation of construction equipment noise in pilling work using SIP(soil-cement injected precast pile) method with casing. And this study intends to get the basic data for establishment of a standard about construction noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1280-1284
• /
• 2006

This paper describes the methodology for environmental assessments of traffic noise sources. An attempt is made to establish evaluation scale relationships between noise quality Parameters and subjective degrees annoyance. Subjective experimental was conducted to determine the subjective degrees annoyance that scaling score compare with reference and varieties noise source about modified traffic noises with $40{\sim}85dB$. Also a correlation analysis between noise rating index and satisfactory percentage of the noise dose response curves varied with response was conducted. As a result of study, subjective annoyance degree has not correlation of proportional linearity to the A weight noise level, but has correlation of proportional linearity to the index composed to loudness and tonality. It is suggested to be resonable level 4.9 (equivalence about 53dB) index on the out door noise limits for traffic noise and to be 6 step scale base on the linearity for evaluation traffic noise.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1242-1246
• /
• 2004

본 연구에서는 유속계와 봉부자를 동한 측정값의 불확실성를 검토한 후, 한강의 7개 지류의 실측 자료들의 불확실성을 ISO 규정을 통하여 추정하였다. Simulated Annealing 기법과 황금비 분할법을 이용한 비선형회귀식을 적용하여 기존의 수위-유량 곡선식자 비교해보았다. 불확실성 추정결과 유량 측정치들의 불확실성이 ISO 규정의 기준에 비해 높게 추정되었으며, 특히 무작위 오차와 계통 오차 중에 무작위 오차의 불착실성이 높게 나타났다. 또한, 기존 수위-유량곡선식과 Simulated Annealing 기법과 황금비 분할법을 이용한 방법을 비교해본 결과 황금비 분할법이 가장 좋은 결과를 얻었다. 이때 수위-유량곡선식의 영수위값을 황금비 분할법을 이용해 구한 후 비교해 본 결과는 기존의 선형회귀방법과 비선형방법에서 큰 차이를 보이지 않았다. 또한 곡선 분리시에는 하나의 수위-유량곡선일때보다 오차가 줄어드는 경향을 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1814-1818
• /
• 2007

본 연구는 낙동강 본류 5개 유량 측정 지점에 대한 유량측정성과 검토와 더불어 개발된 수위-유량 관계 곡선식에 대한 검증 평가를 위해 객관적인 비교 분석항목을 이용하여 적절성을 평가 하였다. 이번 개발된 수위-유량관계곡선식을 이용하여 곡선식 불확실도 및 평수시, 홍수시 상하류 유량비교와 연간 유출률을 산정하였다. 그 결과, 낙동강 수계 본류의 주요 5개 대상 지점에 대해 신뢰성 있는 수위-유량관계곡선식을 개발할 수 있었다. 개발된 곡선식을 이용하여 확정된 유량자료는 양질의 수준을 갖는 것으로 평가되었다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.5
• /
• pp.113-121
• /
• 2012

The study was carried out to investigate the dimension of irrigation canal, and measure the water flow of those diverted from Kimje main canal in Dongjin irrigation area. The rating curves indicating the relationships between water level and discharge of the lateral canals were induced using the measured data with high regression coefficients of 0.957~0.999 at inlet points and 0.932~0.998 at end points, respectively. And Manning's roughness coefficients were estimated as the ranged from 0.015 to 0.074 at inlet points and 0.056 to 0.089 at end points with rectangular type of concrete open irrigation canals, the Manning's roughness coefficients of the end points were less than those values of the end points, which may be considered as the deposition of the bottom sediments.

• Journal of Korea Water Resources Association
• /
• v.42 no.9
• /
• pp.737-745
• /
• 2009

Field measured sediment yield from an experimental urbanized basin was compared with the predicted sediment yields with RUSLE (Revised Universal Soil Loss Equation), and MUSLE (Modified Universal Soil Loss Equation). The experimental basin is 3.1km2 in area and fifty six percent of the total area had been urbanized. The hydrological data have been measured with T/M at the outlet of the experimental basin. Runoff from the basin and rainfall depth of the basin were measured every minute. Bed load and suspended load were also measured for a given flow rate. Runoff rating curves and sediment rating curve were developed for the last three years. RUSLE showed scattered prediction results but the average of the prediction values was close to the measured one. Meanwhile, MUSLE showed linear correlation between the measured sediment yield and predicted one with high correlation coefficient. But MUSLE predicts high values than the real one. Therefore, adjustment is necessary to apply MUSLE in estimation of sediment yield from the experimental urbanized basin.

• The Korean Journal of Applied Statistics
• /
• v.34 no.2
• /
• pp.225-238
• /
• 2021

The ROC, TOC, and TROC curves, which are visually descriptive methods of exploring the performance of the binary classification model, are implemented with TP, TN, FP, FN which consist of the confusion matrix, as well as their ratios TPR, TNR, FPR, FNR. In this study, we consider two types odds and then propose an odds curve representing these odds. And show the relationship between the odds curve and ROC curve. Based on the odds curve, we propose not only two statistics that measure the discriminant power of the odds curve but also the criteria for validation ratings of the odds curve. According to the shape of the odds curves, two classification distributions can be estimated and a criterion for validation ratings can be determined. The odds curve can be meaningfully used like other visual methods, and two kinds of measures for the discriminant power can be also applied together as an alternative criterion.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.155-158
• /
• 2000

The purpose of this paper is to explain the making procedure and the usage of receiver operating characteristic (ROC) curve for interpretation of radiographic images. The conventional radiograms obtained after the creation of the lesions in the acrylic plates and were enhanced in color. The observer were informed of which tooth to examine, the 'a priori' probability of a lesion present and the approximate diameter of the lesions. The two groups of films were interpreted separately by the same observer using the same rating scale. The following rating scale was used: A; definitely no lesion, B; probably no lesion, C; not sure, D; probably a lesion, and E; definitely a lesion. In analysis, for each observer the diagnostic results in terms of true positive (TP) and false positive (FP) decisions were plotted on a graph. The lowest point on the graph represents the TP and FP when only decisions designated as E according to the rating scale are included. The next point shows the TP and FP values when diagnoses designated as D are added and so forth. By connecting such plot points, a receiver operating characteristic (ROC) curves is obtained. The area under the curve represents the diagnostic accuracy resulting from a diagnostic performance at pure chance level and a value of 1.0 at perfect performance. This method has been known as an useful method to detect the minute difference for each radiographic technic, each observer and for the different lesion depths.

• Journal of The Korean Association For Science Education
• /
• v.30 no.2
• /
• pp.275-290
• /
• 2010

In this study, reliabilities of holistic scoring method and analytic scoring method were analyzed in performance assessments of middle school students' science investigation activity. Reliabilities of 2, 3, and 4~7-level rubric ratings for analytic scoring methods were compared to figure out optimized numbers of rubric ratings. Two trained raters rated four activity sheets of 60 students by two rating methods and three kinds of rubric ratings. Internal consistency reliabilities of holistic scoring methods were higher than those of analytic scoring methods, while intrarater reliabilities of analytic scoring were higher than those of holistic scoring methods. Internal consistency reliabilities and intra-rater reliabilities of 3-level rubric rating showed similar patterns of 4~7-level rubric ratings. But students' discriminations, item difficulties and item-response curves showed that the 3-level rubric ratings was reliable. These results suggest that holistic scoring method could be adapted to increase internal consistency reliabilities with improvement in intra-rater reliabilities by rater's conferences. Also, the 3-level rubric rating would be enough for good reliability in case of adapting analytic scoring methods.