• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.719-726
• /
• 2015

For a decade, solution-processed functional materials and various printing technologies have attracted increasingly the significant interest in realizing low-cost flexible electronics. In this study, Cu nanoparticles are synthesized via the chemical reduction of Cu ions under inert atmosphere. To prevent interparticle agglomeration and surface oxidation, oleic acid is incorporated as a surface capping molecule and hydrazine is used as a reducing agent. To endow water-compatibility, the surface of synthesized Cu nanoparticles is modified by a mixture of carboxyl-terminated anionic polyelectrolyte and polyoxylethylene oleylamine ether. For reducing the surface tension and the evaporation rate of aqueous Cu nanoparticle inks, the solvent composition of Cu nanoparticle ink is designed as DI water:2-methoxy ethanol:glycerol:ethylene glycol = 50:20:5:25 wt%. The effects of poly(styrene-co-maleic acid) as an adhesion promoter(AP) on rheology of aqueous Cu nanoparticle inks and adhesion of Cu pattern printed on polyimid films are investigated. The 40 wt% aqueous Cu nanoparticle inks with 0.5 wt% of Poly(styrene-co-maleic acid) show the "Newtonian flow" and has a low viscosity under $10mPa{\cdots}S$, which is applicable to inkjet printing. The Cu patterns with a linewidth of $50{\sim}60{\mu}m$ are successfully fabricated. With the addition of Poly(styrene-co-maleic acid), the adhesion of printed Cu patterns on polyimid films is superior to those of patterns prepared from Poly(styrene-co-maleic acid)-free inks. The resistivities of Cu films are measured to be $10{\sim}15{\mu}{\Omega}{\cdot}cm$ at annealing temperature of $300^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.293-301
• /
• 2011

The material of the dental prosthesis was required bio-compatibility for biological, chemical, and physical stabilities. This study was conducted the stability evaluation of mechanical, biological characteristics through comparing Co-Cr alloy(SC group), Ti alloy(ST group) made by the selective laser melting method with Co-Cr alloy(CC group), Ni-Cr alloy(CN group) made by the casting method. Modulus of elasticity for mechanical characteristic evaluation was measured by the tensile test. And we conducted the release material analysis using lactic acid-NaCl solution for the evaluation of biological stability and were observed cytotoxicity through the content of this release medium. Taking these results into account, the Co-Cr alloy made by the selective laser melting method was observed modulus of elasticity higher than he Co-Cr alloy made by the casting method. And the Co-Cr alloy made by the selective laser melting method had more superior biological stability than the other groups as the result of cytotoxicity evaluation through the release material analysis. By this results, we think that alloys made by the selective laser melting method can be applied as materials for making the dental prosthesis.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.135-142
• /
• 2011

Purpose: Deficiencies of the abdominal wall can be the a result of infection, surgery, trauma, or primary herniation. For abdominal wall reconstruction, synthetic materials have been shown to provide a better long-term success rate than primary fascial repair. But, synthetic materials cannot elicit angiogenesis or produce growth factor and are therefore plagued by an inability to clear infection. As a result of the inherent drawbacks of synthetic, significant effort has been spent on the identification of new bioprosthetic materials. The aim of our study is to evaluate the effectiveness of a synthetic material (PROCEED$^{(R)}$) and an ADM ($SureDerm^{TM}$) to repair abdominal wall defects in a rabbit models. Methods: We measured the tensile strength of the $SureDerm^{TM}$ and PROCEED$^{(R)}$ by a Tension meter (Instron 4482). 16 Rabbit models were assigned to this study for abdominal wall reconstruction. Abdominal defect of 8 rabbits were reconstructed by PROCEED$^{(R)}$ and the rest were reconstructed by $SureDerm^{TM}$. We assessed gross and histologic examinations for the reconstructed abdominal wall. Results: The tensile strength of $SureDerm^{TM}$ and Gore Tex$^{(R)}$ is $14.64{\pm}0.51Mpa$, $8.54{\pm}0.45Mpa$. PROCEED$^{(R)}$ was estimated above the limits of measurement. Inflammatory reaction of PROCEED$^{(R)}$ persisted for 32weeks, but $SureDerm^{TM}$ decreased after 16weeks. Vascular ingrowth into the $SureDerm^{TM}$ was seen after 32 weeks. The basement membrane of $SureDerm^{TM}$ changed into a form of pseudoperitoneum. In PROCEED$^{(R)}$, it seemed like pseudoepithelial lining was made from the fibrosis around the mesh. Conclusion: In our study, the $SureDerm^{TM}$ not only have less inflammatory reaction and presented more angiogenesis than the PROCEED$^{(R)}$, but also have pseudoperitoneum formation. It is expected that $SureDerm^{TM}$ is useful for abdominal wall reconstruction. However, a long-term study of its usage consequences are thought to be needed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.11-17
• /
• 2015

The increase of international and domestic trade according to global industrialization and economic growth has raised the national logistic cost in connection with physical distribution of articles. In order to reduce these costs and rise up national industrial competitiveness, Korea has also tried to improve the efficiency of logistics with various methods as advanced countries did. Especially, Korea government has decided standard dimension of pallets with T11 ($1100{\times}1100mm$) on the basis of unit load system in early 2000s, and certification program for logistics equipments has been operated to keep up the compatibility for the equipments and packaging with modulation of T11. Consequently, this certification program has contributed to extend standardization for logistics and to grow up 3 party logistics, but compared with advanced countries, the rate of national logistics cost to GDP (gross domestic product) still shows about 3% gap as demands for certification have been decreased in the recent. In this study, therefore, we proposed the development of logistics certification system based on social needs as a policy device to activate logistic industry as well as improve the efficiency of national logistics after we had analyzed all of certification programs for logistics being run in Korea. Namely, the first is the development of certification project for Northeast Asia's logistics corresponding to necessity for applying returnable transport system according to increasing the amount of trade between Northeast Asia's countries. The second is the development of certification project for safe transportation of packaging corresponding to costumer's needs for safe transit according to the growth of electronic commerce and the increase of global distribution.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.1
• /
• pp.1-11
• /
• 2018

In this study, pro-oxidant($d2w^{(R)}$) and rPP/ZnO nanocomposite flexible films for food packaging were prepared, and their mechanical and antimicrobial properties were investigated. As a result, the carbonyl index and hydroxyl index increased with exposured time to heat and UV rays. Surface analysis showed that the addition of zinc oxide improved the dispersibility and compatibility of the polymer, so that the surface of the composite film was smooth and the zinc oxide particles were smaller than the compared film. And it kept the physical properties by heat and UV ray blocking effect, and it worked to reduce decomposition. In the antimicrobial activity test, the microbial reduction rate was 3 logs or more at the use concentration of zinc oxide. The tensile strength was increased and the elongation was decreased. Oxidative degradability of multi-layered film in UV exposured for 72 hours, the molecular weight of the film decreased by 75.6%, 1,294 g/mol Mn and 5,920 g/mol Mw. In the safety analysis of food packaging materials, we obtained that are in standard of polypropylene, a food contact material of domestic law.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.173-176
• /
• 2016

This research was performed to breed new columnar-typed apple variety for pollinator in apple orchard. We cross-fertilized 'Hongro' that was an ovary parent and 'Maypole' a pollen parent in 2003. We gathered seeds in 2003 and sowed after breaking of dormancy in 2004. Seedlings was been growth and development till flowering. After fruit setting, We investigated characteristics of growth and fruit including mating compatibility from 2010 to 2012, then finally selected '03-2-95' named 'Tinkerbell' in 2012, registered as new variety on Korea Seed & Variety Service in 2015. The full bloom stage of 'Tinkerbell' was later 2 days then of 'Maypole'. Tree habit of 'Tinkerbell' was alike to of 'Maypole', for example weak tree vigor, columnar type. But there were many different characteristics between 'Tinkerbell' and 'Maypole'. Fruit shape of 'Tinkerbell' was ovoid whereas of 'Maypole' was ellipsoid. Fruit of 'Tinkerbell' was bigger, smoother skin, no waxy bloom than of 'Maypole'. Fruit of 'Tinkerbell' was more delicious than of 'Maypole' because of having higher soluble sugar content and lower titratable acidity. 'Tinkerbell' was excellent pollinator in apple orchard. Because of having high fruit setting rate with major apple varieties and a narrow tree width that was advantageous as pollinator in apple high density system.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.487-494
• /
• 2010

Cooked pork can be easily contaminated with Staphylococcus aureus during carriage and serving after cooking. This study was performed to develop growth prediction models of S. aureus to assure the safety of cooked pork. The Baranyi and Gompertz primary predictive models were compared. These growth models for S. aureus in cooked pork were developed at storage temperatures of 5, 15, and $25^{\circ}C$. The specific growth rate (SGR) and lag time (LT) values were calculated. The Baranyi model, which displayed a $R^2$ of 0.98 and root mean square error (RMSE) of 0.27, was more compatible than the Gompertz model, which displayed 0.84 in both $R^2$ and RMSE. The Baranyi model was used to develop a response surface secondary model to indicate changes of LT and SGR values according to storage temperature. The compatibility of the developed model was confirmed by calculating $R^2$, $B_f$, $A_f$, and RMSE values as statistic parameters. At 5, 15 and $25^{\circ}C$, $R^2$ was 0.88, 0.99 and 0.99; RMSE was 0.11, 0.24 and 0.10; $B_f$ was 1.12, 1.02 and 1.03; and $A_f$ was 1.17, 1.03 and 1.03, respectively. The developed predictive growth model is suitable to predict the growth of S. aureus in cooked pork, and so has potential in the microbial risk assessment as an input value or model.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.193-200
• /
• 2010

Current rose cultivars are all composed of heterozygous genome due to long history of out crossing including interspecific hybridization. It has been adapted by artificial selection and crossing by breeders that mainly based on the crossing with fertile pollen derived from inter- or intra-specific hybridization. Pollen viability and germination ability tests provide valuable information for the designing of parentage for more successful breeding efficacy. In this study, we tested the pollen viability and germination ability in seven rose cultivars to find any relationship among several factors including pollen size, ploidy levels, and crossing compatibility. The pollen viability showed wide ranges from 39% 'Pinocchio' as minimum to 82% 'Scarlet Mimi' as maximum, whereas pollen germination rate were from 1% 'Mini Rosa' to 41% 'Scarlet Mimi' as a highest. Pollen size ranged from 41.3 to $45.4{\mu}m$ in large sized pollen and 30.7 to $37.4{\mu}m$ in small sized pollen. The mean diameter of large sized pollen is approximately 10-40% bigger than that of small sized pollen. There are positive relationships among ploidy level, total chromosome length, and pollen size. Crossing list showed that seed setting ratio and seed germination were related to pollen viability, pollen germination, and ploidy level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.415-424
• /
• 2019

In this paper, a minimum rotation radius was designed and fabricated to overcome the threshold so that elderly or disabled people who have difficulty moving can move and transfer safely and conveniently in a narrow room. In the indoor environment, where the sedentary culture develops, this study aimed to provide convenience for passengers with fracture diseases, geriatric diseases, and other knee and waist diseases. First, links, seats, armrests, covers, motors, batteries, chargers, controllers, etc. were attached to the frame so that they could be moved and lifted indoors. The product design and structure were designed considering the user's environment and physical characteristics, and IoT functions were added. A driving experiment was performed to confirm the operating performance of the manufactured indoor moving and lifting wheelchair. The performance tests, such as continuous running time, turning radius, maximum actuator load, maximum lift height, sound pressure level, minimum sensing distance of the driving aid sensor, interworking of server and app programs, device compatibility, and duty cycle error rate, were performed. As a result of the test, the built-in wheelchair could achieve the performance test target of each item and operate successfully.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2021

ε-Ga2O3, a metastable phase of Ga2O3, has excellent compatibility with substrates having a hexagonal structure or a quasi-hexagonal structure, so that a film having a relatively lower surface roughness and defect density than β-Ga2O3 can be obtained easily. Accordingly, we attempted to fabricate a high-quality β-Ga2O3 film with a low surface roughness and defect density using the property of phase transition to β-Ga2O3 when ε-Ga2O3 is annealed at a high temperature. For this, the growth of high-quality ε-Ga2O3 films must be preceded. In this study, the optimal flow rate was investigated by analyzing the structural and morphological characteristics of the ε-Ga2O3 film according to the supplied precursor ratio. In addition, the annealing condition and the effect of β-Ga2O3 mixed in the ε-Ga2O3 film on the crystallinity of β-Ga2O3 after phase transition were also investigated.