• 제목/요약/키워드: Rate-capability

검색결과 1,196건 처리시간 0.025초

부호화 정보에 기반한 라이브 비디오의 전송률 결정 (Transmission Rate Decision of Live Video Based on Coding Information)

  • 이명진
    • 한국멀티미디어학회논문지
    • /
    • 제8권9호
    • /
    • pp.1216-1226
    • /
    • 2005
  • 본 논문에서는 동적 대역 할당이 가능한 네트워크에서 라이브 비디오의 고화질 전송을 위한 예방형 전송률 결정 방식을 제안한다. 부호기 앞단의 화면 분석기에서 입력 화면의 분산과 장면전환 정도로부터 향후 화면의 비트율을 예측하고, 부호기와 복호기 버퍼의 제약조건에 의한 전송률 범위를 구한다. 이를 토대로 빈번한 전송률 재협상에 따른 비용 증가 문제를 해결하기 위해 최근 재협상 시점으로부터 경과 시간, 비디오 수신 품질 등을 고려한 예방형 전송률 결정 방식을 제안한다. 모의실험을 통해 제안 방식은 정규화된 Least Mean Square 기반 전송률 결정 방식과 비교되었고, 적은 재협상 비용으로도 지연 위반 화면 없이 높은 채널 이용률 달성이 가능함을 보였다.

  • PDF

$NF_3/CH_4$ 플라즈마를 이용한 실리콘 카바이드 식각공정의 신경망 모델링 (Modeling of silicon carbide etching in a $NF_3/CH_4$ plasma using neural network)

  • 김병환;이석룡;이병택;권광호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
    • /
    • pp.58-62
    • /
    • 2003
  • Silicon carbide (SiC) was etched in a $NF_3/CH_4$ inductively coupled plasma. The etch process was modeled by using a neural network called generalized regression neural network (GRNN). For modeling, the process was characterized by a $2^4$ full factorial experiment with one center point. To test model appropriateness, additional test data of 16 experiments were conducted. Particularly, the GRNN predictive capability was drastically improved by a genetic algorithm (GA). This was demonstrated by an improvement of more than 80% compared to a conventionally obtained model. Predicted model behaviors were highly consistent with actual measurements. From the optimized model, several plots were generated to examine etch rate variation under various plasma conditions. Unlike the typical behavior, the etch rate variation was quite different depending on the bias power Under lower bias powers, the source power effect was strongly dependent on induced dc bias. The etch rate was strongly correated to the do bias induced by the gas ratio. Particularly, the etch rate variation with the bias power at different gas ratio seemed to be limited by the etchant supply.

  • PDF

멀티스펙트랄 이미지 센서를 이용한 전자 지도 기반 변량 질소 살포 (Map-based Variable Rate Application of Nitrogen Using a Multi-Spectral Image Sensor)

  • 노현권
    • Journal of Biosystems Engineering
    • /
    • 제35권2호
    • /
    • pp.132-137
    • /
    • 2010
  • Site-specific N application for corn is one of the precision crop management. To implement the site-specific N application, various nitrogen stress sensing methods, including aerial image, tissue analysis, soil sampling analysis, and SPAD meter readings, have been used. Use of side-dressing, an efficient nitrogen application method than a uniform application in either late fall or early spring, relies mainly on the capability of nitrogen deficiency detection. This paper presents map-based variable rate nitrogen application based using a multi-spectral corn nitrogen deficiency(CND) sensor. This sensor assess the nitrogen stress by means of the estimated SPAD reading calculated from the corn leave reflectance. The estimated SPAD value from the CND sensor system and location information form DGPS of each field block was combined into the field map using a ArcView program. Then this map was converted into a raster file for a map-based variable rate application software. The relative SPAD (RSPAD = SPAD over reference SPAD) was investigated 2 weeks after the treatments. The results showed that the map-based variable rate application system was feasible.

High-frame-rate Video Denoising for Ultra-low Illumination

  • Tan, Xin;Liu, Yu;Zhang, Zheng;Zhang, Maojun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제8권11호
    • /
    • pp.4170-4188
    • /
    • 2014
  • In this study, we present a denoising algorithm for high-frame-rate videos in an ultra-low illumination environment on the basis of Kalman filtering model and a new motion segmentation scheme. The Kalman filter removes temporal noise from signals by propagating error covariance statistics. Regarded as the process noise for imaging, motion is important in Kalman filtering. We propose a new motion estimation scheme that is suitable for serious noise. This scheme employs the small motion vector characteristic of high-frame-rate videos. Small changing patches are intentionally neglected because distinguishing details from large-scale noise is difficult and unimportant. Finally, a spatial bilateral filter is used to improve denoising capability in the motion area. Experiments are performed on videos with both synthetic and real noises. Results show that the proposed algorithm outperforms other state-of-the-art methods in both peak signal-to-noise ratio objective evaluation and visual quality.

터보코드와 BCH코드의 연쇄부호화를 이용한 무선 ATM셀 전송의 성능 분석 (Performance of Wireless ATM Cell Transmission with Concatenated Turbo and BCH Coding)

  • 문병현;권광영
    • 한국산업정보학회논문지
    • /
    • 제7권2호
    • /
    • pp.1-5
    • /
    • 2002
  • 본 논문에서는 무선 ATM환경에서 ATM 셀을 전송할 때 터보부호와 BCH 부호를 이용한 연쇄 부호를 제안하여 비트 오류확률, 셀 손실 확률을 분석하였다. 사용된 연쇄부호는 부호율이 1/2인 터보부호와 오류정정 능력이 5비트와 15비트를 갖는 BCH부호를 이용하였다. 연쇄부호를 사용할 경우 터보코드를 사용 할 때와 비교하여 비트 오류확률이 0.001에서 0.2㏈ 와 0.4㏈ 비트 오류확률 성능향상을 보였다. 또한 셀 손실률이 0.01에서 연쇄부호를 사용할 경우 터보코더를 사용할 때 보다는 0.1㏈ 및 0.2㏈ 개선됨을 보였다.

  • PDF

유도 결합 플라즈마 스퍼터 승화법을 이용한 고속증착 시스템 (High Rate Deposition System by Inductively Coupled Plasma Assisted Sputter-sublimation)

  • 최지성;주정훈
    • 한국표면공학회지
    • /
    • 제45권2호
    • /
    • pp.75-80
    • /
    • 2012
  • A sputter-sublimation source was tested for high rate deposition of protective coating of PEMFC(polymer electrolyte membrane fuel cell) with high electrical conductivity and anti-corrosion capability by DC biasing of a metal rod immersed in inductively coupled plasma. A SUS(stainless steel) tube, rod were tested for low thermal conductivity materials and copper for high thermal conductivity ones. At 10 mTorr of Ar ICP(inductively coupled plasma) with 2.4 MHz, 300 W, the surface temperature of a SUS rod reached to $1,289^{\circ}C$ with a dc bias of 150 W (-706 V, 0.21 A) in 2 mins. For 10 min of sputter-sublimation, 0.1 gr of SUS rod was sputter-sublimated which is a good evidence of a high rate deposition source. ICP is used for sputter-sublimation of a target material, for substrate pre-treatment, film quality improvement by high energy particle bombardment and reactive deposition.

T-method를 이용한 고층 아파트 욕실 배기 시스템의 층별 유량분배 해석 (Analysis of Air Flow Rate Distribution for the Bathroom Exhaust System in High-rise Buildings Using T-method)

  • 문종선;강석윤;이승철;유호선;이재헌
    • 설비공학논문집
    • /
    • 제16권3호
    • /
    • pp.265-272
    • /
    • 2004
  • Based on the T-method, a new scheme for predicting air flow rate distribution in a bathroom exhaust system is developed. Introduction of individual duct route enables us to disintegrate a complicated multi-fan ductwork into a set of simultaneous single-fan subsystems. The scheme is validated via the analysis of a well-posed test problem, showing physical consistency. In order to demonstrate the utility and capability of our method, the bathroom ventilation system in a 20-story residential building is selected as an example. Under the typical design condition, the air flow rate of each exhaust fan at the balancing point is successfully predicted, and such information can lead to an engineering estimation for the overall system performance. While some deficiencies in ventilation are found at bathrooms at lower floors with 6mmAq-rated exhaust fans, they disappear over the whole building by using fans of enhanced static pressures, 7 and 8mmAq. Finally the present scheme seems to be useful for practical design of multi-branched, multi-fan ventilation systems.

Evaluating Conversion Rate from Advertising in Social Media using Big Data Clustering

  • Alyoubi, Khaled H.;Alotaibi, Fahd S.
    • International Journal of Computer Science & Network Security
    • /
    • 제21권7호
    • /
    • pp.305-316
    • /
    • 2021
  • The objective is to recognize the better opportunities from targeted reveal advertising, to show a banner ad to the consumer of online who is most expected to obtain a preferred action like signing up for a newsletter or buying a product. Discovering the most excellent commercial impression, it means the chance to exhibit an advertisement to a consumer needs the capability to calculate the probability that the consumer who perceives the advertisement on the users browser will acquire an accomplishment, that is the consumer will convert. On the other hand, conversion possibility assessment is a demanding process since there is tremendous data growth across different information dimensions and the adaptation event occurs infrequently. Retailers and manufacturers extensively employ the retail services from internet as part of a multichannel distribution and promotion strategy. The rate at which web site visitors transfer to consumers is low for online retail, out coming in high customer acquisition expenses. Approximately 96 percent of web site users concluded exclusive of no shopper purchase[1].This category of conversion rate is collected from the advertising of social media sites and pages that dataset must be estimating and assessing with the concept of big data clustering, which is used to group the particular age group of people along with their behavior. This makes to identify the proper consumer of the production which leads to improve the profitability of the concern.

Strengthening Food Security through Food Quality Improvement - Focus on Grain Quality and Self-Sufficiency Rate

  • Meera Kweon
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.10-10
    • /
    • 2022
  • The concern about food security is rising as the unstable situation of food supply and demand due to the Covid-19 pandemic, climate change, and turbulent political situation. Korea's global food security index (GFSI), analyzed by the Economist Group, is considered good, but the level continuously decreases in comparing food security levels by country. In particular, Korea is highly dependent on food imports, and food and grain self-sufficiency rates continuously decrease. Therefore, increasing those rates to strengthen food security is urgent. Among the major grains, the self-sufficiency of wheat, com, and soybeans, except rice, is relatively low. Unlike the decrease in the annual rice consumption, the annual wheat consumption has been continuously maintained or increased, which is required public-private efforts to increase the self-sufficiency rate of wheat. Applying the government's policies implemented to increase the self-sufficiency rate of rice in the past will help increase the self-sufficiency rate of wheat. In other words, expanding wheat production and infrastructure, stabilizing supply and demand, and establishing a distribution system can be applied. However, the processing capability of wheat and rice is different, which is necessary to improve wheat quality and processing technology to produce consumer-preferred wheat-based products. The wheat and flour quality can be improved through breeding, cultivation, post-harvest management, and milling. In addition, research on formulation, processes, packaging, and storage to improve the quality of wheat-based products should be done continuously. Overall, food security could be strengthened by expanding wheat production and consumption, improving wheat quality, and increasing wheat self-sufficiency.

  • PDF

실업자의 재취업에 관한 분석: 인적자본관점(Human Capital Perspective)과 인간능력관점(Human Capability Perspective)의 적용 (An Analysis on the Reemployment of the Unemployed : Centered on the Applications of Human Capital and Human Capability Perspective)

  • 강철희;이홍직;홍현미라
    • 한국사회복지학
    • /
    • 제57권3호
    • /
    • pp.223-249
    • /
    • 2005
  • 1990년대 후반 경제위기를 경험하며, 우리나라에서 실업의 문제에 대한 사회적 관심과 더불어 실업자의 재취업 가능성에 대한 연구가 지속되고 있다. 재취업과 관련된 기존의 연구들은 인적자본이론을 토대로 연구를 진행해 왔는데, 본 연구는 기존의 연구와는 다르게 Sen에 의해 제시된 인간능력관점을 기초로 하면서 이러한 요인의 실업자 재취업에의 영향력을 인적자본론 요인과 비교론적 차원에서 분석을 시도해 보았다. 아울러, 본 연구는 인간능력관점에서 논하는 사회적 능력 요인 중 핵심적 요인으로 간주되는 성별 차이라는 요인에 주목하면서 성별에 따라 인적자본요인과 인간능력요인이 재취업에 어떠한 영향을 주는가를 비교 검토하였다. 본 연구는 한국노동패널 5차년도 자료 중 연구목적에 적합한 1,871사례를 대상으로 선정하여 재취업의 위험도를 콕스회귀분석을 통해 분석하였다. 분석 결과, 학력, 기술수준 적합도, 근속기간 등의 인적자본이론 요인들은 기대와는 다르게 재취업의 가능성에 부적인 영향을 갖는 것으로 나타난 반면, 기초교육능력, 의료보험가입과 사회보험수혜 및 수도권거주여부 등의 인간능력요인들은 기대한 바에 일치하며 재취업에 정적인 영향을 주는 것으로 나타났다. 성별에 따른 분석결과를 보면, 성별에 따라 각 요인들이 상이하게 재취업에 영향을 주는데 그러한 경향성이 인간능력요인에서 더욱 부각되는 것으로 나타났다. 본 연구의 결과는 재취업에 있어서 인적자본관점에서 제시되는 요인들에 대한 고려도 중요하지만, 동시에 인간능력관점에서 강조하는 사회 제도적 요인이 역시 매우 중요한 역할을 할 수 있음을 시사해 준다. 그리고 성별에 따른 비교연구 결과는 재취업 현상에 대해서 인간능력관점과 더불어 성분절적 노동시장구조에 대한 관점과 함께 이에 대해서 다양한 접근이 필요함을 시사해 준다. 본 연구는 기존 연구에서 실증적으로는 주로 국가단위에서 분석되었던 인간능력관점을 개인단위차원에서 분석하면서 재취업에의 영향력을 다각적인 시각에서 검증하여 인간능력개발과 관련된 사회복지적 개입의 의미를 제고시킨다는 점에서 연구의 의의를 갖는다.

  • PDF