• Fire Science and Engineering
• /
• v.22 no.3
• /
• pp.252-257
• /
• 2008

With the rapid exuberant growth of the forest, the number and size of forest fires and the costs of wildland fires have increased. The flame spread rate of forest fires is depending on the environmental variables like the wind velocity, moisture of grassland, etc. If we know the effects of the environmental variables on the fire growth, it is useful for wildland fiIre suppression. But analysis of the spread rate of wildland fire for these effects have not been established. In this study, the effects of wind velocity and height of grassland fuel have been investigated using the WFDS which is developed at NIST for prediction of the spread of wildland fires. The results showed that the relation between the height of the fuel and the spread rate of the head fires is, and the spread rates related to the wind velocity are predicted 17% less than the experimental results of Australia. When the wind velocity is over 7.5m/s, the concentration of pyrolyzed gas phase fuel is getting low due to fast movement of pyrolyzed gas, the flame spread rate becomes slow.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.11a
• /
• pp.81-109
• /
• 2007

The loan rate of the government loan program offered by the Small Business Corporation(SBC) can be determined as a sum of three factors such as a reference interest rate, a policy aim spread, and a credit risk spread. However the loan rate has been lower than the loan rate in the banking sector. The profit has continually run in the red figures and hence the stability the fund managed by the SBC has been damaged. Even though a policy aim spread could be emphasized, the stability and profitability of the fund should be prioritized. This means that the loan rate of the SBC should be determined such that the loss might not be occurred. This requires the policy aim spread to change from relatively large negative to near zero.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.23-28
• /
• 2011

This paper describes design and implementation of a spread spectrum clock generator(SSCG). The proposed architecture generates the spread spectrum clock controlling a input voltage signal for VCDL(Voltage Controlled Delay Line). Spread charge pump is controlled by the SSC modulation logic block provides a control signal to VCDL through LPF in DLL. By using this architecture, chip area and power consumption can be reduced because it is not necessary additional circuit to control modulation rate. This circuit has been designed and fabricated using the UMC 0.25um CMOS technology. The chip occupies an area of 290${\times}$120um^2.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.603-608
• /
• 2010

A study has been conducted experimentally to investigate behavior of ignition and flame spread over metal dust deposits with particle size using by a developed apparatus and thermogravimetric analysis(TGA). Zr, Ta and Mg-Al(90:10 wt%) alloy metal powders including Mg and Ti with different particle size were used. Also we used PMMA(Polymethylmethacrylate) powder to compare the combustion properties to those of metal powders. When dust layers were more than 5 mm in thickness, the dependency of deposit depth on flame spread rate over dust layer was not shown. With decreasing mean particle diameter, flame spread rate over Ti dust layer decreased, while the spread rate over Mg dust layer increased. For mean diameter of $51{\mu}m$, fire spread rate over pure Mg dust layer decreased to about 50 percent in Mg-Al(90:10 wt%) dust layer. The oxide thickness of metal dust used in this study tended to be inversely proportional with the spread rate, and it was quite small for influence with particle size. From the results of TGA for Ti and Mg, weight increasing curves(550 for Mg, 578 for Ta) were observed in the oxidation process, and they seems to be caused by ignition of upper dust layer.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.63-69
• /
• 2008

The characteristics of the spread of a forest fire are generally related to the attributes of combustibles, geographical features, and meteorological conditions, such as wind conditions. The most common methodology used to create a prediction model for the spread of forest fires, based on the numerical analysis of the development stages of a forest fire, is an analysis of heat energy transmission by the stage of heat transmission. When a forest fire breaks out, the analysis of the transmission velocity of heat energy is quantifiable by the spread velocity of flame movement through a physical and chemical analysis at every stage of the fire development from flame production and heat transmission to its termination. In this study, the formula used for the 1-D surface forest fire behavior prediction model, derived from a numerical analysis of the surface flame spread rate of solid combustibles, is introduced. The formula for the 1-D surface forest fire behavior prediction model is the estimated equation of the flame spread velocity, depending on the condition of wind velocity on the ground. Experimental and theoretical equations on flame duration, flame height, flame temperature, ignition temperature of surface fuels, etc., has been applied to the device of this formula. As a result of a comparison between the ROS(rate of spread) from this formula and ROSs from various equations of other models or experimental values, a trend suggesting an increasing curved line of the exponent function under 3m/s or less wind velocity condition was identified. As a result of a comparison between experimental values and numerically analyzed values for fallen pine tree leaves, the flame spread velocity reveals a prediction of an approximately 10% upward tendency under wind velocity conditions of 1 to 2m/s, and of an approximately 20% downward tendency under those of 3m/s.

• Journal of the Korean Society of Combustion
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2017

An experimental study on spreading flame over electrical wire, which was insulated by Polyethylene(PE) and had different diameters, was conducted with applied AC electric field. The result showed that the flame spread rate decreased in increase of the diameter of insulator at a fixed electric field. The flame spread rate exhibited increase or decrease tendency with applied AC electric field, having three distinct regimes depending on applied voltage and frequency. In each regime, the flame spread rate was characterized by physical parameters of applied electric fields and wire dimensions, and the behaviors could be explained by a thermal balance mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1124-1131
• /
• 2014

The chirp spread spectrum (CSS) technique that transmits data signal by using a chirp signal is often used for maritime wireless communication systems such as sound detection radar systems for submarines. However, maritime multipath environment could reduce the data rate of the CSS system. To tackle the problem, an overlap-based CSS transmission scheme is proposed and analyzed in this paper: Based on the approximated Gaussian Q function, we derive a closed form expression of the bit error rate (BER) of the proposed overlap-based CSS system and investigate the mathematical relationship between the number of overlaps and the intersymbol interference (ISI).

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• Journal of Korea Trade
• /
• v.26 no.2
• /
• pp.21-44
• /
• 2022

Purpose - This study quantifies sources of trade balance dynamics over the business cycle in Korea. Specifically, we quantify the relative importance of domestic and foreign factors on trade balance dynamics using a small open economy real business cycle (SOE-RBC) model and provide policy implications for stabilization policies. Aggregate productivity and interest rate spreads are considered domestic factors affecting the trade balance. A world interest rate (the U.S. interest rate) is considered a foreign factor. Design/methodology - Following Neumeyer and Perri (2005), we build the SOE-RBC model with three types of shocks: aggregate productivity, interest rate spread, and world interest shocks. The model is estimated by the generalized method of moments (GMM) using relevant business cycle statistics. The estimated model is used for quantifying the relative importance of domestic and foreign factors on trade balance dynamics in Korea. Findings - Our main findings can be summarized as follows: 85.64% of the trade balance fluctuations in Korea are explained by domestic factors, the remaining 14.35% by foreign factors. Particularly, trade balance dynamics are mostly accounted for by the change in aggregate productivity shocks (85.58%). World interest rate shocks considerably explain trade balance (14.35%), whereas the role of interest rate spread shocks that represent domestic risks is limited (0.08%). Although aggregate productivity is key in explaining trade balance dynamics in Korea, interest rates still have an essential role. This is because aggregate productivity changes induce interest rate spread variations and, thus, the trade balance significantly. The results suggest that government policies mitigating fluctuations in aggregate productivity would be effective for stabilization policies in Korea by reducing the trade balance volatility. Originality/value - Existing studies on the emerging market business cycle examine mostly Latin American countries, and the main object of the studies is the volatility of consumption rather than trade balance dynamics. Conversely, our study examines Korea rather than Latin American countries. Additionally, we examine sources of trade balance dynamics, which are relatively more important in Korea, rather than those of the volatility of consumption. Hence, we estimate the model to explicitly match moments related to trade balance in the data.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.49-57
• /
• 2007

This Study is to suggest a method of effect evaluation of forest fire on governor station in shrub land. Theoretically, to evaluate effects of forest fire, it is combined that Spread Rate of Forest Fire, Flame Model, and Thermal Radiation Effects Model; i.e. a travel time of forest fire is calculated by Spread Rate of Forest Fire, fire-line intensity is calculated by Flame Model, and effects of fire-line intensity is affected by Thermal Radiation Effects Model. With the aforementioned method, we could carry out the effect evaluation of forest fire on governor station in shrub land and could distinguish scenarios to need protection plan from all scenarios.