• 한국안전학회지
• /
• 제13권3호
• /
• pp.102-111
• /
• 1998

This study was concerned with the development of a heavy duty rust-converting agent, the function of which is to form metal complex coatings, containing vinyl halide-acrylic terpolymer emulsion, defoamer, emulsifying agent, glass flakes, chelating agent such as gallotannic acid, gallic acid, and pyrogallic acid, and other additives. The resulted emulsion products(Sample No.1~No.5) were characterized through test either in the forms of emulsions, which include Viscosity, Penetration rate, Acidity and Film drying rate test, or in the forms of coated layer on rusty steel substrates by FT-IR, which include hardness, gloss, salt spray, adhesion and flame retardant test. The test results are as follows ; Penetration rate(0.1~0.4 mm/min), Solid content(70%), Acidity (pH 1.8~2.0), Specific gravity(1.30~1.35), Film drying rate(108min, RH 40% ; 150min, RH 80%), Gloss(83~92, incident angle $60^{\circ}$; 88~97, incident angle $85^{\circ}$), Pencil hardness(4H~5H), Adhesion (100/100), Salt spray test(>720Hr), LOI(%) value(38%), Vertical burning test(UL 94-v-l). According to the various performance of specimens show above, the evaluation of the availability of this heavy duty rust-converting agent can be concluded that all the samples(No.1~No.5) are capable of being used in the field of chemical plant and in the hazard areas of fire and explosion potential. It was observed that the properties of sample No.2, especially gloss and hardness, were much better than that of the other samples.

• Clinical and Experimental Reproductive Medicine
• /
• 제19권1호
• /
• pp.57-64
• /
• 1992

The present study was undertaken to clarify the role of TEST-Yolk Buffer(TYB) as a factor for the improvement of human sperm fertility potential. We examined the effects of low temperature capacitation using TYB on sperm motility (%), motility pattern, normal morphology, true acrosome reaction, sperm penetration assay and human in vitro fertilization. Comparing the TYB method and swim-up method, the sperm motility(%) of selected sperm was not significantly different, but statistically significant differences were found in curvilinear velocity, linearity, lateral head displacement, normal morphology(%) and true acrosome reaction(%)(p<0.05). Results obtained from the sperm penetration assay demonstrated that the penetration index and penetration rate were increased significantly(p<0.05) when the spermatozoa were incubated in TYB, as compared with swim-up method. And fertilization of intact human oocytes was more succesful when spermatozoa were pretreated with TYB at $4^{\circ}C$ for 48 hours as compared with swim-up method. Our results show that TYB method have advantages in terms of enhancement of sperm hyperactivation, increased true acrosome reaction, increased ability to penetrate zona-free hamster ova and augmented fertilization of human oocytes, suggesting that TYB is superior in its ability to preserve sperm motility and fertilizing ability.

• 한국식품과학회지
• /
• 제22권4호
• /
• pp.492-495
• /
• 1990

소금용액(15%, w/v)에서 깍두기용 무우 cube를 간절임하는 동안 무우 cube중의 ${\alpha}-amylase$ 활성도와 ascorbic acid 함량의 변화, 포도당액과 고추즙액의 침투에 대한 영향 및 생균수에 미치는 영향을 조사하였다. Ascorbic acid 함량은 1시간 동안 약 24%(w/v)가 감소되었고, 반면 ${\alpha}-amylase$ 활성도는 시간이 경과됨에 따라 다소 증가하는 경향을 보였다. 또한 간절임은 무우 cube 조직내로의 glucose와 고추 중액과 같은 양념류의 침투를 촉진하는 효과가 있었다. 그리고 무우 cube 중의 세균과 효모 및 곰팡이 수는 간절임 중 감소되었는데 간절임 1시간 이내에 주로 감소하는 경향을 나타냈다.

• Corrosion Science and Technology
• /
• 제5권4호
• /
• pp.129-136
• /
• 2006

High temperature corrosion behavior of AISI-type 316L stainless steel for the MCFC(molten carbonate fuel cell) bipolar application was studied by immersion test and penetration attack method in anode environment ($650^{\circ}C$, $Li_2CO_3/K_2CO_3=62/38$ mol%, $H_2/CO_2=80/20$ vol%) without or with different $CaCO_3$ content. Not only immersion test method but also morphological observation of samples in the carbonate melts are adopted as experimental methods. With aid of the morphological observation of cross section of samples immersed in a carbonate melt was possible to obtain penetration attack. The concentration effect of $CaCO_3$ inhibitor was investigated in order to verify the optimum concentration for practical application in MCFC stack operation. The corrosion rate in the presence of $CaCO_3$ was proven to be decreased as a function of $CaCO_3$ concentration. The corrosion rate in the presence of $CaCO_3$ was measured with a value of 6.9 mpy which is 2.4 times lower than that of inhibitor-free electrolyte. The cross section microscopy revealed that the internal penetration by oxidation in molten carbonate is very severe. In this case, the attack was occurred not only dissolution loss in the electrolyte by corrosion reaction but also weight gain through oxide layer by internal penetration.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.8-22
• /
• 1995

Three dimensional numerical study of non-evaporating and evaporating spray characteristics was performed in a quiescent and motoring condition of direct injection diesel engine. The calculation parameter was breakup model. The breakup models used were Reitz & Diwakar model and TAB model. The modified k-${\varepsilon}$ turbulence model considering the compressibility effect due to the compression and expansion of piston was used. The calculation results of the spray tip penetration and tip velocity using the TAB model showed similar trends comparing with the experimental data. Although the evaporation rate was not nearly affected with the breakup model at the higher injection pressure, in the low injection case, the evaporation rate result using the TAB model became higher than that of R&D model. The evaporation rate was increased with the injection pressure due to the vigorous interaction with the gas field.

• 한국분무공학회지
• /
• 제25권4호
• /
• pp.145-153
• /
• 2020

The purpose of this study is to compare the injection and spray characteristics of single-hole GDI injectors using injection rate and mie-scattering spray images. Five types of single-hole injectors with different nozzle hole diameters were used, and the spray rate, spray tip penetration, spray area, and spray width were analyzed. As a result, the diameter of the nozzle hole had a direct effect on the injection and spray characteristics. It was confirmed that the larger the diameter of the nozzle hole, the higher the injection quantity, the spray tip penetration, the spray area, and the spray width. In addition, it was confirmed that the near-field spray, which has little influence of ambient air, has a great correlation with the injection rate.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1009-1015
• /
• 2013

Ultra-short laser pulses are effective, when high requirements concerning accuracy, surface roughness and heat affected zone are demanded for surface structuring. In particular, picosecond laser systems that are suited to be operated in industrial environments are of great interest for many practical applications. This paper focused on inducing optimum process parameters for higher volume ablation rate by analyzing a relationship between crater diameter and optical spot size. In detail, the dependency of the volume ablation rate, penetration depth and threshold fluence on the pulse duration 8 ps and wavelength of 515 nm was discussed. The experimental results showed that wavelength of 515 nm resulted in less threshold fluence ($0.075J/cm^2$) on copper than IR wavelength ($0.3J/cm^2$). As a result, it was possible that optimum fluence for higher volume ablation rate was achieved with $0.28J/cm^2$.

• 한국초지조사료학회지
• /
• 제38권4호
• /
• pp.320-324
• /
• 2018

본 연구는 티모시 건초와 농후 사료 위주의 사료를 급여한 한우 씨수소 정소상체 정자 체외수정 효율 조사를 통해 정자의 활용 가능성을 조사하였다. 농후 사료는 체중의 1.8%를 급여하고 양질의 티모시 건초를 자유채식 시킨 14개월령 거세우의 정소에서 분리된 정소상체 미부의 정자를 회수하고 동결 흉해 후 체외수정을 실시한 결과는 다음과 같다. 웅성전핵과 자성전핵이 형성(2PN)된 난자는 정상수정으로, 1개의 전핵(1PN), Expanded Sperm Head (ESH), Polyspermy 형태는 비정상적인 수정의 형태로 평가하였다. 정상적으로 수정된 난자의 비율은 정소상체 정자의 경우 전체 침투율은 49.7% 그리고 정상적인 2PN을 가진 난자는 18.5%를 보였으며, 대조구 정자의 전체 침투율은 54.4%로서 정소상체 정자 보다 높은 결과를 보였으나 유의적인 차이를 보이지는 않았다. 정상적으로 2PN을 형성한 비율은 36.7%로서 정소상체 정자를 이용한 정자 보다 높았으나 유의적인 차이는 없었다. 체외수정 후 발달률 조사에서 정소상체 정자의 분할률은 81.2%, 대조구 정자는 82.7%로 유사한 결과를 보였으나, 배반포 발달률은 정소상체 정자 24.4%와 대조구 정자 12.2%로 정소상체 정자를 사용한 난자의 발달에서는 유의적으로 높았다(p<0.05).

• 대한토목학회논문집
• /
• 제26권6C호
• /
• pp.377-384
• /
• 2006

다짐된 모래-벤토나이트 혼합토의 인장강도 측정을 위한 새로운 시험방법을 개발하기 위하여 일축관입(UP)시험에 대한 이론적 실험적 측면에서의 연구를 실시하였다. 다짐된 혼합토의 인장강도는 완전소성이론을 이용한 한계해석으로부터 계산될 수 있으며 개량일축관입시험기(Improved Unconfined Penetration, IUP)는 기존의 일축관입시험기와 비교하여 시험기기의 개선을 통해 측정 오류를 감소시켰다. 선행 시험 결과 원반의 크기와 재하속도의 증가와 pH가 높아(산성)짐에 따라 인장강도가 증가함을 알 수 있었다. 또한 원반 직경이 25.4mm이며 재하속도가 0.5%/min~1%/min일 경우가 개량일축관입시험에 가장 적합하다는 것을 알 수 있었다. 할렬인장시험 결과와의 비교를 통해 개량일축관입시험법의 신뢰성도 확인하였다.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.9-21
• /
• 2000

In this study, the characteristics of high-pressure swirl injector have been studied using a commercial CFD code, STAR-CD and experiment to investigate the effect of the length of orifice and swirl port on the spray characteristics. Influences of swirl port angle and initial conditions have also been examined in terms of penetration depth and Sauter`s mean diameter. Computed results of the spray characteristics are compared with experimental results. The results show that the tangential velocity at the nozzle exit decreases, but the axial velocity increases as swirl port angle is increased. Hence, the static flow rate increases, but the initial spray angle decreases with increasing the swirl port angle. It is also shown that the values of the initial SMD used as input data for spray simulation influences the penetration depth and SMD. The spray pattern from the present numerical simulation agrees well with experimental result.