• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.270-275
• /
• 2008

Crack growth characteristics of elastomeric materials are an important factor determining the strength and durability. In this study, the fatigue crack growth characteristic of filled EPDM compounds with different reinforcing fillers, such as silica and carbon black, was investigated using a newly designed tester. Frequency and test temperature had significant effects on the fatigue crack growth. The crack growth rate decreased with increasing frequency and the rate increased with increasing temperature. A power law relationship between the tearing energy and crack growth was observed for filled EPDM compounds. The crack growth rate reduced with increasing filler contents. Silica filled EPDM showed a better fatigue resistance than carbon black filled EPDM. The crack growth rate of silica filled EPDM decreased up to 30 phr and increased again at 50 phr. The formation of microductile type pits was observed on the fatigue-failure surface of unfilled EPDM, and relatively coarse surface with randomly distributed tear lines was observed on the failure surface of silica filled EPDM.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.355-361
• /
• 1987

Creep and fatigue tests were carried out on crack growth properties of small surface cracks in 304 stainless steel at 538.deg.C, 593.deg. C and 650.deg. C in air, by using small plate specimens with a small artificial pit. All the data of the crack growth rate per hour obtained in the present tests were correlated with the maximum stress intensity factor, so that the applicability of linear fracture mechanics to the crack growth of surface cracks at elevated temperature was investigated. In the creep test, relatiion of .sigma.$\^$n/.t$\_$f/=C is obtained between failure time and nominal stress at each temperature level, where n has the value of 11-14 depending on the temperature level. In the creep and fatigue crack growth properties of surface cracks at the elevated temperatures, the maximum stress intensity factor, $_{4}$$\_$max/, is some extent applicable parameter to describe the surface crack growth rate under the present experimental conditions. The crack growth rate per hour increases when the holding time decreases, and creep crack growth rate per hour becomes the lowest limit of crack growth rate per hour in this tests.

• Journal of Environmental Science International
• /
• v.26 no.5
• /
• pp.585-590
• /
• 2017

The Diameter at Breast Height (DBH) provides information about the volume growth of a tree. In this study, we estimated the relative growth rates of Castanea crenata and Pinus rigida as 4.07% and 3.73%, respectively. Although the difference was low, we demonstrated that the growth rate of C. crenata is slightly faster than that of P. rigida. After calculating the relative growth rate for each section, we found that the relative growth of C. crenata decreased with time. However, the relative growth rate of P. rigida showed an overall increase. The gap widths of both species showed an increasing trend. However, the gradient of the two species was different. The gradient of C. crenata was approximately 12.0, but that of P. rigida was approximately 4.7. This means that the volume growth of C. crenata was faster than that of P. rigida during 4 years. However, this was relatively a short period for measuring the volume growth pattern, and we believe that additional useful information can be obtained by conducting long-term ecological monitoring. Results of canonical correspondence analysis showed that among the climate variables, temperature was significantly related to the gap widths for both species.

• Food Science and Biotechnology
• /
• v.15 no.5
• /
• pp.773-777
• /
• 2006

Growth of Bacillus cereus was assessed during the storage of seasoned soybean sprouts at 0,5, 10, and $15^{\circ}C$. No lag time in its growth curve was observed and thus the specific growth rate of B. cereus in the exponential growth phase was estimated for bootstrapped microbial count data. The distribution of the specific growth rate could be explained by the BetaGeneral distribution function, and temperature dependence was described by the Ratkowsky square root model. The temperature dependence of the growth could be successfully incorporated into the differential equation of microbial growth to predict the B. cereus count on the seasoned soybean sprouts under fluctuating temperature conditions. Safe shelf lives with different probabilities to reach $10^5\;CFU/g$ were presented at four different temperatures, considering the variation in initial contamination and specific growth rate by the Monte Carlo method and 2-step bootstrapping, respectively. Safe shelf lives defined as the time with a probability of less than 0.1% of reaching the critical limit, were 13.4, 5.2, 3.6, and 2.8 days at 0, 5, 10, and $15^{\circ}C$, respectively.

• Ocean and Polar Research
• /
• v.44 no.2
• /
• pp.127-137
• /
• 2022

This study examined the growth pattern and environmental factors affecting the growth of the halophyte, Suaeda japonica, which is prevalent on tidal flats in the west coast of Korea in order to calculate annual carbon production. Quantitative sampling was conducted every month for three years from 2018 to 2020 on salt marshes located on the southern coast of Ganghwa Island. In terms of annual density affected by the germination rate at first period, especially when air temperature for winter time was constantly below 0℃ for long periods of time, germination decreased and precipitation in summer also exerted an influence. In terms of annual growth with regard to length, the part below the ground grew rapidly in the beginning after budding, while the part above ground grew at a relatively steady rate at all times. With regard to biomass, the part below the ground also increased from April in a manner similar to length growth, but decreased drastically from September with leaves falling off and water loss occurring. The part above ground showed a rapid increase from the beginning of the rainy season. Size-frequency distribution revealed broader patterns after the rainy season as individual growth varied, but from September, it stopped at all year. High growth rates were recorded in the initial phase of growth after budding and growth was rapid, but growth declined in summer when biomass increased. The annual mean production based on growth rate was calculated at 352 gDWt/m²/yr, and the highest production was 519 gDWt/m²/yr in 2018, but it has decreased since 2019. Annual carbon production was at calculated 143.41 gC/m²/yr for Suaeda japonica in the vicinity of the southern coast of Ganghwa Island.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.1
• /
• pp.29-37
• /
• 2002

This study was conducted to compare ozone sensitivity among Betula sp. by measuring visible foliar injuries and growth responses. Four Betula sp.(B. costata, B. davurica, B. platyphylla var.japonica and B. ermani) grown in the greenhouse, were transplanted in the plastic pots. One-year-old seedlings of four Betula sp. exposed to relatively high ozone concentration(100 ppb) for 8 h day$^{-1}$ for 5 weeks in fumigation chamber. We measured visible injuries, leaf numbers and leaf areas at the end of experiments, and growth effects were evaluated by measuring the relative growth rate(RGR) of height and diameter and the dry weights of leaf, stem and root once a week. Four Betula species showed the significant differences for growth responses by the ozone treatment. Growths of three species, except for B. ermani, were significantly reduced by the $O_3$ exposure. B. costata with leaf senescence at the early growing stage and B. davurica indicated highest visible foliar injury rate may be the sensitive species at the 100 ppb ozone concentration. Although the growth rate of B. ermani was reduced by 100 ppb ozone exposure at the early growing stage, B. ermani may be a tolerance species that recover the growth rate with the adaptation for the high ozone concentration.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.21-26
• /
• 2001

This study was performed to define the physicochemical characteristics of food waste and food wastewater, and to find the effect of salinity variation experiment, the samples of 1, 2, 3 and 4 were prepared by the salinity of 1.0%, 1.5%, 2.0% and 2.5%, respectively. In experiment, aerobic composting reactors were operated by the model which was composed of half an hour's stirring and 2 hour's aeration per day, for 45 days. Seeds of vegetables of Chinese cabbage and red pepper were seeded at compost-free control, compost 1, 2, 3 and compost 4 for the sake of investigation of germination rate and growth rate of those. The followings are the conclusions that were derived from this study. 1. In food waste, the moisture content was 60%, organic compound content was 95%, total carbon was 47.5%, total nitrogen was 1.6%(therefore, C/N ratio was 30). The values of pH were 4.0 and 3.8 the values of salinity were 0.9% and 1.2%, and the values of conductivity were 7.8 mS/cm and 18.0 mS/cm, respectively. 2. In salinity experiment, the reduction rate of volume was increased(40%) when the salinity was decreased(1.0%). Also, the reduction rate of mass was increased(52%) when the salinity was decreased(1.0%). This fact denotes that salinity hinders the process of composting. 3. Germination rate and growth rate of Chinese cabbage are more excellent than those of red pepper(97.14%, 5.2:2.5 cm). 4. In Chinese cabbage, germination rate and growth rate at compost with the lowest salinity are more excellent than those at compost-free control(97:94%, 5.2:4.5 cm).

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2006.11b
• /
• pp.371-396
• /
• 2006

To see the implication of trade policy in endogeneous growth model, we introduce trade protection that takes the form of an import tariff and represents one plus the rate of protection provided to industry sector. We showed that considering goodness of fit of regression model, we can see that the empirical evidence is strongly in favor of the character of trade policies as the instrument spurring economic growth. As for import tariff, we see that 1% increase in the rate of tariff that protect domestic market causes the rate of growth to increase by 0.87%. An import tariff to final product significantly spurs product development and faster growth come as a result. But, we should note that the effects of trade policy are muted by the induced changes in the output of intermediates in an economy that is relatively unproductive in the research lab.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.1-1
• /
• 1992

YIG(Yttrium Iron Garnet) single crystals were grown by FZ(Floating Zone) method. Since YIG melts incongruently, TSFZ(Traveling Solvent Floating Zone) method which was modified FZ was applied to grow YIG single crystals. The optimum growth condition were growth rate Imm/hr, counter-rotation 30rpm and oxidized atmosphere was necessary to sintering and growth process. The quality of grown crystals depended on the degree of sintering. The voids were generated by the reaction of Fe ions with oxygen and the density of voids was increased with the growth rate increased. When the growth rate was more than 1.5mm/hr, the cellular growth occured and the density of dislocation was increased at the periphery of crystals. Also, secondary phases of orthoferrite(YFe$O_3$)compost ion were observed in the grown crystal.

• Journal of Plant Biology
• /
• v.8 no.1_2
• /
• pp.5-10
• /
• 1965

The effect of radioactive sulfur-35 on the growth and tissue respiration in rye, Secale cereale L., seedlings were studied in this investigation. The growth and respiration rate of the materials treated with the different intensities of radioactivity, represented by the different concentration(${\mu}c$) of radioactive sulfur were shown similar effects in treated groups as those of Gamma-ray or X-ray irradiation on plant materials. However, in the groups of ($0.1{\mu}c$ and ($0.4{\mu}c$ S35-solution, the growth and respiration rate were stimulated somewhat more clearly than in case of control. And the higher concentration groups, $1.6{\mu}c$, $6.4{\mu}c$, and $25.6{\mu}c$ were depressed of the growth and tissue respiration rate. The present data could be explained on the basis that the higher concentration treatments with the radioactive isotope did produce injury to the plant metabolism generally, but the moderate treatment would stimulate to the plant growth and tissue respiration.