• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.75-87
• /
• 2003

Printing inks are mainly composed of pigment and vehicles. Among these components, the Vehicle affect the rheologic property of the ink the most but pigment content of characteristic also after to the fluidity property not less than the vehicle. In the study, It is tested effect to the ink fluidity and structure recovery according to change the pigment particle size. The ink fluidity have been observed by using rheometer at the various conditions and it has been tested to observe what the ink fluidity has different means. In result We have found that the viscosity value of the low shear rate range has relatively higher value with decreasing the pigment particle size in the ink. Also, it has been found that when the pigment particle size decreases, the yield stress gradually increase. In the case of ink's structure recovery, when the pigment particle size decreases in the ink, the less changing shear rate, and it takes less time to recover.

• 대한토목학회논문집
• /
• 제29권4D호
• /
• pp.451-457
• /
• 2009

본 연구에서는 주차이용실태조사 자료를 사용하여 주차장법의 공동주택 주차장 설치기준을 검증하였다. 검증결과 주차장법에서 제시한 연상면적에 따른 주차장 설치기준은 주차이용실태조사 자료와 상당히 유사하게 나타나지만 지역과 주택규모에 따른 차이는 유의미하지 않은 것으로 드러났다. 이에 반해 세대수는 연상면적보다 주차수요와 더 강한 상관관계를 보이며, 세대수에 따른 주차장 설치기준은 지역과 주택규모에 따라 그 차이가 유의미한 것으로 분석되었고 일반적인 상식과도 잘 부합한다. 분석결과에 따라 지역과 주택규모에 따른 6개 그룹별로 세대수에 따른 주차장 설치기준을 산정하였다. 각 그룹별로 세대별 주차대수 자료의 분포에 적합한 통계분포를 추정하고 추정된 분포의 평균값을 세대수에 따른 주차장 설치기준으로 제시하였다. 세대수에 따른 주차장 설치기준은 그 상대적, 절대적인 값의 크기를 쉽게 인식할 수 있는 장점이 있으며 실제 주차이용실태조사 자료와도 매우 잘 부합하는 것으로 판단된다.

• 수산경영론집
• /
• 제53권2호
• /
• pp.21-41
• /
• 2022

The effect of change in exchange rates on an economy is very important, especially, to a small open economy like South Korea. I explore whether Free Trade Agreements (FTAs) have positive influences on exchange rate-pass through import price of import market for fishery products in South Korea. Competition among FTA partners is enhanced after FTAs are effective. I expect that the extent to which are exchange rate pass-through (hereafter, ERPT) into import price of fishery products (in terms of Korea currency) would be reduced since the import market for fishery products in South Korea is an oligopolistic market. Specifically, I investigate two research questions with six South Korea's FTA partners-Norway, Thailand, Peru, U.S., China and Vietnam. First, whether the extent to which are exchange rate pass-through into import price of fishery products from six FTA partners would decrase in the post-FTA era; seconds, the size of reduction has a negative relation with the size of their market share in the import market for fishery products in South Korea if it decreases. The empirical results indicate that the degree of ERPT into import price from other FTA partners than Norway has been reduced after FTA, statistically and significantly; however, I do not find the evidence that the size of reduction is related to their market share. The findings in this study imply that FTAs have negative effects on producers' economic welfare in South Korea's fishery industry by reducing the extent to which are exchange rate pass-through as well as reducing tariff barriers.

• 한국생활과학회지
• /
• 제15권5호
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).

• 수산해양기술연구
• /
• 제58권3호
• /
• pp.193-198
• /
• 2022

In this study, for the purpose of reducing the catch of small giant octopus in a net pot, an escape experiment of octopus was performed on five types of escape rings of different sizes. As a result of the experiment, the smallest giant octopus with a weight of 406 g was found to escape from an escape ring with a diameter of 30 mm or larger, and 592 g octopus, a weight similar to the octopus of the current minimum landing weight (600 g), escaped from an escape ring with a diameter of larger than 40 mm. An individual weight with 406 g becomes 39 mm when converted from a diameter of 25 mm circular escape vent; that is, the circumference to the inner diameter of the mesh. It can be inferred that the converted mesh size of 39 mm cannot escape. Logistic regression analysis was performed using a generalized linear model (GLM) to investigate the correlation between the ratio of escape ring size/Mantle diameter (R/MD) and the escape rate. As a result, it was found that there was a significant correlation between the R/MD ratio and the escape rate and that the higher the R/MD ratio, the greater the escape rate. As a result of logistic regression analysis, the R/MD value was denoted 0.520 with the 50% escape rate. In addition, it can be estimated to be about 50 mm when converted to the mesh size. Therefore, in this study, the diameter of the escape ring and the size of the escape possible of the octopus were experimentally considered. It was found that there was a significant correlation.

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.909-917
• /
• 2021

This study was carried out experimentally on the production and properties of silicon nanopowders characteristics using a transferred type arc plasma apparatus. To investigate the properties of silicon nanopowder, the purity of argon gas(99.999%, 99.9%) and the partial pressure ratio of nitrogen gas(0~90%) were varied. The total pressure in chamber is 400Torr and the silicon chunk amount used as raw material is 300g. The power supplied to the cathode to generate arc plasma was 9~12kW/h, and the electrode was made of tungsten and graphite with a diameter of 13mm. The particle size, impurity elements and powder evaporation rate of the silicon powder were analyzed using the XRD, FE-SEM, TEM and electronic scale. According to the purity of argon gas, the silicon evaporation rate and the particle size were similar, and impurities were generated more in the case of 99.9% purity than 99.999%. When argon gas and nitrogen gas were mixed in the chamber, the silicon evaporation rate and particle size increased as the partial pressure ratio of nitrogen gas increased. In particular, when the partial pressure ratio of nitrogen gas was 80%, the silicon evaporation rate 80g/h, and the particle size was about 80~100nm.

• 한국수산과학회지
• /
• 제44권3호
• /
• pp.251-258
• /
• 2011

To investigate whether the rearing environmental factors (size heterogeneity, rearing density, and feeding frequency) affect the growth and cannibalism of fry in cultured puffer Takifugu obscurus, we conducted three experiments. To examine size effects, we used small (total length [TL] $26.0{\pm}0.5\;mm$, body weight [BW] $0.18{\pm}0.01\;g$), medium (TL $23.1{\pm}0.1\;mm$, BW $0.28{\pm}0.01\;g$), large (TL $26.0{\pm}0.2\;mm$, BW $0.48{\pm}0.01\;g$) and small-large size combination groups. For density, we used size-matched puffers (TL $25.0{\pm}0.5\;mm$, BW $0.53{\pm}0.03\;g$) and five density were examined ranging from 1.43 to 7.14 individuals/L. For the feeding frequency, we also used size-matched fry and feeding frequencies of three times/2 days, one time/day, two times/day, three times/day. We ran each experiment in triplicate and investigated the survival rate, daily food intake (DFI), feed efficiency (FE), and daily growth rate (DGR). The growth of the puffers increased with increasing size, density, and feeding frequency, while cannibalism increased with a greater size gap, density and lower feeding frequency. Therefore, we concluded that size, rearing density, and feeding frequency are major factors influencing growth and cannibalism of the puffer, T. obscurus.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.157-162
• /
• 2010

Effect of starting SiC particle size on nitridation rate and flexural strength of $Si_3N_4$-bonded-SiC (SNBSC) ceramics was investigated by using SiC particles of different size (${\sim}200\;{\mu}m$, ${\sim}100\;{\mu}m$ and ${\sim}45\;{\mu}m$). The specimen prepared from smaller SiC particles resulted in higher nitridation rate after nitridation at $1450^{\circ}C$, owing to the lower packing density in green body. The flexural strength showed maxima after 1-h nitridation for all specimens and then decreased with prolonged nitridation because of local densification-induced pore coarsening. The specimen prepared from smaller SiC particles showed better flexural strength because of smaller pore size and partly higher nitridation rate in the specimen. A maximal flexural strength of 29 MPa was obtained in the specimen with a density of $2.04\;g{\cdot}cm^3$, which was prepared from $45\;{\mu}m$-SiC particles.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.73-79
• /
• 2003

Generally, field performance of elastomeric track pad components has been poor, especially for the medium to heavy tonnage tracked vehicles, which are operated on the hilly cross-country course. The service life of these track pad, is affected not only by the terrain and environmental conditions but also by the speed, cornering, braking, weight of the vehicle, and the track tread design. In this research, modulus, tearing energy, and the rate of crack propagation of vulcanizates are evaluated by changing base materials to improve the service time of track pad. By increasing the contents of carbon black, modulus, tearing energy, and fatigue crack growth resistance of vulcanizates improved. Compared with the NR vulcanizate, the HNBR vulcanizate had a higher value of tearing energy. The rate of crack propagation of vulcanizates using smaller size carbon black was slower than that using larger size carbon black. When the HNBR was blended with the ZSC, the tearing energy of the vulcanizates was a little reduced because of the high modulus but the crack propagation rate was reduced significantly. In the relation between the crack propagation rate and the strain energy release rate, though up to 100% strain were applied to specimens, the slope on the log scale ($\beta$) varied between 1.72 and 2.3 with the kind of elastomer.