• 한국세라믹학회지
• /
• 제54권5호
• /
• pp.400-405
• /
• 2017

$P_2O_5-ZnO-SiO_2-R_2O$ glasses were synthesized as a sealing material for large scale dye-sensitized solar cells (DSSC). Compositional effects of $P_2O_5$ and ZnO were examined by varying their contents. Their viscosity and glass stability at sintering temperatures of less than $550^{\circ}C$ were examined by flow button test. Glass transition temperature and structural change upon compositional change were investigated. Chemical stability against electrolyte was also examined by immersing the glasses in the electrolyte for 72 h at $85^{\circ}C$.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.365-369
• /
• 2013

Coal ash is known to contain a noticeable amount of valuable elements, including transition metals and lanthanides. Therefore it is quite actual problem to extract them for metallurgy and other applications. This paper presents the results of high gradient magnetic and mechanical separation, microscopy, element analyses and optical spectroscopy of brown coal ash taken from the combustion camera and chimney-stalk of Angren thermal power station. The separated magnetic fraction was 3.4 wt.%, where the content of Fe in ferrospheres increased to 58 wt.%. The highest contents of Fe and rare earth elements were found in the fine fractions of $50-100{\mu}m$. Optical absorption spectroscopy of water solutions of the magnetic fractions revealed $Fe^{2+}$ and $Fe^{3+}$ ions in the ratio of ~1:1. The separated coal ash could be used for cleaning of technological liquid waste by means of the high gradient magnetic field.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.413-419
• /
• 2022

An oxyfluoride glass ceramic containing Eu²⁺-doped nepheline and LaF₃ crystals was modified, with BaF₂ replacing LaF₃ up to 20 mole percent, and its luminescence change was monitored. With increasing BaF₂ content, the greenish yellow emission centered at 540 nm under 400-nm excitation decreased, and a new afterglow emission from the modified ceramic was observed after removal of the excitation light source. X-ray diffraction (XRD) and transmission electron microscopy with energy dispersive spectroscopy (TEM-EDS) were used to investigate the changes in the crystalline phases within the glass matrix. Time dependent emission intensity was monitored to observe the afterglow, and the possible mechanism for the afterglow due to BaF₂ addition was considered.

• 한국광물학회지
• /
• 제21권3호
• /
• pp.261-269
• /
• 2008

몽골 서부 할잔-부룩테이 알칼리 복합체에서 산출되는 페그마타이트는 Nb-Y-Zr-F의 부화가 특징적인 NYF 유형의 함희유금속 페그마타이트이다. 이들 함희유금속 페그마타이트는 할잔-부룩테이 섬장암 및 알칼리 장석 화강암의 분화물로서 알칼리 화강암류에 비해 십 배 이상의 희유금속이 농집되어 있다. 할잔-부룩테이 함희유금속 페그마타이트의 경제성은 페그마타이트맥의 연장성 및 국부적 품위 변화에 의해 좌우될 것으로 생각된다.

• 한국재료학회지
• /
• 제24권4호
• /
• pp.175-179
• /
• 2014

Ti and Ti alloys have been extensively used in the medical and dental fields because of their good corrosion resistance, high strength to density ratio and especially, their low elastic modulus compared to other metallic materials. Recent trends in biomaterials research have focused on development of metallic alloys with elastic modulus similar to natural bone, however, many candidate materials also contain toxic elements that would be biologically harmful. In this study, new Ti based alloys which do not contain the toxic metallic components were developed using a theoretical method (DV-$X{\alpha}$). In addition, alloys were developed with improved mechanical properties and corrosion resistance. Ternary Ti-Ag-Zr alloys consisting of biocompatible alloying elements were produced to investigate the alloying effect on microstructure, corrosion resistance, mechanical properties and biocompatibility. The effects of various contents of Zr on the mechanical properties and biocompatibility were compared. The alloys exhibited higher strength and corrosion resistance than pure Ti, had antibacterial properties, and were not observed to be cytotoxic. Of the designed alloys' mechanical properties and biocompatibility, the Ti-3Ag-0.5Zr alloy had the best results.

• 자원리싸이클링
• /
• 제30권3호
• /
• pp.41-46
• /
• 2021

메탄술폰산은 우수한 물리화학적 특성을 지니고 있어 금속의 침출에 효과적이다. 분자구조 및 코발트와 니켈 금속의 침출자료를 이용하여 메탄술폰산과 황산의 화학적 반응성을 비교하였다. 유발과 공명효과는 두 산의 반응성에 큰 영향을 미쳤다. 동일한 침출조건에서 코발트와 니켈의 침출률은 메탄술폰산보다 황산에서 높았다. 메탄술폰산의 강한 산도와 금속염의 높은 용해도를 고려하면 메탄술폰산을 금속회수시 침출제로 이용하는 것이 가능하다.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3481-3484
• /
• 2013

• 한국입자에어로졸학회지
• /
• 제10권2호
• /
• pp.53-59
• /
• 2014

Palladium (Pd) nanoparticles attached graphene (GR) composite was synthesized for an enhanced glucose biosensor. Aerosol spray pyrolysis (ASP) was employed to synthesize the GR-Pd composite using a colloidal mixture of graphene oxide (GO) and palladium chloride ($PdCl_2$) precursor. The effects of the weight ratio of the Pd/GR on the particle properties including the morphology and crystal structure were investigated. The morphology of GR-Pd composites was generally the shape of a crumpled paper ball, and the average composite size was about $1{\mu}m$. Pd nanoparticles less than 20 nm in diameter were deposited on GR sheets and the Pd nanoparticles showed clear crystallinity. The characteristic of the glucose biosensor fabricated with the as-prepared GR-Pd composite was tested through cyclic voltammetry measurements. The biosensor exhibited a high current flow as well as clear redox peaks, which resulted in a superior ability of the catalyst in terms of an electrochemical reaction. The highest sensitivity obtained from the amperometric response of the glucose biosensor was $14.4{\mu}A/mM{\cdot}cm^2$.

• 자원리싸이클링
• /
• 제21권4호
• /
• pp.60-68
• /
• 2012

반도체 및 태양광 산업에서는 반도체 소자 및 솔라셀을 제조하기 위하여 실리콘 웨이퍼가 사용되고 있다. 실리콘 웨이퍼는 실리콘 잉곳의 절단으로부터 만들어지며 이 공정에서 실리콘 슬러지가 발생한다. 반도체 소자의 사용처가 점점 증가함에 따라 실리콘 슬러지의 발생량 또한 증가하고 있는 실정이다. 최근 경제적인 측면과 효율성에 관한 측면에서 실리콘 슬러지의 재활용 기술이 폭넓게 연구되고 있다. 본 연구에서는 실리콘 슬러지의 재활용 기술에 대한 특허와 논문을 분석하였다. 분석범위는 1982년~2011년까지의 미국, EU, 일본, 한국의 등록/공개된 특허와 SCI 논문으로 제한하였다. 특허와 논문은 키워드를 사용하여 수집하였고, 기술의 정의에 의해 필터링하였다. 특허와 논문의 동향은 연도, 국가, 기업, 기술에 따라 분석하여 나타내었다.

• 한국재료학회지
• /
• 제12권2호
• /
• pp.153-159
• /
• 2002

The co-deposited behavior was investigated under varied bath compositions and current densities from Watt Ni plating bath containing Al and A1$_2$O$_3$powders. For single-particle bath, Al and A1$_2$O$_3$particles were agglomerated. The area percentage of A1$_2$O$_3$on plating surface decreased with increasing the current density, while that of Al on plating surface increased. On the other hand, in case of double-particle bath with 1.25g/$\ell$ of Al and 5.0g/$\ell$ of A1$_2$O$_3$5g, the area percentage of Ni-Al-A1$_2$O$_3$increased with increasing current density and the surface morphology was fine without agglomeration. Intermetallic compounds such as $\gamma$'and $\gamma$+$\gamma$' phases appeared when the co-deposited film was annealed.