• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.777-783
• /
• 1994

Oxidation behavior of hot-pressed silicon nitride ceramics with various sintering additives has been investigated. The weight gain of each specimens has shown in the range of 0.11 mg/$\textrm{cm}^2$ ~3.4 mg/$\textrm{cm}^2$ at 140$0^{\circ}C$ for 192 h and eleven compositions have shown good oxidation resistance with the weight gain below 0.5 mg/$\textrm{cm}^2$. The oxidation rate has been shown to obey the parabolic rate law and the oxidized surface has consisted of $\alpha$-cristobalite and M2Si2O7 or MSiO3 (M=rare earth or transition metals) phase. The oxidation rate of each specimens has related to the eutectic temperature between additive oxide and SiO2, and ionic radius of additive oxides, respectively. From the above results, it could be concluded that the oxidation behavior of hot pressed silicon nitride is dominated by the high temperature properties of grain boundary glassy phase and the high temperature properties of grain boundary glassy phase are affected by the ionic radius of additive oxides.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.164-172
• /
• 2021

Titanium is the ninth most abundant element in the Earth's crust and is the fourth most abundant structural metal after aluminum, iron, and magnesium. It exhibits a higher specific strength than steel along with an excellent corrosion resistance, highlighting the promising potential of titanium as a structural metal. However, titanium is difficult to extract from its ore and is classified as a rare metal, despite its abundance. Therefore, the production of titanium is exceedingly low compared to that of common metals. Titanium is conventionally produced as a sponge by the Kroll process. For powder metallurgy (PM), hydrogenation-dehydrogenation (HDH) of the titanium sponge or gas atomization of the titanium bulk is required. Therefore, numerous studies have been conducted on smelting, which replaces the Kroll process and produces powder that can be used directly for PM. In this review, the Kroll process and new smelting technologies of titanium for PM, such as metallothermic, electrolytic, and hydrogen reduction of TiCl₄ and TiO₂ are discussed.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제26권1호
• /
• pp.1-14
• /
• 2023

Foreign body (FB) ingestion is a common health problem that affects children more than adults. According to gastroenterologists' guidelines, the management of FB ingestion differs slightly between adult and children. This review aimed to compile adult and children guidelines and establish an understandable association to reveal the requirements and timing of the endoscopic procedure, which is the most effective and least complicated technique for gastrointestinal FBs. Coins, pins, and chicken and fish bones have been the most commonly ingested FBs. However, with their increasing use in recent years, large batteries with lithiumion conversion, stronger magnets composed of rare earth metals, such as neodymium, and superabsorbent objects have become the most morbid and mortal, necessitating new management strategies. Although the approach to gastrointestinal FBs is controversial, with different treatment options available in different disciplines, many studies have demonstrated the efficacy and safety of endoscopic procedures. Many factors influence the timing of endoscopy, including the nature, size, and location of the ingested object and the patient's clinical condition.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1013-1021
• /
• 2024

A series of experiments were performed to produce a fuel source for a molten salt reactor (MSR) through pyroprocessing technology. A simulated LiCl-KCl-UCl₃-NdCl₃ salt system was prepared, and the U element was fully recovered using a liquid cadmium cathode (LCC) by applying a constant current. As a result, the salt was purified with an UCl₃ concentration lower than 100 ppm. Subsequently, the U/RE ingot was prepared by melting U and RE metals in Y₂O₃ crucible at 1473 K as a surrogate for RE-rich ingot product from pyroprocessing. The produced ingot was sliced and used as a working electrode in LiCl-KCl-LaCl₃ salt. Only RE elements were then anodically dissolved by applying potential at - 1.7 V versus Ag/AgCl reference electrode. The RE-removed ingot product was used to produce UCl₃ via the reaction with NH4Cl in a sealed reactor.

• 자원환경지질
• /
• 제31권4호
• /
• pp.297-310
• /
• 1998

Geochemical characteristics of environmental toxic elements at the Narim mine area were investigated on the basis of major, minor, rare earth element geochemistry and mineralogy. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in soils and sediments range from 11.57 to 22.21 and from 1.86 to 3.93, and are partly negative and positive correlation against $SiO_2/Al_2O_3$ (3.41 to 4.78), respectively. These suggested that sediment source of host granitic gneiss could be due to rocks of high grade metamorphism originated by sedimentary rocks. Characteristics of some trace and rare earth elements of V/Ni (0.33 to 1.95), Ni/Co (2.00 to 6.50), Zr/Hf (11.27 to 53.10), La/Ce (0.44 to 0.55), Th/Yb (4.07 to 7.14), La/Th (2.35 to 3.93), $La_N/Yb_N$ (6.58 to 13.67), Co/Th (0.63 to 2.68), La/Sc (3.29 to 5.94) and Sc/Th (0.49 to 1.00) are revealed a narrow range and homogeneous compositions may be explained by simple source lithology. Major elements in all samples are enriched $Al_2O_3$, MgO, $TiO_2$ and LOI, especially $Fe_2O_3$ (mean=7.36 wt.%) in sediments than the composition of host granitic gneiss. The average enrichment indices of major and rare earth elements from the mining drainage are 2.05 and 2.91 of the sediments and are 2.02 and 2.60 of the soils, normalizing by composition of host granitic gneiss, respectively. Average composition (ppm) of minor and/or environmental toxic elements in sediments and soils are Ag=14 and 1, As=199 and 14, Cd=22 and 1, Cu=215 and 42, Pb=1770 and 65, Sb=18 and 3, Zn=3333 and 170, respectively, and extremely high concentrations are found in the subsurface sediments near the ore dump. Environmental toxic elements were strongly enriched in all samples, especially As, Cd, Cu, Pb, Sb and Zn. The level of enrichment was very severe in mining drainage sediments, while it was not so great in the soils. Based on the EPA value, enrichment index of toxic elements is 8.63 of mining drainage sediments and 0.54 of soils on the mining drainage. Mineral composition of soils and sediments near the mining area were partly variable being composed of quartz, mica, feldspar, amphibole, chlorite and clay minerals. From the gravity separated mineralogy, soils and sediments are composed of some pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, goethite and various hydroxide minerals.

• 한국자기학회지
• /
• 제25권4호
• /
• pp.101-105
• /
• 2015

희토류 금속이나 4d/5d 전이금속을 포함하지 않은 3d 전이금속 Fe와 Ni 원소만을 적절하게 배열해도 강한 수직 자기이방성을 가질 수 있음을 예측한 이론 계산 결과가 최근 보고된 바 있다. 그 계산에서는 Fe 층을 표면으로 하는 계만을 고려하였는데 본 논문에서는 Ni가 표면일 때의 자기이방성 에너지를 제일원리계산 방법으로 계산하여 자기이방성을 조절할 수 있는 방안이 있을 수 있는지를 알아 보았다. Fe(001) 표면에 Ni 원소 한 층이 덮였을 때[Ni/Fe(001)]의 자성과 자기이방성을 제일원리계산 방법으로 VASP과 FLAPW 방법을 상호 보완적으로 사용하면서 계산 결과를 비교해 보았다. VASP에 의한 결과는 FLAPW 방법으로 얻은 결과와 큰 차이가 없었고, Fe와 Ni의 강한 띠 혼합으로 Fe와 Ni의 자기모멘트가 모두 증가하였으며 Ni/Fe(001)은 수평 자기이방성을 가지는 것으로 계산되었다. 원자 별 자기이방성 기여도 계산에 의하면 자기이방성에 결정적인 역할을 하는 것은 Ni표면 층임을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권1호
• /
• pp.37-46
• /
• 1985

Development of a dental Ni-Cr alloy system for porcelain veneering crown and bridge was studied in this research. The principles of alloy design were a) It should not contain toxic beryllium. b) It should have low melting Point. c) It should be easily ground and polished. d) It should possess an adequate strength to resist the deformational force In the mouth. e) It should be bondable Ivith porcelain by chemically. After investigating the effect of minor elements such as boron and rare earth metals on the mechanical properties of the Ni-Cr alloy system, the compromised ideal composition for dental use was determined. The composition was l9.6%, Cr, 5.6% Mo, 3.4% Si, 1, 0% Fe, 0.01% Ti, 0.5-1.0% B, 0.2-0.6% misch metal, balance Ni. To compare the performance of experimental alloy with commercially available alloys, the properties such as strength, melting point, and bond strength were measured. The results Ivere as follows: a) Boron increases the strength of the alloy but reduces the elongation. b) Misch metal increases the strength when the boron content is low, but does not increase the strength when boron content is high. And it reduces the elongation drastically, c) Mechanical strength of the experimental alloy was not superior to commercially available Be containing alloy, but handling performance such as castability, ease of granting and polishing, and cuttability were superior to the Be containing alloy.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.937-944
• /
• 2011

Studies have been carried out in order to reduce fuel-cladding chemical interaction (FCCI) behavior of metallic fuel in sodium-cooled fast reactors (SFR) using an electroplating technique. A $20{\mu}m$ thick Cr layer has been plated by the electrochemical method in the Sargent bath over the HT9 (12Cr-1Mo) clad material and diffusion couple tests of the U-10Zr metallic fuel as well as the rare earth alloy (70Ce-29La) have been conducted. The results show that the Cr plating can prevent FCCI behavior along the fuel-clad interface. However, cracks developed through the thickness during plating, which resulted in the migration of some fuel constituents. Variation of bath temperature, application of pulse current, and post heat treatment have been conducted to control such cracks. We found out that some conditions like the pulse current and the post heat treatment enhanced the layer property by reducing the internal cracks and improving the diffusion couple test.

• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.31-39
• /
• 2015

용매추출법에서 희토류 금속을 효과적으로 분리하기 위해 추출제만 사용하는 것이 아니라 crown ether와 같은 첨가제를 이용하는 연구를 하였다. Host-guest 화합물인 macrocyclic ligand는 금속과 착화물을 형성하는데, 이 때 crown ether의 cavity 크기와 비슷한 크기의 금속 이온들과 안정한 착화물을 형성한다. 이전 연구에서 europium과 yttrium을 분리하기 위해 여러 사슬 길이의 지방산 추출제를 이용한 추출실험을 행하였었다. 이를 토대로 분리효율이 좋지 않았던 hexanoic acid에 크기가 다른 crown ether (18-crown-6 ether, 15-crown-5 ether, 12-crown-4 ether)를 첨가하여 분리효과가 증가하는 것을 연구하였다. hexanoic acid의 농도별로 분리효율을 본 후 가장 분리 효율이 좋은 농도에서 crown ether를 종류와 농도를 다르게 하여 첨가하였다. 그 결과 0.05 M hexanoic acid에서 분리능이 1.72으로 가장 높게 나타났고, crown ether를 첨가하였을 시 분리능이 0.002 M 15-crown-5 ether에서 가장 높게 나왔으며 기존의 분리능보다 2배 이상 더 높았다. 또한 crown ether를 첨가하였을 때 두 금속이 $MLR_3{\cdot}3RH$의 형태로 추출되는 것도 확인 할 수 있었다.

• 한국광물학회지
• /
• 제24권2호
• /
• pp.133-143
• /
• 2011

무주군 적상면 사산리에는 선캠브리아기 화강암질 편마암 복합체가 분포하고 이를 쥬라기 편암질 화강암과 페그마타이트가 관입하고 있으며, 페그마타이브 내 Nb-Ta 광화대가 발달하고 있다. 페그마타이트의 구성광물은 거정질의 석영, 장석류, 및 백운모가 우세하며 장석류는 정장석과 알바이트의 탄종성분을 보여준다. Nb-Ta 광물로는 콜럼바이트가 우세하며 백운모는 후기 마그마 기원으로 콜럼바이트와 밀접히 수반되어 산출한다. 조립의 콜럼바이트는 석영, 장석과 함께 산출하는 반면, 미립의 콜럼바이트는 백운모와 함께 산출하는데 조립질에 비해 미립의 콜럼바이트는 상대적으로 낮은 Nb 함량을 보여준다. 조사지역에 발달한 페그마트이트 맥은 폭 4~15 m, 길이가 각각 120 및 250 m인데, 5개 공 총 600 m 시추 결과 맥의 지하 연장은 별로 좋지 못하며 콜럼바이트는 미량으로 산출하고 있다. 따라서 조사지역에서 희유금속에 대한 광산개발가능성은 적다고 판단된다.