• Title/Summary/Keyword: Rare Value

Search Result 358, Processing Time 0.031 seconds

Excavation Support Design and Stability Analysis of Shallow Tunnel in Heavily Fractured Rock Mass (연약 파쇄 지반내 터널의 굴착.보강 설계 및 안정성 분석)

  • Shin, Hee-Soon;Synn, Joong-Ho;Park, Chan;Han, Kong-Chang;Choi, Young-Hak;Choi, Yong-Ki
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2000.03b
    • /
    • pp.87-92
    • /
    • 2000
  • In excavation of tunnels especially located in shallow depth, it is not rare to meet geological change in excavation progress worse than expected in the initial design stage. This paper present a case study on the re-design of excavation and support system of a shallow tunnel under construction where it meets the unexpected bad geological condition during excavation. The detailed geological investigation shows that the rock mass is heavily weathered and fractured with RMR value less than 20. Considering this geological condition, the design concept is focused on the reinforcement of the ground preceding the excavation of tunnel. Two design patterns, LW-grouting & forepoling with pilot tunnelling method and the steel pipe reinforced grouting method, are suggested. Numerical analysis by FLAC shows that these two patterns give the tunnel and roof ground stable in excavation process while the original design causes severe failure zone around the tunnel and floor heaving. In point of the mechanical stability and the degree of construction, the steel pipe reinforced grouting technique proved to be good for the reinforcement of heavily fractured rock mass in tunnelling. This assessment and design process would be a guide in the construction of tunnels in heavily weathered and fractured rock mass situation.

  • PDF

Structural Characteristics and Maintenance Mechanism of Ulmus pumila Community at the Dong River, Gangwon-do, South Korea

  • Choung, Heung-Lak;Kim, Chul-Hwan;Yang, Keum-Chul;Chun, Jae-In;Roh, Huan-Chuen
    • The Korean Journal of Ecology
    • /
    • v.26 no.5
    • /
    • pp.255-261
    • /
    • 2003
  • To analyze ecological characteristics of the Ulmus pumila community, an on-the-spot survey was conducted in August, 1998 in the Dong River, Gangwon-do, South Korea. The Ulmus pumila community is partially distributed in Dong River's midstream and upper stream. Topographical characteristics of this community are significant in the point bar or sandbank of the river. The community is classified into two types, disturbed and non-disturbed types, by the effect of flooding. The Ulmus pumila community (bush forests of Siberian elms) is a representative community which forms riparian forests, but its distribution is rare in South Korea. Only in Dong River is the Ulmus pumila distributed enough to form a community, and none is known that is lager than this community in South Korea. The non-disturbance type progresses more homogeneously than the disturbance type because it is formed on riverside banks where it is affected less by flooding. We concluded that the Ulmus pumila community in this study area has characteristics of riparian forests. In South Korea, Ulmus pumila community can be regarded as important element of vegetation landscape constituting riparian forests. Specifically, these riparian forests are evaluated as high in conservation value due to their being formed spontaneously. Moreover, Dong River is regarded as the southern limit of Ulmus pumila, which has a northern origin. The species or community needs continuous interests and conservation countermeasures because there are limitations in its spread of distribution by natural or artificial efforts.

ACCURACY TESTS OF 3D RAPID PROTOTYPING (RP) MEDICAL MODELS: ITS POTENTIAL AND CLINICAL APPLICATIONS (Rapid Prototyping으로 제작한 3D Medical Model의 오차 측정에 관한 연구 (임상 적용 가능성 및 사례))

  • Choi, Jin-Young;Choi, Jung-Ho;Kim, Nam-Kuk;Lee, Jong-Ki;Kim, Myeng-Ki;Kim, Myung-Jin;Kim, Yeong-Ho
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.25 no.4
    • /
    • pp.295-303
    • /
    • 1999
  • Presented in this paper are the experimental results that measure rapid prototyping (RP) errors in 3D medical models. We identified various factors that can cause dimensional errors when producing RP models, specifically in maxillofacial areas. For the experiment, we used a human dry skull. A number of linear measurements based on landmarks were first obtained on the skull. This was followed by CT scanning, 3D model reconstruction, and RP model fabrication. The landmarks were measured again on both the reconstructed models and the physical RP models, and these were compared with those on dry skull. We focused on major sources of errors, such as CT scanning, conversion from CT data to STL models, and RP model fabrication. The results show that the overall error from skull to RP is $0.64{\times}0.36mm(0.71{\times}0.66%)$ in absolute value. This indicates that the RP technology can be acceptable in the real clinical applications. A clinical case that has applied RP models successfully for treatment planning and surgical rehearsal is presented. Although the use of RP models is rare in the medical area yet, we believe RP is promising in that it has a great potential in developing new tools which can aid diagnosis, treatment planning, surgical rehearsal, education, and so on.

  • PDF

A Study on the Removal of Unusual Feature Vectors in Speech Recognition (음성인식에서 특이 특징벡터의 제거에 대한 연구)

  • Lee, Chang-Young
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.8 no.4
    • /
    • pp.561-567
    • /
    • 2013
  • Some of the feature vectors for speech recognition are rare and unusual. These patterns lead to overfitting for the parameters of the speech recognition system and, as a result, cause structural risks in the system that hinder the good performance in recognition. In this paper, as a method of removing these unusual patterns, we try to exclude vectors whose norms are larger than a specified cutoff value and then train the speech recognition system. The objective of this study is to exclude as many unusual feature vectors under the condition of no significant degradation in the speech recognition error rate. For this purpose, we introduce a cutoff parameter and investigate the resultant effect on the speaker-independent speech recognition of isolated words by using FVQ(Fuzzy Vector Quantization)/HMM(Hidden Markov Model). Experimental results showed that roughly 3%~6% of the feature vectors might be considered as unusual, and therefore be excluded without deteriorating the speech recognition accuracy.

Respiratory Severity Score as a Predictive Factor for the Mortality of Congenital Diaphragmatic Hernia

  • Ahn, Ja-Hye;Jung, Young Hwa;Shin, Seung Han;Kim, Hyun-Young;Kim, Ee-Kyung;Kim, Han-Suk
    • Neonatal Medicine
    • /
    • v.25 no.3
    • /
    • pp.102-108
    • /
    • 2018
  • Purpose: Congenital diaphragmatic hernia (CDH) is rare but potentially fatal. The overall outcome is highly variable. This study aimed to identify a simple and dynamic parameter that helps predict the mortality of CDH patients in real time, without invasive tests. Methods: We conducted a retrospective chart review of 59 CDH cases. Maternal and fetal information included the gestational age at diagnosis, site of defect, presence of liver herniation, and lung-to-head ratio (LHR) at 20 to 29 weeks of gestational age. Information regarding postnatal treatment, including the number of days until surgery, the need for inhaled nitric oxide (iNO), the need for extracorporeal membrane oxygenation (ECMO), and survival, was collected. The highest respiratory severity score (RSS) within 24 hours after birth was also calculated. Results: Statistical analysis showed that a younger gestational age at the initial diagnosis (P<0.001), a lower LHR (P=0.001), and the presence of liver herniation (P=0.003) were prenatal risk factors for CDH mortality. The RSS and use of iNO and ECMO were significant factors affecting survival. In the multivariate analysis, the only remaining significant risk factor was the highest preoperative RSS within 24 hours after birth (P=0.002). The area under the receiver operating characteristic curve was 0.9375, with a sensitivity of 91.67% and specificity of 83.87% at the RSS cut-off value of 5.2. The positive and negative predictive values were 82.14% and 92.86%, respectively. Conclusion: Using the RSS as a prognostic predictor with simple calculations will help clinicians plan CDH management.

Effects of Post-Harvest Bulk Management System Using Rice Processing Complex on Labor Saving and Quality of Barley (보리 산물처리에 의한 품질변화와 생력효과)

  • 이춘우;윤의병;구본철;백성범;손영구;서세정;남중현;김완석
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.47 no.6
    • /
    • pp.475-478
    • /
    • 2002
  • Post-harvest treatment for barley production requires many steps including drying, cleaning, and packing, and these steps be needed many labor input. Rice processing complex (RPC) is useful for post harvest management system in rice production. However, it is rare to be used for barley production. This study was conducted to explore the variations of quality and labor saving between conventional method and bulk-management system in post-harvest using RPC. The sorting rate was not different between manual method and bulk management. The hardness of non-polished grain was ranged 10,175-10,329 g/$3.14mm^2$, and that for non-polished grain was higher than that for polished grain, but there was not different between drying method. There was not be showed the hunter's value such as L, a and b according to drying method. Cooking characters such as water absorption ratio, swelling ratio, and water soluble extracts by circulated or continued dryer was higher than manual drying using solar heat. Labor input per ha for each cultivation process in bulk-management of barley using rice processing complex was 21 hours, compared to 46 hr/ha in the conventional method, labor input was greatly saved by up to 54.3% in the post-harvest bulk management system.

Ikkam(翼鑑) presumed to be written by Yeonam (연암 저작 추정서 『익감(翼鑑)』에 관하여)

  • Park, Sang-Young
    • The Journal of Korean Medical History
    • /
    • v.27 no.2
    • /
    • pp.121-126
    • /
    • 2014
  • The purpose of this paper is to report a newly discovered book whose title is Ikkam (翼鑑) and prepare for a full-scale study. The book, Ikkam, has a variety of contexts in which it seems to be written by Park Ji-won. First, 'Sanin' in 'Yeonam-Sanin' is consistent with the behaviors of Yeonam Park Ji-won who lived in hiding in the Yeonam valley in 1777. In addition, many statements written in the introduction, such as "as we stick to the old things, we do not know a makeshift", "we are well versed in changes" and "many soldiers are not always good" remind us of other writings of Park Ji-won. Moreover, he writes the statements using antithesis. It is the force of writing style of a literary person who is not engaged in medical service. In addition, he puts six qi in the introduction, but it is not as sophisticated as Jejungsinpyeon (濟衆新編). It suggests that this book may be published earlier than Jejungsinpyeon. When comparing Ikkam with Euimunbogam (醫門寶鑑) and Jejungsinpyeon, it seems common to place six qi in the introduction at the time. In addition, through this book, we find that Park Ji-won known as a writer of Geumryosocho (金蓼小抄) has fairly much knowledge in the medicine. We can estimate his passion and depth about the medicine through a longing for a new medical book shown in the introduction of Geumryosocho. However, various approaches to similar disease symptoms shown in the introduction help us to recognize his true qualities in the medicine. In addition, like other experience prescriptions, this book excludes prescriptions using medicinal herbs with toxicity or rare medicinal herbs in the situation with a limited supply of them in remote areas but includes prescriptions which are widely used. It shows that experience prescriptions in the Joseon Dynasty are effective to specifically identify medicinal herbs and prescriptions which are widely used in Korea. These values cannot be compensated by Donguibogam (東醫寶鑑) which has an infinite value.

The Actuality and Legal Subject of foreign investment to Chinese Medical Market (중국(中國) 의료시장(醫療市場)에 대한 외국인투자현황(外國人投資現況)과 법적(法的) 과제(課題))

  • Jin, Cheng-Hua
    • The Korean Society of Law and Medicine
    • /
    • v.7 no.2
    • /
    • pp.311-330
    • /
    • 2006
  • As issues of education, employment and so on, the medical issue is one of the hot spots of society in China today. The health system reform which was pushed ahead after China's Revolution and open to the outside world hasn't received great progress. Many actual problems haven't been solved, for example it is difficult and expensive to see a doctor. With the development of the economy and society, the citizen's legal consciousness has gradually risen. They make a claim for better medical service. At the same time, the number of the disputes of medical care arises annually. China has sped up the opening of service trade for fulfilling promises of entry the WTO since 2001. China has already opened many service trade fields, including medical field. From the domestic perspective, there are many problems in domestic medical department. From the international perspective, China's present medical level falls behind the world advanced medical level. Under this background, it is a bold act for China to open the medical service field to foreign investors. Today, a huge medical service market is developed in China. However, the government's investment to medical devices and the financing channels is limited. Therefore, it is inevitable that individuals, social organizations and foreign investors invest to the medical market. In view of the situation, Chinese government issued a series of relevant laws and rules. In recent years, many multinational companies, consortiums, charitable institutions, enterprises and individuals establish various medical institutions in China. But there are rare research in the actuality and legal subject of foreign investment to Chinese medical market. Hence, it is necessary to realize the actuality of foreign investment to Chinese medical market, to familiar with the elements and procedure of establishing foreign joint and cooperative medical institution. Meanwhile, analyzing the existing problems and posing the legal subject have important theoretic and practical value.

  • PDF

Nicotine Poisoning Using Nicotine Patches (Nicotine 패치에 의한 Nicotine 중독 증례)

  • Sohn, You-Dong;Lee, Jae-Sung;Kang, Gu-Hyun;Choi, Jung-Tae;Ahn, Moo-Eob;Seo, Jeong-Youl;Ahn, Hee-Cheol
    • Journal of The Korean Society of Clinical Toxicology
    • /
    • v.5 no.1
    • /
    • pp.53-56
    • /
    • 2007
  • Nicotine poisoning arising from the use of nicotine patches is rare. However, because nicotine patches are classified as an OTC drug, the risk of misuse or abuse is increasing. Nicotine poisoning using nicotine patches shows an unusual clinical presentation compared to that from oral ingestion of multiple doses of nicotine. We present a case of misused nicotine patches that cause a nicotine poisoning. A thirty-nine year-old healthy man visited the ER with complaints of an intermittent cramping abdominal pain with nausea and vomiting. Upon physical examination, there were no specific findings except increased bowel sounds, and the patient's initial laboratory findings were also unremarkable except for an increased bilirubin level. CT revealed a mild degree of fatty liver. The patient's symptoms did not improve any further with conservative management. During his ED stay, we meticulously took his history again, and we discovered that he had used nicotine patches for three days, six days before admission, and had misused the nicotine patches as NSAID patches. The patient's diagnosis of nicotine poisoning was confirmed by a urine cotinine level ten times the normal value. After a 12-hour stay in the ED, his symptoms disappeared without any specific management.

  • PDF

A Study on the Adoption of Electronic Contract Service (전자계약서비스의 문제점과 해결방안)

  • Choi, Seok-Beom;Kim, Tae-Hwan;Kim, In-Kyung;Kim, Jae-Hak;Park, Sun-Young;Yoon, Young-Rim
    • THE INTERNATIONAL COMMERCE & LAW REVIEW
    • /
    • v.34
    • /
    • pp.157-185
    • /
    • 2007
  • The purpose of this thesis is to contribute to the activation of e-contract service for one stop e-trade by analyzing the problems and its solutions in e-contract service at home and abroad. In order to achieve the purpose of this thesis, case studies are done on e-contract service providers such as CECTRUST service of NTT DATA in Japan and HanCM.com of Haansoft in Korea and user companies such as Taisei Corporation using CECTRUST service and Hyundai Card using HanCM.com. The problems in the e-contract service are the lack of e-contract service providers, rare publicity of e-contract service, limited use of e-contract service at only home, higher pricing for e-contract service, short time management of e-contract documents by service providers, no application of newly developed security technology to e-contract service, unsatisfaction of requirements of e-contract service provider as trusted third party, absence of lower pricing e-contract service by service provider, authorizing key error in electronic signature under recognized authentication system in case of fail in renewal of digital certificate and reproduction of digital certificate. The solutions of these problems are the upbringing of e-contract service providers, broad publicity of e-contract service, development of e-contract service on a global basis, establishment of lower pricing for e-contract service, long time management of e-contract documents by service providers, application of newly developed security technology such as bio technology to e-contract service, satisfaction of requirements of e-contract service provider as trusted third party by designation of recognized e-document repository, development of lower e-contract service by way of application service provider(ASP), introduction of time stamping of e-contract document and signature key value. The limitation of this thesis is that the problems and its solutions could not meet with the broad recognition as they are conferred by intuition because of few e-contract service provider.

  • PDF