• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.105-116
• /
• 2017

The purpose of this study is to provide the information on genesis of obsidian occurring in the southwestern part of Ulleung Island, Korea, and to discuss its implications for volcanic activity through volcanological and mineralogical properties of obsidian. Obsidian occurs locally at the lower part of the Gombawi welded tuff, showing various complex textures and flow banding. Though obsidian is mostly homogeneous, it is closely associated with alkali feldspar phenocrysts, reddish tuff, and greyish trachyte fragments. The obsidian occurs as wavy, lenticular blocks or lamination composed of fragments. Cooling fractures developed on obsidian glass are characterized by perlitic cracks, orbicular or spherical cracks, indicating that obsidian rapidly quenched to form an amorphous silica-rich phase. It is evident that hydration took place preferentially at the outer rim relative to the core of obsidian, forming alteration rinds. The glassy matrix of obsidian includes euhedral alkali feldspars, diopside, biotite, ilmenite, and iron oxides. Microlites in glassy obsidian are composed mainly of alkali feldspars and ilmenite. Quantitative analysis by EPMA on the obsidian glass part shows trachytic composition with high iron content of 3 wt.%. Accordingly, obsidian formed with complex textures under a rapid cooling condition on surface ground, with slight rheomorphism. Such results might be induced by collapse of lava dome or caldera, which produced the block-and-ash flow deposit and the transportation into valley while keeping high temperatures.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.1
• /
• pp.13-19
• /
• 1999

Canalicular liver plasma membrane vesicles (cLPM) were prepared according to two different methods (Inoue method and Meier method), and were evaluated for their protein yield, enzyme activity and transport characteristics. No difference was found between the methods in the protein yield (i.e., $0.14{\pm}0.031$ and $0.15{\pm}0.050$ mglg liver for Inoue method and Meier method, respectively). The activity of alkaline phosphatase, a marker enzyme of canalicular membrane, was significantly (P<0.05) higher in the vesicles of Meier method $(3.52{\pm}0.91\;mmol/mg/hr)$than in the vesicles of Inoue method ($2.28{\pm}0.94$ mmol/mg/hr) indicating that more purified cLPM were obtained from Meier method compared with Inoue method. ATP-dependent vesicular uptake of taurocholate and tributylmethylammonium (TBuMA) was observed for vesicles of both methods, and the kinetic parameters responsible for the transport were similar between the vesicles of both methods (for example, $V_{max}:$ 9.72 nmol/mg protein/30sec and $K_m:$ 0.63 mM for Inoue method; $V_{max}:$ 10.1 nmol/mg protein/30sec and $K_m:$ 0.70 mM for Meier method). A pH gradient dependent counter transport of TBuMA was also observed for both vesicles with similar kinetic characteristics. Either the uptake of taurocholate in the absence of ATP or that of TBuMA in the absence of pH gradient, which may represent passive diffusion of respective compound into the vesicles, was more rapid for the vesicles of Meier method than for the vesicles of Inoue method. For example, passive diffusion rate constants $(K_d)$ for TBuMA uptake into the vesicles were 0.00030 and 0.00052\;{\mu}l/mg$ protein/min for the vesicles of Inoue method and Meier method, respectively. It may indicate that more leaky vesicles are obtained form the Meier method compared with the Inoue method. These aspects together with the time necessary to prepare the vesicles (i.e., 8 hr for Inoue method and 23 hr for Meier method) should be considered before selecting an appropriate method for the preparation of cLPM.

• Science of Emotion and Sensibility
• /
• v.11 no.3
• /
• pp.387-396
• /
• 2008

The paradigm of a product taking a sudden turn of technical development is due to a change of the needs of diversified user, and this shows that users emphasizes on the value of the sensitivity than the standardized form and usableness of the product, and the value of such a sensitivity can relate to the needs of the product, and it can be filled up eventually by the rapid completion of the product. The creativity will be the most important ability in the future society, it is an added value to all the profession workers which people can use that to increase their competitiveness ability. It is recognized the value of the sensitivity represents the feels psychological aspect of the user and it would be the future design trend, by doing this, products designed would be different from the existing products in the market. I am going to show you that this can be used in the design concept derivation process, there is several core design elements in the product development process, these elements can not only represent the basic user needs but also the user inner unconscious needs, at the same time it keeps the aesthetic concern.

• Microbiology and Biotechnology Letters
• /
• v.34 no.1
• /
• pp.58-62
• /
• 2006

Rapid assay of enzyme is a primary requirement for successful application of directed evolution technology. Halo generation on a turbid plate would be a method of choice for high throughput screening of enzymes in this context. Here we report a new approach to prepare turbid plates, by controlling the crystallization of tyrosine to form needle-like particles. In the presence of tyrosine phenol-lyase (TPL), the needle-like tyrosine crystals were converted to soluble phenol rapidly than the usual rectangular tyrosine crystals. When an error-prone PCR library of Citrobacter freundii TPL was spread on the turbid plate, approximately 10% of the colonies displayed recognizable halos after 24 hours of incubation at $37^{\circ}C$. Representative positives from the turbid plates were transferred to LB-medium in 96-wellplates, cultivated overnight, and assayed for the enzyme activity with L-tyrosine as the substrate. The assay results were approximated to be proportional to the halo size on turbid plates, suggesting the screening system is directly applicable to the directed evolution of TPL. Actually, two best mutants on the turbid plates were identified to be $2{\sim}2.5$ and 1.5-fold improved in the activity.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.4
• /
• pp.280-287
• /
• 2015

The high time-resolution monitoring data are essential to estimate rapid changes in chemical compositions, concentrations, formation mechanisms, and likely sources of atmospheric particulate matter (PM). In this study, $PM_{2.5}$ sulfate, $PM_{2.5}$, $PM_{10}$, and the number concentration of size-resolved PMs were monitored in Fukuoka, Japan by good time-resolved methods during the springtime. The highest monthly average $PM_{2.5}$ sulfate was found in May ($8.85{\mu}g\;m^{-3}$), followed by April ($8.36{\mu}g\;m^{-3}$), March ($8.13{\mu}g\;m^{-3}$), and June ($7.22{\mu}g\;m^{-3}$). The cases exceed the Japanese central government's safety standard for $PM_{2.5}$ ($35{\mu}g\;m^{-3}$) reached 10.11% during four months campaign. The fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ varied from 12.05% to 68.11% with average value of 35.49% throughout the entire period of monitoring. This high proportion of sulfate in $PM_{2.5}$ is an obvious characteristic of the ambient $PM_{2.5}$ in Fukuoka during the springtime. However, the average fraction of $PM_{2.5}$ sulfate to $PM_{2.5}$ in three rain events occurred during our intensive campaign fell right down to 15.53%. Unusually high $PM_{2.5}$ sulfate (> $30{\mu}g\;m^{-3}$) marked on three days were probably affected by the air parcels coming from the Chinese continent, the natural sulfur in the remote marine atmosphere, and a large number of ships sailing on the nearby sea. The theoretical number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ was originally calculated and then compared to $PM_{2.5}$ sulfate. A close resemblance between the diurnal variations of the theoretically calculated number concentration of $(NH_4)_2SO_4$ in $PM_{0.5-0.3}$ and $PM_{2.5}$ sulfate concentration indicates that the secondary formed $(NH_4)_2SO_4$ was the primary form of sulfate in $PM_{2.5}$ during our monitoring period.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.4
• /
• pp.565-591
• /
• 2008

Using theories of sectoral innovation system and supply chain management, this paper examines the status quo of Korean IT SoC industry's innovation system by comparing it with Taiwanese one. Taiwan IT SoC industry has accomplished a rapid growth on the basis of government policies that foster domestic firms after the establishment of Hsinchu Science Park. Cooperative networks between foundries firms and fablesses have been formed within the supply chain in this process. Therefore, Taiwan industry has possessed the possibility of the coevolution in sectoral innovation system. However, Korean IT SoC industry has failed to form cooperative networks, because of weak networks between related firms. In other words, there exists an interaction failure, which is a kind of the system failure, and it means a lack of linkage between actors as a result of insufficient use of complementarities and interactive learning. Therefore, Korean industry has little possibility of the coevolution in sectoral innovation system. The cooperative networks between actors are prerequisite towards evolution of innovation system of Korean IT SoC industry. Above all, the cooperative networks between fablesses and system companies need to be strengthened within the supply chain.

• Journal of Distribution Science
• /
• v.11 no.12
• /
• pp.13-23
• /
• 2013

Purpose - There is a dominant opinion that medium and small enterprises in the Korean economy have not developed qualitatively but only towards quantitative growth and, therefore, the unbalanced structure between large enterprises and those that are medium and small has worsened. In particular, this rapid industrialization causes after-effects such as polarization as well as anti-business sentiment, the collapse of the middle class, and hostility against the establishment. The consensus contends that it is difficult for Korea to be an advanced nation without resolving these problems. This paper attempts to suggest a co-prosperity model by limiting the focus to business relations with medium and small manufacturers (with regard to investment among the various co-prosperity institutions of POSCO). These co-prosperity institutions have been established in POSCO; however, it is thought that the development of a co-prosperity model regarding investment in medium and small manufacturers will help many needy investment manufacturers. Research design, data, and methodology - This study analyzes research on the co-prosperity model, using it to examine Korean cases and foreign cases. The co-prosperity model has been continuously extended but is determined to be seriously insufficient. The purpose of this study is to develop the Korean co-prosperity model by reinterpreting it in various aspects. In order to develop the Korean co-prosperity model, this study suggests the case of the establishment of the co-prosperity model by POSCO with medium and small manufacturers with regard to investment. This model is expected to be presented to many enterprises as the future co-prosperity model. Results - To date, analysis of the co-prosperity model itself and the co-prosperity model through the case of POSCO have been suggested. As empirical studies on co-prosperity in Korea are not sufficient, successful models of co-prosperity should be developed in various aspects in future. It is expected that through this study, medium and small manufacturers would have an opportunity to find various growth engines by actively using the cooperation platform and establishing optimized competitiveness of steel material through a steel business model. The ecosystem of enterprises may evolve and be healthier by making more joint products through productive business relationships between large enterprises and those that are medium and small. From the enterprises' ecosystem viewpoint, cooperation between such businesses rather than one-way support is identified as an essential element for the security of inter-competitiveness. Conclusions - Infrastructure should be established to form a dynamic industry ecosystem not by transient efforts in co-prosperity, but by an entire culture of co-prosperity across industries. In this respect, the leading role of public institutions needs to be intensified initially. In addition, the effects of co-prosperity should be extended to blind spots of policies such as third party companies and regions. A precise co-prosperity monitoring system should be established to continuously conduct and extend these efforts.

• Strategy21
• /
• s.30
• /
• pp.143-176
• /
• 2012

We are witnessing the growing maritime tension on the East Asian sea these days. Each naval powers in the region are competing each other to acquire more advanced naval capabilities. Based upon the rapid economic development, China is actively beefing up its naval capabilities and expand its boundary of naval activities all over the East Asian region. Chinese Navy already unveiled its expansive naval strategy replacing the traditional concept of 'Near-Sea Defense' with the new concept of 'Far-Sea Defense' strategy. In response to potential rival's naval build up, the U.S. is redeploying its naval forces focusing on the Asia-Pacific region. The U.S. enhances its joint naval exercises with the countries in the region, such as Japan, India, Australia and so on. In addition, Washington is devising new naval strategy under the concept of 'Air-Sea Battle' to deter Peking's so-called 'Anti-Access/ Area Denial(A2AD)' strategy. As a close ally of the U.S., Japan also disclosed its clear intention to strengthen the Maritime Self Defense Force(MSDF)'s capabilities by introducing the new concept of 'Dynamic Defense Force' in 2011. Under the new concept, JMSDF is pursuing the additional acquisition of submarines, quasi-aircraft carriers, Aegis-equipped destroyers, etc. Under the new president's strong leadership, Russia is also invigorating the naval build-up. Especially, Russia is fortifying the Pacific Fleet's naval assets by deploying new-type of naval ships such as the Mistral which was imported from France. In the midst of competitive naval build-up among the major naval powers in the region, we are observing the growing maritime conflicts on the East China Sea as well as South China Sea. Those naval conflicts can pose severe threats to our national interests. Maritime conflicts on the East or South China Sea can imperil our sea lanes which will be indispensible for national economic development. Neighboring countries' maritime conflicts also will cast an uncertainty on the path to mobilize international cooperation to resolve the North Korean issues. We should contribute to ease the maritime tension in the region by various ways. First, we should actively galvanize the bilateral maritime dialogue among the major naval powers in the region. Second, we also should take the lead to form a multilateral maritime cooperation mechanism in the region. Above all, we should set the aim to be a peaceful maritime power who can contribute to a building of stable maritime order in the region with a considerable naval power.

• Cartoon and Animation Studies
• /
• s.31
• /
• pp.57-89
• /
• 2013

Animation tool has been made changes rapid development of animation from analog tool to digital authoring tool. Depending on the change in the status of digital authoring tools, education of digital authoring tool has brought many changes occurred in the institute and university. Digital authoring tool was insufficient for research of authoring tool due to the recognition that authoring tool is a simple tool. I try to resolve the difficulties through the analysis digital authoring tools to students studying at the university. In addition, Suggests social/cultural change of animation practitioners and effective training methods of digital authoring tools in the education of beginners and practitioners. This tool have perceptual knowledge and narrative knowledge. Since the language features and knowledge features is difficult to learn. it must be learned knowledge of computer graphics of professional level properly to learn. Then users should try to be creative within the authoring tool to produce creative results. also formed the community and to exchange information for self-development further it should form job market that authoring tool make formed through medium. So, I think that there is a need to change academically attitude to authoring tool. because this is not only the positive side but it occurs phenomenon to enslave users in authoring tool, and blind faith in the authoring tool or critical stance on software. It was a lot of pre-existing research that investigate engineering and industrial side in the authoring tool. Through this thesis, We will find social/cultural features and academic significance, and investigate that how to approach the method of education.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.3-13
• /
• 2018

The formwork cost amounts for a significant proportion of project construction costs. It costs 10-15% of the total construction cost and 30-40% of the frame structure construction cost. In addition, the formwork collapse accidents are frequently causing deaths in the construction industry, and thus, is known to be of relatively high degree of risk. As so, the accuracy of structural calculation and quantity take-off when planning the formwork in a construction project are a very important matter. Accordingly, this study develops a BIM based formwork design prototype, that enables the construction manager to optimize the design through applying the proposed new IFC entities associated with the formwork design. The approach proposed in this study is expected to support the construction manager with accurate quantity calculation and rapid planning and construction. Since this study considered specific small-scale buildings using Euro-form and show the possibility of utilizing BIM entities in the formwork design process, further research is recommended towards the limitations in applying the system to other types of formworks.