• 식품과학과 산업
• /
• 제55권1호
• /
• pp.58-73
• /
• 2022

최근 저칼로리 식품에 대한 수요로 인해 청량 음료 등 다양한 식품에서 비영양 감미료 사용이 증가하고 있다. 소비자들은 혈당 조절이 가능하고 치아 부식 위험이 적으며 낮은 칼로리를 갖는 대체 감미료를 찾고 있으며, 설탕에 비해 감미도가 높은 비영양 감미료가 식품에 널리 사용되고 있다. 식품에 허용되는 감미료 목록 및 함량 기준은 국가마다 다르며, 규제기관과 식품 산업체 등은 감미료가 사용된 제품을 모니터링하여 전세계 규정을 준수하는지 확인하는 것이 중요하다. 또한, 식품첨가물로서 감미료를 국민들이 얼마나 섭취하며, 이로부터 안전성에는 문제가 없는지에 대한 섭취량 평가를 실시하려면 식품 매트릭스에 따른 정확하고, 재현성 있는 분석법이 수반되어야 한다. 즉, 식품산업의 품질 관리, 시장 감시 및 모니터링 등에 적용되는 다양한 감미료를 동시에 분석하기 위해서는 효율적이고 신속한 분석법의 개발이 필수적이고, 해당하는 매트릭스에 따라 용매 추출, 정제 등 적절한 전처리 단계를 수행하는 것이 중요하다. 본 연구에서는 비영양 감미료를 중심으로 최근 분석 동향을 조사하고, 각 식품 유형에 적합한 추출방법을 선택하는 데에 도움이 되도록 방법 및 결과를 제시하였다. 또한 국내 및 국외 공인시험법을 조사하고, HPLC, LC-MS/MS를 이용한 다성분 동시분석에 대한 기술과 FT-IR 등을 이용한 비파괴 분석 기술까지 종합적으로 정리하였다.

• 농업과학연구
• /
• 제46권2호
• /
• pp.257-271
• /
• 2019

The use of food grade hexane (FGH) for edible oil extraction is responsible for the presence of benzene in the crude oil. Benzene is a Group 1 carcinogen and could pose a serious threat to the health of consumer. However, its detection still depends on classical methods using chromatography which requires a rapid non-destructive detection method. Hence, the aim of this study was to investigate the feasibility of using Fourier transform infrared (FTIR) spectroscopy combined with multivariate analysis to detect and quantify the benzene residue in edible oil (sesame and cottonseed oil). Oil samples were adulterated with varying quantities of benzene, and their FTIR spectra were acquired with an attenuated total reflectance (ATR) method. Optimal variables for a partial least-squares regression (PLSR) model were selected using the variable importance in projection (VIP) and the selectivity ratio (SR) methods. The developed PLS models with whole variables and the VIP- and SR-selected variables were validated against an independent data set which resulted in $R^2$ values of 0.95, 0.96, and 0.95 and standard error of prediction (SEP) values of 38.5, 33.7, and 41.7 mg/L, respectively. The proposed technique of FTIR combined with multivariate analysis and variable selection methods can detect benzene residuals in edible oils with the advantages of being fast and simple and thus, can replace the conventional methods used for the same purpose.

• 분석과학
• /
• 제26권5호
• /
• pp.340-351
• /
• 2013

The chemical element and structural characterization of different types of cements and its brick stones are been investigated under forensic aspects using X-ray florescence (XRF) and X-ray diffraction (XRD) spectrometer. The XRF provides rapid compositional data for controlling almost all stages of raw materials, clinker and cement. The decisive advantage of XRD methods is based on the unique character of the diffraction patterns of crystalline substances, the ability to distinguish between elements and their oxides, and the possibility to identify chemical compounds, polymeric forms, and mixed crystals by non-destructive examination. Therefore, combination of these examinations is useful and able to apply for the forensic analysis in comparison of cements and brick stones. There are more study remained to determine the viability of method for forensic analysis of brick stones and the limits of the discrimination that can be achieved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.930-933
• /
• 2005

Non-destructive inspection techniques using laser have been breading their application areas as well as growing their measurement skills together with the rapid development of circumferential technology like fiber optics. computer and image processing The ESPI technique is already on the stage of on-line testing with commercial products in developed country nations. Especially, this technique is expected to be applied to the nuclear industry, automobile and aerospace because it is proper for the vibration measurement and it can be applied to objects of a high temperature. This paper describes the use of the ESPI system for measuring vibration patterns on the reflecting objects. Using this system, high-quality Jo fringes for identifying mode shapes are displayed. A bias vibration is introduced into the reference beam to shift the Jo fringes so that fringe shift algorithms can be used to determine vibration amplitude. Using this method. amplitude fields for vibrating objects were obtained directly from the time-average interferometer recorded by the ESPI system.

• 산업기술연구
• /
• 제43권1호
• /
• pp.7-13
• /
• 2023

Nowadays, traffic congestion is emerging as a major problem due to the rapid population growth and the increase in automobiles. The train is a convenient means of transportation that can efficiently solve these problems. Trains have been developed in line with human aspirations for a long time, but research on safety is still insufficient. This study aims to check safety by conducting static tests and fatigue tests on bogie frames, and to help develop bogie frames in the future. For the static test, a strain gauge was attached to the point where the local stress concentration was expected beforehand, and the result value was derived, compared with existing theories, and expressed as a Goodman diagram. In the fatigue test, a total of 10 million loads were applied over three stages, and no cracks appeared in the non-destructive test conducted after each stage. Both tests were conducted according to the strict test method of the bogie frame presented by the UIC Code. It satisfied both fatigue life and strength evaluation criteria and was judged to be a bogie frame usable for safe train production.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.146-152
• /
• 2020

본 연구는 강교량의 폐합부재 등 시각적으로 탐지하기 어려운 부위의 강재에 대한 손상을 탐지하기 위한 방법을 개발하기 위한 목적의 기초연구이다. 여러 비파괴 방법들 중에서 초음파 속도법을 활용하여 두께가 다른 시편에 대해서 초음파 속도법을 실시하여, 평균 매질내 전파속도를 도출하였고, 이를 활용하여 강재 부재에 대한 회귀분석을 실시하였다. 동일한 재료일 경우 회귀분석의 결과를 활용하면 다른 부재의 두께를 도출할 수 있을 것으로 예상된다. 또한, 광범위한 범위를 스캐닝하기 위해 200 mm/s로 이동하는 연속스캐닝 기법을 검토하였고, 두께가 변화는 부재의 두께를 효과적으로 예측할 수 있었다.

• 환경위생공학
• /
• 제22권4호
• /
• pp.65-76
• /
• 2007

The possibility of rapid quantitative analysis of AV(Acid Value), IV(Iodine Value) and fatty acids in vegetable oils with NIRS(Near-infrared spectroscopy) was evaluated. A calibration equation calculated by MPLS regression technique was developed and correlation coefficient of determination for AV, IV, $C_{16:0},\;C_{18:0},\;C_{18:1},\;C_{18:2},\;C_{18:3},\;and\;C_{20:0}$ content were 0.9727, 0.997, 0.9805, 0.942, 0.9987, 0.9994, 0.9966, and 0.975 respectively. According to the data obtained from validation study, $R^2$ of contents of perilla, corn, soybean, rapaseed oils were 0.897, 0.993, 0.935, 0.707, 0.994, 0.996, 0.984, 0.798, SEP of contents of 0.185, 1.367, 0.899, 0.640, 1.498, 1.360, 0.476, 0.076 by MPLS. The results indicate that the NIRS procedure can potentially be used as a non-destructive analysis method for the rapid and simple measurement of AV, IV and fatty acids in vegetable oils.

• Journal of Radiation Protection and Research
• /
• 제41권4호
• /
• pp.359-367
• /
• 2016

Background: As new legislation has come into force implementing radiation safety management for the use of naturally occurring radioactive materials (NORM), it is necessary to establish a rapid and accurate measurement technique. Measurement of $^{238}U$ and $^{232}Th$ using conventional methods encounter the most significant difficulties for pretreatment (e.g., purification, speciation, and dilution/enrichment) or require time-consuming processes. Therefore, in this study, the applicability of ED-XRF as a non-destructive and rapid screening method was validated for raw materials and by-product samples. Materials and Methods: A series of experiments was conducted to test the applicability for rapid screening of XRF measurement to determine activity of $^{238}U$ and $^{232}Th$ based on certified reference materials (e.g., soil, rock, phosphorus rock, bauxite, zircon, and coal ash) and NORM samples commercially used in Korea. Statistical methods were used to compare the analytical results of ED-XRF to those of certified values of certified reference materials (CRM) and inductively coupled plasma mass spectrometry (ICP-MS). Results and Discussion: Results of the XRF measurement for $^{238}U$ and $^{232}Th$ showed under 20% relative error and standard deviation. The results of the U-test were statistically significant except for the case of U in coal fly ash samples. In addition, analytical results of $^{238}U$ and $^{232}Th$ in the raw material and by-product samples using XRF and the analytical results of those using ICP-MS ($R^2{\geq}0.95$) were consistent with each other. Thus, the analytical results rapidly derived using ED-XRF were fairly reliable. Conclusion: Based on the validation results, it can be concluded that the ED-XRF analysis may be applied to rapid screening of radioactivities ($^{238}U$ and $^{232}Th$) in NORM samples.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.44-44
• /
• 2017

The objective of this study was to evaluate firmness, and sweetness index (SI) of tomatoes (Lycopersicum esculentum) by using hyperspectral imaging (HSI) in the range of 1000-1400 nm. The mean spectra of the 95 matured tomato samples were extracted from the hyperspectral images, and the reference firmness and sweetness index of the same sample were measured and calibrated with their corresponding spectral data by partial least squares (PLS) regression with different preprocessing method. The results showed that the regression model developed by PLS regression based on Savitzky-Golay (S-G) second-derivative preprocessed spectra resulted in better performance for firmness, and SI of tomatoes compared to models developed by other preprocessing methods, with correlation coefficients (rpred) of 0.82, and 0.74 with standard error of prediction (SEP) of 0.86 N, and 0.63 respectively. Then, the feature wavelengths were identified using model-based variable selection method, i.e., variable important in projection (VIP), resulting from the PLS regression analyses and finally chemical images were derived by applying the respective regression coefficient on the spectral image in a pixel-wise manner. The resulting chemical images provided detailed information on firmness, and sweetness index (SI) of tomatoes. Therefore, these research demonstrated that HIS technique has a potential for rapid and non-destructive evaluation of the firmness and sweetness index of tomatoes.

• 한국정보통신학회논문지
• /
• 제20권11호
• /
• pp.2085-2092
• /
• 2016

IC 기판의 가장 중요한 성질들의 하나는 넓은 영역에 걸쳐 균일해야만 한다는 것이다. 웨이퍼 결함 분석의 다양한 물리적 접근 방법 중에서 적외선 조사 기법에 특별한 관심이 모아지고 있다. 특히, 높은 공간적 분해력을 가지고 있는 근적외선 흡수 방법은 반-절연 GaAs 내의 결함들을 직접적으로 관찰하는데 이용되고 있다. 적외선 전송에 기초를 둔 이 기법은 신속하고 비파괴 적이다. 이 방법은, 직접적으로 GaAs 반도체의 적외선 영상은 결함의 광흡수 작용에 기인한 것임을 밝히고 있다. 반-절연 GaAs 내의 EL2에 관련된, 비 균일 적으로 분포된 결함들의 적외선 흡수 영상에서 콘트라스트가 반전되는 현상에 대해 새로운 모델을 제시하고 있다. 저온 포토퀀칭 실험은, 직접적인 방법으로, GaAs 웨이퍼의 콘트라스트 반전 영상은 밴드갭의 지엽적인 변동이나 전하 재분포에 의한 것이 아니라 흡수와 산란의 두 메커니즘에 의한 것임을 증명하고 있다.