• 제목/요약/키워드: Rapid kinetics

검색결과 133건 처리시간 0.026초

Separation of cadmium and chromium heavy metals from industrial wastewater by using Ni-Zn nanoferrites

  • Thakur, Atul;Punia, Pinki;Dhar, Rakesh;Aggarwal, R.K.;Thakur, Preeti
    • Advances in nano research
    • /
    • 제12권5호
    • /
    • pp.457-465
    • /
    • 2022
  • The potentials of NixZn1-xFe2O4 (x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) nanoadsorbents were investigated for removal of Cd and Cr from contaminated water from an electroplating industry in Himachal Pradesh, India. Optimal values were recorded under batch adsorption experiments performed to remove dissolved heavy metal ions from industrial wastewater. The specific surface area (SSA) of nanoadsorbents perceived to vary in a range 35.75-45.29 cm2/g and was calculated from the XRD data. The influence of two operating parameters, contact time and dopant (Ni) concentration was also investigated at pH ~7 with optimum dosage. Kinetic studies were conducted within a time range of 2-10 min with rapid adsorption of cadmium and chromium ions onto Ni0.2Zn0.8Fe2O4 nanoadsorbents. Pseudo-second-order kinetic model was observed to be well fitted with the adsorption data that confirmed the only existence of chemisorption throughout the adsorption process. The maximum adsorption efficiency values observed for Cd and Cr were 51.4 mg/g and 40.12 mg/g, respectively for different compositions of prepared series of nanoadsorbents. The removal percentage of Cd and Cr was found to vary in a range of 47.7%-95.25% and 21%-50% respectively. The prepared series of nanoferrite found to be suitable enough for adsorption of both heavy metal ions.

프러시안 블루가 함입된 자성 야누스 미세 흡착제 개발 및 이를 이용한 폐수 내 세슘정화 (Development of Prussian Blue-laden Magnetic Janus Micro-adsorbents for Remediation of Cs+ Ions in Wastewater)

  • 정주언;경동현;강성민
    • Korean Chemical Engineering Research
    • /
    • 제62권2호
    • /
    • pp.181-190
    • /
    • 2024
  • 본 연구는 자성 야누스 미세 흡착제를 합성하기 위해 쉽고 빠르며 대량생산이 가능한 원심력 기반 미세유체 반응기를 개발하였다. 두 개의 정렬된 주사침과 원심분리 튜브로 구성된 다중 미세노즐을 사용함으로써 높은 균일도를 갖는 프러시안 블루와 자성 나노입자의 함입이 이루어진 미세 흡착제(PB-MNP-MAs)를 합성하였다. 등온흡착과 흡착속도 실험을 통해 다공성 구조 및 프러시안 블루 나노입자의 넓은 비표면적을 갖는 미세 흡착제의 향상된 세슘 흡착 성능을 증명하였으며 이를 통해 10분 이내의 빠른 흡착을 유도할 수 있다. 흡착 공정 후, 외부 자기장 도입을 통해 세슘 수용액 내에서 합성된 PB-MNP-MAs를 성공적으로 회수하였다. 따라서 본 연구결과를 바탕으로 생물 및 환경 제염 분야에서 기능성 흡착제 발전을 위한 새로운 방향성을 제공해 줄 것으로 기대한다.

어장유의 속성발효와 동력학적 고찰 (Rapid Fermentation of Fish Sauce and Its Kinetics)

  • 김병삼;박상민;최수일;김장양;한봉호
    • 한국수산과학회지
    • /
    • 제19권1호
    • /
    • pp.10-19
    • /
    • 1986
  • A study on the rapid fermentation of fish sauce has been carried out for effective utilization of sardine. The frozen sardine was thawed at room temperature, chopped, homogenized with equal amount of water and then hydrolyzed by addition of commercial proteolytic enzymes such as bromelain, papaya protease, ficin and a enzyme mixture under different conditions of hydrolysis. The effect of wheat gluten for masking fishy odor and color development during thermal treatment were also tested. The reaction mixture was heated for 30 minutes at $100^{\circ}C$ for enzyme inactivation, pasteurization and color development and then centrifuged for 20 minutes at 4,000 rpm. Finally, table salt and benzoic acid were added for bacteriostatic effect. The results were summarized as follows ; 1. The hydrolyzing temperature, time, pH and the concentration of enzymes based on the weight of whole sardine for optimal hydrolysis were as follows: autolysis, $52.5^{\circ}C$, 4 hours, pH 8.0: with $0.25\%$ bromelain, $52.5^{\circ}C$, 4 hours, pH 6.6 :with $0.25\%$ ficin, $52.5^{\circ}C$, 4 hours, pH 6.8: with $0.3\%$ papaya protease, $52.5^{\circ}C$, 4 hours, pH 6.6: with $6\%$ enzyme mixture, $52.5^{\circ}C$, 4 hours, pH 6.9, respectively. But pH control was not much beneficial in increasing yield. 2. The hydrolytic reaction of chopped sardine with proteolytic enzymes could be interpreted as a first order reaction that devided into 2 periods with different reaction rate constsnts. $Q_{10}$ values of the first period prior to 4 hours were 1.23 to 1.31, and those of post 4 hours were 1.25 to 1.55. The corresponding activation energies were $1.81{\times}10^4\;to\;2.34{\times}10^4\;kJ/kmol$ and $1.92{\times}10^4\;to\;3.77{\times}10^4\;kJ/kmol$, respectively. 3. The reasonable amount of $75\%$ vital wheat gluten for addition was $9\%$ of chopped sardine. 4. The dark brown color was mainly developed during the thermal treatment for 30 minutes at $100^{\circ}C$ and not changed during storage.

  • PDF

T7 박테리오파지 gp4 DNA helicase에 의한 DNA unwinding에서 step size의 반응속도론적 측정 (Kinetic Measurement of the Step Size of DNA Unwinding by Bacteriophage T7 DNA Helicase gp4)

  • Kim, Dong-Eun
    • 생명과학회지
    • /
    • 제14권1호
    • /
    • pp.131-140
    • /
    • 2004
  • T7박테리오파지 gp4는 dTTP 가수분해에너지를 이용하여 DNA복제시 이중 나선 DNA를 단일가닥 DNA로 풀어내는 나선효소(helicase)이다. T7 나선효소의 활성형의 4차구조는 한가운데 구멍을 지닌 육량체 고리모양이다. 단일가닥 DNA는 나선효소가 $5'\rightarrow3'$방향으로 이동할 때 육량체 고리의 구멍으로 빠져나간다. 이러한 DNA의 이중나선 풀어헤침을 빠른 효소반응속도 측정법을 이용하여 정량적으로 측정하였으며, 그 결과 단일가닥 DNA 산물들이 생성되기 전에 지연상태(lag phase)가 존재함을 관찰하였다. 이러한 지연상태를 나선효소에 의한 이중나선 DNA의 풀어헤침이 속도론적 단계과정(kinetic stepping)을 거친다는 모델로써 분석하였다. 예상대로 이중나선의 길이가 클수록 지연상태의 지속시간이 늘어났다. $\tau7$ 나선효소가 이중나선 DNA를 풀어내는 과정에서 넣어준 trap DNA는 풀어내는 이중나선 DNA의 양을 변화시키지 못하여서, $\tau7$ 나선효소가 매우 큰 공정성을 지닌 효소임을 알 수 있었다. 이러한 속도론적 data를 global fitting법을 써서 kinetic stepping 모델에 적용한 결과 매 단계(step)마다 10∼l개의 염기쌍이 풀려지고 1초당 3.7번의 step이 일어난다는 것을 알 수 있었다. DNA 풀어헤침과 dTTP가수분해의 메커니즘과 이들의 연계성은 $4∼37^{\circ}C$사이의 온도범위에서 영향을 받지 않았다. 이상을 종합할 때, T7나선효소의 이중나선 DNA의 풀어헤침 시 나타나는 속도론적 단계과정은 DNA복제 시 이용되는 나선효소의 내재적 속성임을 알 수 있다.

Comparative analysis of the in vivo kinetic properties of various bone substitutes filled into a peri-implant canine defect model

  • Jingyang Kang;Masaki Shibasaki;Masahiko Terauchi;Narumi Oshibe;Katsuya Hyodo;Eriko Marukawa
    • Journal of Periodontal and Implant Science
    • /
    • 제54권2호
    • /
    • pp.96-107
    • /
    • 2024
  • Purpose: Deproteinized bovine bone or synthetic hydroxyapatite are 2 prevalent bone grafting materials used in the clinical treatment of peri-implant bone defects. However, the differences in bone formation among these materials remain unclear. This study evaluated osteogenesis kinetics in peri-implant defects using 2 types of deproteinized bovine bone (Bio-Oss® and Bio-Oss/Collagen®) and 2 types of synthetic hydroxyapatite (Apaceram-AX® and Refit®). We considered factors including newly generated bone volume; bone, osteoid, and material occupancy; and bone-to-implant contact. Methods: A beagle model with a mandibular defect was created by extracting the bilateral mandibular third and fourth premolars. Simultaneously, an implant was inserted into the defect, and the space between the implant and the surrounding bone walls was filled with Bio-Oss, Bio-Oss/Collagen, Apaceram-AX, Refit, or autologous bone. Micro-computed tomography and histological analyses were conducted at 3 and 6 months postoperatively (Refit and autologous bone were not included at the 6-month time point due to their rapid absorption). Results: All materials demonstrated excellent biocompatibility and osteoconductivity. At 3 months, Bio-Oss and Apaceram-AX exhibited significantly greater volumes of formation than the other materials, with Bio-Oss having a marginally higher amount. However, this outcome was reversed at 6 months, with no significant difference between the 2 materials at either time point. Apaceram-AX displayed notably slower bioresorption and the largest quantity of residual material at both time points. In contrast, Refit had significantly greater bioresorption, with complete resorption and rapid maturation involving cortical bone formation at the crest at 3 months, Refit demonstrated the highest mineralized tissue and osteoid occupancy after 3 months, albeit without statistical significance. Conclusions: Overall, the materials demonstrated varying post-implantation behaviors in vivo. Thus, in a clinical setting, both the properties of these materials and the specific conditions of the defects needing reinforcement should be considered to identify the most suitable material.

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF

방해석의 $Cd^{2+}$ 흡착현상에 대한 연구 (Sorption Studies of $Cd^{2+}$ on Calcite: Kinetics and Reversibility)

  • Yoon, Hyeon;Reeder, Richard J.
    • 한국광물학회지
    • /
    • 제15권2호
    • /
    • pp.104-113
    • /
    • 2002
  • 방해석 표면에 의한 C$d^{2+}$의 흡착연구를 하였다. 흡착실험에서 사용한 Cd의 농도는 $10^{-8}$ 로서 CdCO$_3$(s)의 침전농도 보다 낮은 농도를 유지하도록 조절하였다. NaClO$_4$를 전해질로 사용하여 이온농도를 달리 한 실험 결과 C$d^{2+}$의 흡착은 용액의 이온세기와는 무관한 것으로 나타났다. 이는 C$d^{2+}$의 방해석 표면 흡착이 특징적인 성질을 갖고 inner sphere surface complex를 형성한다는 것을 암시한다. 흡착반응은 초기의 매우 빠른 흡착시기와 후기의 지속적인 느린 흡착시기의 2단계로 구분되었다. 특히, 후기의 느린 흡착시기에는 약 145시간 경과 후 최대정상상태 (steady state maximum)에 도달하였다. 본 연구에서 사용한 C$d^{2+}$의 농도가 낮아 방해석 표면에 CdCO$_3$(s)의 침전 형성에 의한 반응은 고려되지 않았다. 방해석 표면으로부터 C$d^{2+}$의 탈착반응은 일정시간의 흡착 반응이 경과된 후 초기 흡착 실험 시와 같은 농도의 과포화 용액을 사용하여 C$d^{2+}$을 흡착한 방해석이 새로운 용액에 재 평형을 이루도록 반응을 유도하였다. 일반적으로 탈착실험에서는 새로운 과포화용액에 방해석을 넣자마자 매우 빠른 탈착반응을 보여준다. 그 이후는 2가지의 다른 경향성을 보여주며 새로운 평형에 도달하는 것으로 나타난다. 초기의 빠른 탈착반응 시기 뒤 느린 흡착반응이 지속적으로 일어나 일정 시간 경과 후 다시 평형을 이루거나, 느린 탈착반응이 계속적으로 지속되어 일정 시간 경과 후 새로운 평형을 이루는 2가지로 나타났다. 이러한 부분적으로 비가역적인 흡착 반응과 탈착반응은 실제 자연계에서 C$d^{2+}$의 유동성을 결정짓는 매우 중요한 인자로 작용할 것으로 생각된다. 흡착 반응 및 탈착반응의 평형상수 값은 이들 반응이 서로 동일한 기작에 의하여 조절됨을 보여주었다.

국내산 팥의 품종별 종실 및 수분흡수 특성 (Seed and water absorption characteristics of red bean cultivars in Korea)

  • 오선민;조영제;천아름;곽지은;오유근;김미정;송석보;최인덕
    • 한국식품과학회지
    • /
    • 제53권5호
    • /
    • pp.607-612
    • /
    • 2021
  • 본 연구에서는 국내산 팥 품종별 종실 특성과 수분흡수율 및 수분흡수 kinetics를 분석하였으며 수분흡수 속도와 팥의 종실 특성 변수들 간의 상관관계를 조사하였다. 팥의전체 종실의 길이는 품종간 유의적인 차이를 보였지만(7.74-8.99 mm), 전체 종실의 너비에는 유의적인 차이가 없었으며(5.33-5.54 mm), 배꼽의 경우 길이는 3.21-4.01 mm, 너비는 0.58-0.73 mm의 범위를 가졌다. 주사 전자 현미경을 통해 종피는 39.18-50.01 ㎛로 나타났다, 수침 동안 초기 수분함량이 <14%인 팥은 30시간에 도달함에 따라 모든 품종 팥에서 130% 이상 수분을 함유하고 있었으며 수침 초기에는 수분에 큰 변화가 없는 lag phase를 갖는 것으로 나타났다. 흰나래의 경우 다른 품종들에 비해 lag phase로 도달하는 시간이 빨랐으며 평형수분 함량의 50%까지 도달하는 시간인 τ (h)의 경우 모델식에 적용하여 도출할 수 있는데 이때, 흰나래가 4.40 h로 가장 빨랐고 다른 품종의 경우 도달시간이 9-10 h였다. 모델식으로부터 품종별 수분흡수 속도를 계산한 결과, 흰나래가 가장 빠르게 수분흡수가 이루어졌으며 검구슬, 연두채, 홍진, 아라리 순서로 나타났다. 수분흡수 속도와 종실 특성 지표와의 상관관계에서 수분흡수 속도는 전체 종실의 길이나 너비, 배꼽의 길이 보다는 배꼽의 너비(r=0.7858*)와 종피의 두께(r= -0.9954***)와 더 높은 상관성이 있어, 이 두가지가 팥의 수분흡수율에 영향을 주는 주요 요인임을 알 수 있다. 본 연구에서 흰나래는 가장 긴 배꼽 너비(0.73 mm)와 가장 얇은 종피(39.18 ㎛)를 가져 다른 품종들보다 눈에 띄는 수분흡수 속도를 보여 경제적이고 효율적인 품종으로서 산업적 적용을 기대할 수 있다. 또한, 본 연구를 통해 팥의 수분 거동은 S형 방정식에 모델링하는 것이 적절하며 모델링을 하여 수분거동을 예측함으로써 수분침지 시간과 수분흡수율을 제어하고 용도에 맞게 가공시스템을 설정할 수 있을 것으로 생각된다.

전기적 방출 조절 시스템을 이용한 광 페록사이드센서의 개발 (Signal Analysis of Optical Biosensor to Detect Peroxide Using Electrically Controlled Release System)

  • 민준홍;임인희;김효한;이상백;최정우;이원홍
    • 센서학회지
    • /
    • 제6권1호
    • /
    • pp.35-42
    • /
    • 1997
  • 전기적 제한 방출 시스템을 이용한 페록사이드 측정용 광바이오센서가 개발되었다. HPA를 포함한 PEOx와 PMAA의 고분자 복합체는 전류를 가하게 되면 붕괴되면서, HPA를 방출한다. 고분자 복합체의 붕괴 속도 및 방출되는 HPA의 양은 가해지는 전류의 세기에 비례했다. 페록사이드는 HPA와 페록시다아제효소에 의해 반응되어 형광 물질인 DBDA가 생성되었다. Xenon램프를 이용하여 DBDA를 여기시키고 발생되는 형광을 광섬유와 광다이오드어레이로 측정하였다. 측정된 DBDA의 형광의 변화는 페록사이드의 농도에 비례하였다. 페록시다아제 효소는 Ca-alginate를 이용하여 반응기내벽에 고정화시켰다. 개발된 광바이오센서는 페록사이드 0.025mM - 1.0mM 농도의 측정 범위를 가지며, 페록사이드의 단계 변화에 대한 반복성 있는 센서신호가 조사되었다. 효소 반응과 물질전달현상을 통하여 센서의 수학적 모델을 구성하였으며, 제안된 모델은 실험 결과와 잘 일치함을 알 수 있었다.

  • PDF

효소(酵素)·알칼리 증해(蒸解)의 탈(脱)리그닌에 관(関)한 동역학적(動力學的) 분석(分析) (The Kinetics of Delignification in Oxygen·Alkali pulping)

  • 조병묵;신동소
    • 한국산림과학회지
    • /
    • 제56권1호
    • /
    • pp.26-50
    • /
    • 1982
  • 본(本) 연구(硏究)에서는 효소(酵素) 알칼리 증해(蒸解)의 리그닌 용출거동(溶出挙動) 파악하기 위(爲)해 잣나무(Pinus koraiensis S. et Z.) 목분(木粉)을 공시(供試)하여 $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$, $140^{\circ}C$, 및 $150^{\circ}C$의 5 수준(水準) 온도(溫度)로 60분간(分間) 1단(段) 등온(等溫) 효소(酵素) 알칼리 탈(脱)리그닌 처리(処理)를 행(行)한 후(後), 그 탈(脱)리그닌 반응속도(反応速度), 활성화(活性化)에너지 및 반응시간별(反応時間別) 알칼리와 효소(酵素)의 소비동향(消費動向)을 동역학적(動力學的) 방법(方法)으로 구명(究明)하였다. 그 결과(結果)를 보면 탈(脱)리그닌은 반응초기(反応初期)에 전(全)리그닌 함량(含量)의 2/5가량이 급속(急速)히 용출(溶出)되는 초기(初期) 산화반응(酸化反応)을 나타냈다. 탈(脱)리그닌 반응(反応)의 속도상교(速度常敎)(K)는 반응온도(反応溫度) $150^{\circ}C$의 경우, 소오다법(法)에 비(比)해 3배정도(倍程度) 더 컸다. 본 법(法)의 활성화(活性化)에너지 값은 크라프트나 소오다 펄프법화(法化)보다 1/3정도(程度) 낮은 수준(水準)이었다. 알칼리소비량은 효소(酵素)의 경우와 마찬가지로 반응초기(反応初期)에 총투입량(總投入量)의 1/2가량이 급속히 소모된 후, 완만한 소비협추세(消費趨勢)를 보였다. 탈(脱)리그닌 반응속도(反応速度)는 증해과정중 생성되는 유기산(有機酸) 때문에 pH가 감소됨에 따라 크게 영향을 받았다. 또한 증해용출(蒸解溶出)된 리그닌은 잘 침전(沈澱)되지 않을 만큼 저분자화(低分子化) 됨을 알수 있었다. 리그닌의 메톡실기(基)는 급속히 감소(減少)되는데 반(反)해, 페놀성(性) 하이드록실기(基), 카보닐기(基) 및 카복실기(基)는 증가(增加)추세를 보였다.

  • PDF