• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.85-95
• /
• 2015

PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.775-780
• /
• 2003

The propose of this study is to discover concrete secondary products for proper mixing by lightweight concrete. The standard of water ratio 50% and weight substition 0%, 10%, 20% by Fly-ash. When produce manufactures, there use for maintain its form weight substition and addition among the viscosity agent each Silica-fume and Hydroxy propyl methyl cellulos. Testing method was to operate slump, air content, compressive strength test, rapid freezing and thawing test. The result of this study is appeared when substition Fly-ash generally it had better use Silica-fume.

• Archives of design research
• /
• v.11 no.1
• /
• pp.237-244
• /
• 1998

Rapid prototyping is an efficient method to evaluate the usability of electric home appliances. However, the use of rapid prototyping method in usability tests has not been sufficiently validated. The purpose of this study was to validate computer-generated prototypes whether they can replace real products in usability tests. The control-display panel of a refrigerator was selected for this study. Sixteen female subjects participated in a between-subjects experiment: Eight subjects of them used the real refrigerator while others used the computer-generated prototype of the refrigerator. The difference between the refrigerator and the prototype was analyzed in terms of task failure rate, task completion time, and the number of buttons pressed for three typical tasks: clock setting, selecting an operation mode for refrigerating room, and selecting an rapid freezing mode. The results of a non-parametric statistical test showed that the prototype was not significantly different from the real refrigerator. Therefore, the rapid prototyping technique can be applied to the usability tests for the simple electric home appliances such as the refrigerator.

• Clinical and Experimental Reproductive Medicine
• /
• v.31 no.1
• /
• pp.9-17
• /
• 2004

Objective: The aim of this study were to compare the effects of EG and PROH on cryopreservation of mouse and human embryos, and to find the optimal protocol for embryo freezing. Methods: Human embryos derived from fertilized eggs showing 3 pronuclei (PN) and mouse embryos were divided into two groups respectively: dehydrated with 1.5 M EG + 0.2 M sucrose or 1.5 M PROH + 0.2 M sucrose using the slow freezing method. Moreover mouse embryos were controlled the exposure time of cryoprotectant during dehydration or rehydration steps. Results: The survival rates of human embryos were 79.2% (84/106) in EG group and 77.9% (88/113) in PROH group. In mouse embryos, the survival and development rates up to blastocyst were 70.6% (245/347), 44.1% (123/279) in EG group and 62.1% (198/319), 45.1% (123/279) in PROH group, respectively. However, in EG group, partially damaged embryos after thawing were decreased compared to PROH group. In combination group, when the exposure time during dehydration and rehydration were reduced, the survival and embryonic developments were increased slightly, but not significant. Conclusion: Cryopreservation of mouse and human embryos at cleavage stage by using EG or PROH exhibited no statistical difference in the survival rate and/or developmental rate to blastocyst. However, the use of EG for cryopreservation of embryos might reduce the exposure time of the cryoprotectant because of a high permeation of EG and result in lessen its toxic effects.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.375-381
• /
• 2008

Various problems such as durability degradation may happen when extra water is added to concrete. Because of these reasons, the change of water content is managed by using rapid evaluation method of unit water content such as electric capacity method, heat drying method making use of micro wave, unit capacity mass method among various methods. Especially, in Japan, guidance for the change of water content ($\pm$ 10, 15, 20 kg/$m^3$ etc.) were regulated and used. However, it is the real situation that the guidance which were regulated in South Korea evaluate suitability only considering production and measurement error under the circumstances which are not considering the degree of durability degradation. Therefore, this study tries to investigate the influence of addition of extra water in the concrete on the durability degradation of concrete when it was added by artificial manipulation or by management error. From the test results, a guideline of the contents of extra water for the quality control is suggested with the consideration of the degree of durability degradation and the probable error resulted from the addition of extra water. The contents of extra water for tests are set as 0, 15, 25, 35 kg/$m^3$. To examine the durability degradation of concrete, freezing and thawing, carbonation, chloride penetration and compressive strength are tested.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.3
• /
• pp.41-49
• /
• 2015

The repair of manhole raise has been caused much construction times and disruption of traffic flow, serious environmental pollution from crushed construction wastes, and budget waste due to the repeated repair construction works. In order to overcome such problems, we have developed the new manhole repairing composite structures by using a glass fiber-reinforced polymer (GFRP) pipe, which can raise manhole to the regular height of the overlayed road pavement with rapid construction and minimum traffic jams. This environmental-friendly technology is method completed by the methyl methacrylate monomer (MMA) double wide flanged GFRP pipe composite structures in order to raise manhole to the regular height. In this paper, two kinds of the compressive strength tests of MMA mortar composites were conducted and evaluated by a general compressive strength test, and compressive strength test after freezing-thawing resistance test. It was found that this MMA mortar composites will be used for the application of the double wide flanged GFRP pipe composite structures.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.595-601
• /
• 2016

The insulation performance of the insulation currently used in building structures is reflected only during design based on initial performance and the reduction in heat insulation performance due to the degradation of long-term durability is not reflected. This study reviewed the degradation of heat insulation performance due to the durability degradation of insulating materials through the accelerated durability test. The study findings showed that the foamed polystyrene insulation bead method did not show performance degradation due to aging in the standard environmental condition and laboratory accelerated test condition but the performance is degraded in the freeze-thaw test condition. On the other hand, in the case of the extrusion method, the degradation of the heat insulation performance was less in the freeze-thaw test condition, but the rapid performance degradation was caused by the release of the internal gas at the beginning of aging. In addition, the hard polyurethane foam insulation showed better initial insulation performance than other insulation materials, but the performance was found to be degraded somewhat under laboratory accelerated test conditions and freeze-thaw test conditions.

• Korean Journal of Animal Reproduction
• /
• v.24 no.3
• /
• pp.225-230
• /
• 2000

This study was designed to investigate effect of cryoprotectant kinds and cell stages on the viability of bovine embryos cryopreserved by vitrification. The oocytes were collected from ovarian follicles of Korean native cows. The follicular oocytes were cultured in TCM-199 medium containing hormone and 10%(v/v) FCS for 24~48hrs in a incubator with 5% $CO_2$, in air at 38.5$^{\circ}C$ and then matured oocytes were again cultured for 7~10 hrs with spermatozoa capacitated by preincubation. The vitrification solutions of EFS and EDS were consisted of 40%(v/v) ethylene glycol, 18%(v/v) Ficoll and 0.3M sucrose, and 20%(v/v) ethylene glycol, 16.5%(v/v) DMSO and 0.5M sucrose in TCM-199 medium supplemented with 10% FCS, respectively. The embryos were exposed to EFS or EDS at $25^{\circ}C$ and loaded into OPP straw for 30 sec. The plug end of each straws was heat-sealed and straws was slowly immersed into liquid nitrogen(L$N_2$). The results obtained were summarized as follows : 1 . The rates of cleavage and hatching of embryos frozen with vitrification, rapid and slow freezing methods were 67.5%, 27.5% and 42.5%, 20.0% and 52.5%, 25.0%, respectively And rates of cleavage and hatching of embryos frozen with vitrification method were significantly(p<0.05) higher than those in other methods, and the rates were lower than those in control group(82.5% and 37.5%). 2. The rates of cleavage and hatching of embryos were significantly(p<0.05) different between EFS(47.5% and 22.5%) and EPS(52.5% and 27.5%), and the rates were lower than those in control group(82.5% and 37.5%). 3. After vitrification freezing of bovine embryos at zygote, 2 cell, 8 cell, morulae and blastocyst stage, the rate of cleavage and hatching were 25.0% and 15.0%, 32.5% and 20.0%, 37.5% and 20.0%, 52.5%, 27.5%, 47.5% and 25.0%, respectively. And developmental rates to the expended blastocyst stage of embryos frozen at zygote stage was significantly(p<0.05) lower rather than those in 2, 8-cell and morulae stage.

• Applied Microscopy
• /
• v.39 no.1
• /
• pp.65-72
• /
• 2009

Cryo-SEM which enables specimens to be observed in frozen form has been used to study liquid specimens in their native states. Cryo-methods, sample preparation for cryo-SEM, are quite complex and involve several discrete but vitally interconnected steps which are rapid cooling, fracturing, sectioning, etching and coating. It is important to select practical techniques and to optimize conditions of each steps considering analytic purpose and specimen characters, viz., sample dimension, water contents. In this study, etching methods and sample preparation before freezing had been studied for observation of cyanobacteria, Synechocystis sp. PCC 6803 using cryo-SEM and their cryo-SEM images were compared to Conventional SEM (CSEM) images treated by chemical fixation. We could observe the improved morphological images of the pili of the surface and membranes of Synechocystis sp. PCC 6803 and the three-dimensional architectures of their biofilm, which were difficult to observe using chemical fixation and CSEM. These results suggest that cryo-methods/cryo-SEM are useful techniques for morphological study of biological specimen.

• Clinical and Experimental Reproductive Medicine
• /
• v.36 no.4
• /
• pp.311-319
• /
• 2009

Objective: Human embryonic stem cells (hESCs) have the capacity to differentiate into all of the cell types and therefore hold promise for cell therapeutic applications. In order to utilize this important potential of hESCs, enhancement of currently used technologies for handling and manipulating the cells is required. The cryopreservation of hESC colonies was successfully performed using the vitrification and slow freezing-rapid thawing method. However, most of the hESC colonies were showed extremely spontaneous differentiation after freezing and thawing. In this study, we were performed to rapidly collect of early passage hESCs, which was thawed and had high rate of spontaneously differentiation of SNUhES11 cell line. Methods: Four days after plating, partially spontaneously differentiated parts of hESC colony were cut off using finely drawn-out dissecting pipette, which is mechanical separation method. Results: After separating of spontaneously differentiated cells, we observed that removed parts were recovered by undifferentiated cells. Furthermore, mechanical separation method was more efficient for hESCs expansion after thawing when we repeated this method. The recovery rate after removing differentiated parts of hESC colonies were 55.0%, 74.5%, and 71.1% when we have applied this method to three passages. Conclusion: Mechanical separation method is highly effective for rapidly collecting and large volumes of undifferentiated cells after thawing of cryopreserved early passage hESCs.