• 전자통신동향분석
• /
• 제38권3호
• /
• pp.1-10
• /
• 2023

In this study, the status of global advanced air mobility (AAM) was investigated to derive information and communications technologies (ICTs) that should be prepared according to directions of domestic AAM development. AAM is an urban air traffic system for moving from city to city by electric vertical take-off and landing or personal aircraft. It is expected to establish a three-dimensional air traffic system that can solve ground traffic congestion caused by the rapid global urbanization. With the full-scale commercialization of AAM solutions, high-density air traffic is expected, and with the advent of the personal air vehicle (PAV), the flight space usage is expected to expand. Therefore, it is necessary to develop a safe AAM service through early research on core ICTs for autonomous flight.

• 기술혁신연구
• /
• 제3권1호
• /
• pp.1-34
• /
• 1995

Since 1982, the government of Korea has actively promoted vertical cooperative R&D programs between government-sponsored research institutes (GRIs) and private firms. A number of firms participated in the programs because cooperative R&D could lower the risk and could contribute to rapid commercialization of many technologies. This paper examines the effectiveness of vertical cooperative R&D projects by the modes of cooperation between GRIs and industrial firms, and analyzes the performance of participating firms' technology sourcing strategies for commercial utilization of cooperative R&D results at the project performed from 1982 to 1989 under the Government-Industry Cooperative R&D Program sponsored by the Ministry of Science and Technology(MOST) in Korea. The cooperative R&D projects are classified into 4 groups by two criteria, i.e., the level of participation of firms, and the breadth of cooperation. The findings suggest that firms should actively participate in cooperative R&D projects. In addition, in order to enhance commercial success, cooperation between GRIs and industrial firms should not be limited to R&D stage only. The breadth of cooperation should be extended to commercialization stage. Small- and medium-sized firms participating in vertical cooperative R&D projects in Korea usually lack internal technological capabilities that are needed to commercialize the results of cooperative R&D. Three different technology sourcing strategies - exclusive cooperative R&D strategy, in-house development augmented cooperative R&D strategy, and licensing-in supplemented cooperative R&D strategy - are empirically derived through cluster analysis of the relative usage rates cooperative R&D and of other supplementary technology acquisition methods. The findings suggest that the firms participating in vertical cooperative R&D projects should try to utilize other supplementary technology acquisition methods in order to achieve commercial utilization of the vertical cooperative R&D results.

• 한국콘텐츠학회논문지
• /
• 제21권12호
• /
• pp.918-925
• /
• 2021

페로브스카이트 태양전지는 기존의 실리콘 태양전지를 대체하는 차세대 태양전지로서, 페로브스카이트 구조를 가진 유-무기 하이브리드 물질을 광 활성층으로 사용하는 태양전지 소자로 고효율, 저가의 용액 공정 및 저온 공정에 유리한 장점들을 가지고 있으며 지난 10년간 빠른 효율 향상을 보여주었다. 이러한 페로브스카이트 태양전지의 상용화 과정에서 대면적 코팅 방법에 대해서 연구개발이 진행되어야 한다. 대면적 페로브스카이트 태양전지 대면적 코팅 방법 중 하나로 슬롯-다이 코팅방법에 대해서 연구 진행하였다. 메니스커스를 이용하여 기판 위를 지나가며 용액을 코팅하는 방법으로 3D printer에 메니스커스를 장착하여 코팅을 할 수 있도록 하였다. 코팅 시 작용하는 변수로는 bed 온도, coating speed, N₂ blowing간격, N₂ blowing 높이, N₂ blowing세기등이 있으며 이를 조절하여 페로브스카이트 흡수층을 제작 진행하였으며, 대면적 소자 제작을 위한 코팅 조건을 최적화 하였다.

• 항공우주정책ㆍ법학회지
• /
• 제32권1호
• /
• pp.385-417
• /
• 2017

Insurances of space activities are divided into satellite insurance, astronaut insurance and third party liability insurance. Against the background of the rapid development of space commercialization, especially the increasing participation of private entities in space affairs, the present international and domestic mechanisms of space insurance are challenged. As a space-faring state which is in the process of developing space businesses, the regulations of space insurance in China are deserved to be discussed. Satellites insurance is at present well-developed, the "pre-launch", "launch" and "in-orbit" phases of satellites are all possible to be insured by related companies. China created the CAIA in 1997 to provide insurance for Chinese satellites. However, with more private entities start to involve in space as well as satellite industry, the regime established under the framework of CAIA is necessary to be modified, and the mechanism relating to space insurance brokers should be promoted. The astronauts are recognized as the envoy of humankind, and relevant international regulations are made to provide assistance to them in emergency circumstances. From the domestic perspective, astronauts will be fully insured. China creates a particular type of insurance for astronauts. However, once space tourism becomes a business, the insurance of the tourist will be demanded to be created. In order to promote China's space tourism, it is recommended to take the "Astronaut Group Insurance" as an optional model to space tourists, if the tourists are customers of a governmental-owned space company. Once private involvement of providing orbital/suborbital tourism service becomes a reality, new rules are required. Getting a third party liability insurance is deemed as an indispensable precondition for an applicant to get a launch permission. Domestic space laws will include provisions for the third party liability insurance. China's "Interim Measures" of 2002 realizes the importance of third party liability insurance and requires the permit holder to get it before entering the launching site. This regulation is different from the practices of other states. Concerning that China is the sponsor of APSCO, for the purpose of promoting commercial space cooperation, a harmonized approach to domestic law is recommended to be found.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.652-652
• /
• 2013

The conventional thermal chemical vapor deposition (CVD) setup for the graphene synthesis has mainly used convective heat transfer in order to heat a catalyst (e.g. Cu) up to $1,000^{\circ}C$. Although the conventional CVD has been so far widely accepted as the most appropriate candidate enabling mass-production of high-quality graphene, this method has stillremained under the standard for the commercialization largely due to the poor productivity arisen out of the required long processing time. Here, we introduced a fast and efficient synthetic route toward CVD-graphene. Unlike the conventional CVD using convection heat transfer, we adopted a CVD setup utilizing conduction heat transfer between Cu catalyst and rapid heating source. The high thermal conductive nature of Cu and the employed rapid heating source led to the remarkable reduction in processing timeas compared to the conventional convection based CVD (Fig. 1A), moreover, the synthesized graphene was turned out to have comparable quality to that synthesized by the conventional CVD (Fig. 1B). For the optimization of the conduction based CVD process, the parametric studies were thoroughly performed using through Raman spectroscopy and electrical sheet resistance measurement. Our approach is thought to be worth considerable in order to enhance productivity of the CVD graphene in the industry.

• 대한임상검사과학회지
• /
• 제53권3호
• /
• pp.257-265
• /
• 2021

코로나바이러스감염증-19는 사람의 호흡기관에 다수로 분포하는 안지오텐신전환효소2, angiotensin converting enzyme 2 (ACE2)를 매개하여 감염을 일으키는 β-genus 바이러스이고 완치환자 및 백신 접종자의 항체생성에 대한 효율적인 사후관리가 필요한 질병을 유발하는 바이러스다. 이 논문에서는 임상 시료의 중화항체와 특이적으로 반응하는 재조합 단백질을 개발하고 이를 이용하여 COVID-19 바이러스에 대한 중화항체를 빠르고 편리하게 진단하는 신속 진단 키트를 개발하고 그것의 성능 평가를 통하여 제품화 가능성을 확인하는 것을 목표로 하였다. COVID-19 S1 RBD 재조합 단백질을 사용한 신속 진단 키트의 양성 퍼센트 일치(PPA) 및 음성 퍼센트 일치(NPA)가 미국 FDA EUA에서 승인한 ELISA 키트와 비교했을 때 각각 100% 및 98.3%인 점에서 신속 진단 키트에 적용할 수 있을 것으로 확인하였다. 향후 신속 진단 키트의 성능을 개선하고 정량 분석 장비를 통해 중화항체를 정량적으로 분석이 가능하면 제품화 통해 검체내의 중화항체 유무와 양을 확인함으로써 COVID-19 바이러스에 대한 면역성을 예측하고 추가 예방접종 여부를 판단하는 중요한 자료로 활용될 수 있을 것으로 생각한다.

• Journal of Forest and Environmental Science
• /
• 제25권2호
• /
• pp.85-91
• /
• 2009

About 83% of the total population of Lao PDR lives in rural areas. People living near forest are highly dependent on the forest resources closed to their villages. Especially non-timber forest products (NTFPs) provide a wide range of subsistence needs and are the main source of their cash income. They also make a significant contribution to the country economy. The annual export value of NTFPs is considerably high. 708 edible NTFP species (238 edible plants and 470 animals) have been recorded so far, and about 400 plants have been reported and used as medicinal plants by Lao people. One hundred NTFP species are considered as commercial forest products. The striking trend in NTFP resources is the decline of some commercial species due to increased demand on them for commercialization, and the loss of forest by rapid population growth. To sustainablely manage the NTFPs resources, a number of new management systems are under development and support in progress by the government.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.264-270
• /
• 2014

Fuel cell technology is the most representative area of alternative energy field on vehicle industry according to the limitation of petroleum resources. In recent years, the technology of fuel cell vehicles has made rapid progress, Hyundai Motor Company (HMC) reached to mass production of the Tucson ix hydrogen fuel cell vehicles first in the world. In addition, HMC is accelerating the development of hydrogen fuel cell buses, which have a number of advantages for hydrogen infrastructure and mass transport personnel. In this study, we examined potential of the commercialization through the demonstration of hydrogen fuel cell buses. As a result, we identified that the mass-production possibility of FCB has high potential and HMC's technology will lead to fuel cell bus industry.

• 한국콘텐츠학회논문지
• /
• 제6권11호
• /
• pp.38-44
• /
• 2006

인터넷의 보급과 함께 엄청나게 성장하고 있는 디지털 콘텐츠 산업은 웹정보콘텐츠 뿐만 아니라 게임, 애니메이션, 디지털 영상, 이러닝 등 다양한 형태로 발전하고 있다. 국가 성장엔진의 하나로서 디지털콘텐츠가 차지하는 비중을 미루어 보건데 사업성을 전제한 관련기술과 핵심요소들의 정확한 개발 방향에 대한 결정이 매우 중요하다. 본 논문에서는 10대 성장동력 산업의 하나인 디지털콘텐츠 세부 분야별 사업 유망성에 대한 평가를 통해 관련분야의 기술개발 및 사업화에 관심을 갖는 산 학 연 주체들의 사업전략에 실질적인 도움을 주고자 했다. 사업 유망성 비교분석의 틀로써 SRIC-BI의 차세대 성장산업과 제품들을 선정하기 위한 7단계의 프로세스 가운데 산업과 사업영역의 평가가 가능하도록 외적요인 평가프로세스를 보정한 BOE 프로세스를 제안하고, 이를 디지털콘텐츠 세부산업 평가에 활용하였다.

• 대한전자공학회논문지TC
• /
• 제48권7호
• /
• pp.41-47
• /
• 2011

최근 인터넷의 급속한 발달과 스마트폰의 부각으로 인해서 디지털 콘텐츠의 활용이 증가되고 있으나 다양한 공격으로 지적 재산권을 침해할 수 있다. 디지털 콘텐츠의 공모공격에 대처하기 위한 대표적인 핑거프린팅 기술인 BIBD AND-ACC 방식은 매트릭스 연산의 복잡성으로 많은 사용자가 사용하기에는 연산문제가 발생한다. 따라서 본 논문에서는 BIBD 이론을 기반으로 한 공모보안 코드를 생성하여 다수의 콘텐츠 구매자에게 분배 가능한 삽입 기법을 제안한다. 제안한 기법은 컴퓨터 시뮬레이션을 통해 증폭계수 ${\alpha}$가 1일때 PSNR이 50.84dB로 실제 사용에 문제가 없는 화질임을 확인하였고 공모공격에 가담한 공모자 추출이 가능함을 실험을 통해 확인하였다.