• Korean Journal of Microbiology
• /
• v.43 no.4
• /
• pp.264-272
• /
• 2007

For the detection of human immunodeficiency virus (HIV), ultra-rapid real-time PCR methods were developed. The target DNA sequences were used 495 bp HIV-1-specific env gene (gi_1184090) and 294 bp HIV-2-specific env gene (gi_1332355). Ultra-rapid real-time PCR was peformed by $Genspector^{TM}$ (Samsung, Korea) using microchip-based, $6\;{\mu}l$ of reaction volume with extremely short running time in only 2 steps (denaturation, annealing/extension) in each cycle of PCR. Total reaction for 30 cycled ultra-rapid PCR detection including melting temperature analysis was completed in 7 min and 30 sec. The HIV-1-specific 117 bp-long or HIV-2-spe-cific 119 bp-long PCR products were successfully amplified from the minimum of template, $2.3{\times}10^3$ copies of each euv gene using 30 cycled two-steps ultra-rapid PCR. This kind of ultra-rapid real-time PCR method would be useful not only for the rapid-detection of HIV, but also rapid-detection of other pathogens.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.138-144
• /
• 2016

Purpose: Phosphorus is an essential element for water quality control. Excessive amounts of phosphorus causes algal bloom in water, which leads to eutrophication and a decline in water quality. It is necessary to maintain the optimum amount of phosphorus present. During the last decades, various studies have been conducted to determine phosphorus content in water. In this study, we present a comprehensive overview of colorimetric, electrochemical, fluorescence, microfluidic, and remote sensing technologies for the measurement of phosphorus in water, along with their working principles and limitations. Results: The colorimetric techniques determine the concentration of phosphorus through the use of color-generating reagents. This is specific to a single chemical species and inexpensive to use. The electrochemical techniques operate by using a reaction of the analyte of interest to generate an electrical signal that is proportional to the sample analyte concentration. They show a good linear output, good repeatability, and a high detection capacity. The fluorescence technique is a kind of spectroscopic analysis method. The particles in the sample are excited by irradiation at a specific wavelength, emitting radiation of a different wavelength. It is possible to use this for quantitative and qualitative analysis of the target analyte. The microfluidic techniques incorporate several features to control chemical reactions in a micro device of low sample volume and reagent consumption. They are cheap and rapid methods for the detection of phosphorus in water. The remote sensing technique analyzes the sample for the target analyte using an optical technique, but without direct contact. It can cover a wider area than the other techniques mentioned in this review. Conclusion: It is concluded that the sensing technologies reviewed in this study are promising for rapid detection of phosphorus in water. The measurement range and sensitivity of the sensors have been greatly improved recently.

• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.421-425
• /
• 2012

The objective of this study was to improve the detection limit of rapid detection kit for Salmonella Typhimurium by image analysis system. The rapid detection kit was comprised of four elements: sample pad, conjugate pad, nitrocellulose pad and absorbent pad. Gold nanoparticle and Salmonella antibody were used as a tag and a receptor. Salmonella antibody and goat rabbit IgG antibody were used as test and control lines on nitrocellulose membrane. The color intensity of test line began to increase from $10^5CFU/mL$ of Salmonella sample. A multiple linear regression analysis was employed to explain the relationship between predicted and measured number of Salmonella cells. The developed model could successfully predict the cell number of Salmonella with validation against extra-experimental result.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.26-34
• /
• 2006

The thermo-mechanical analysis and test were performed for plate structure under mechanical and thermal loading conditions. Infrared heating system and hydraulic loading system were used to simulate mechanical and thermal environment for the plate structure which is similar to the fin of the airframe. Also, FEM analysis using plastic option was added to evaluate thermo-mechanical behavior. Thermo-mechanical tests were conducted at elevated temperature and rapid heating(10℃/sec) condition with external loading together. To investigate the effect of heating environment, the strength at room temperature was compared with that of elevated temperature and rapid heating condition. A methodology for test and analysis for supersonic vehicle subjected to aerodynamic loading and heating was generated through the study. These experimental and analysis results can be used for designing thermal resistance structures of the supersonic vehicle.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.354-361
• /
• 1996

Near Infrared Reflectance Spectroscopy(NIRS) is accepted as today's most versatile method for rapid chemical analysis. The technique offers rapid multicomponent analysis. This study was conducted to improve the efficiency of quality analysis in covered barley grain, and to search for the effects of chemical components variation in covered barley grain on NIRS. Among the three groups with different range in the contents, each equation for starch contents increased standard error of prediction(SEP) and increased correlation coefficient from 0.872 to 0.883. According as, $\beta$-glucan and protein contents decreased SEP and increased correlation coefficient by expanded chemical components variation. Effective equation for ash contents analysis was obtained from group 3. Among the covered barley chemical components, starch and ash contents were required to conduct futher studies in term of accuracy and variation of contents. It was concluded that NIRS method would be applicable for the rapid determination of $\beta$-glucan and protein contents in covered barley grains.

• Transactions of Materials Processing
• /
• v.22 no.3
• /
• pp.123-132
• /
• 2013

Hot stamping, which is the hot pressing of special steel sheet using a cold die, can combine ease of shaping with high strength mechanical properties due to the hardening effect of rapid quenching. In this paper, a thermo-mechanical analysis of hot stamping using the finite element method in conjunction with phase transformations was performed in order to investigate the plastic deformation behavior, temperature history, and mechanical properties of the stamped car part. We also conducted a fully coupled thermo-mechanical analysis during the stamping and rapid quenching process to obtain the mechanical properties with the consideration of the effects of plastic deformation and phase transformation on the temperature histories at each point in the part. The finite element analysis could provide key information concerning the temperature histories and the sheet mechanical properties when the phase transformation is properly considered. Such an analysis can also be used to determine the effect of cyclic cooling on the tooling.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.165-171
• /
• 2018

In this study, to analyze the detection of limit for sensitivity of the influenza rapid antigen test kit, the positive detection of limits were analyzed by serial dilution of influenza virus A and B type for five influenza rapid antigen test kits in Korea. As a result of analysis, visual measurement of type A were up to 1:8192 for the Wellsbio product and up to 1:4096 for the II product, up to 1:512 for the I and III products, and only 1:128 for the IV product, and type B were positive for up to 1:8192 for the Wellsbio product, up to 1: 4096 for the II product and up to 1:1024 for the I, III and IV products. For instrument readings with the same specimen, both A and B types were found to be positive for up to 1:8192 for the Wellsbio product, up to 1: 4096 for the II product, and up to 1:2048 for the I product. The sensitivity of the rapid antigen test for influenza differs greatly depending on the sampling area of the patient, infection period, specimen volume, etc. Therefore, it is necessary to observe exactly the collection timing and method of the specimen. And it is necessary further study to improve the sensitivity for influenza rapid antigen test.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.3-8
• /
• 1975

Hydration processes of the rapid hardening cement clinkers, which were synthesized from domestic alunite for major alumina source, limestone, kaolin and fluorite, were investigated by means of x-ray diffraction analysis, thermal analysis and microscopic observation etc. The clinkers were composed mainly of alite, calcium fluroaluminate (C11A7.CaF2) minerals. While the hydratio processes of the clinkers are altered by concentration of SO3 in the paste, calcium aluminate hydrates such as C4AH13, CAH10 and calcium monosulfate hydrate (C3A.CaSO4.12H2O) are formed at first and then some of them are transformed into ettringite(C3A.3CaSO4.32H2O) within 30~60 min. when the concentration of SO3 in the paste are enough. However the formed ettringite are changed slowly into calcium monosulfate hydrate as the concentration of SO3 become lowered, and the paste is hardened with these close-packed minerals. When the content of SO3 in clinker is so enough, calcium sulfoaluminate hydrates are found without any addition of anhydrite or hemi-hydrite.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.1
• /
• pp.92-99
• /
• 1997

Nowadays, Electronic Speckle Pattern Interferometry is a well-established measuring technique with a wide range of industrial applications, particularly in the fields of deformation measurement and vibration analysis. Comparing with holographic interferometry, it has some attractive features, which are rapid recording and reconstruction, satisfiable automation etc. The Time-Average ESPI is used to provide vibration mode shape of an object whose vibration amplitude is given as a fringe pattern. Its merit is rapid and simple measurement for vibrating object. However, it is not possible to determine the direction of motions of a point on the object at any given time, because it does not give any information about the phase of vibration. But, Stroboscopic ESPI can measure the amplitude and phase of vibrating surface. In this paper, loudspeakers were tested by these two methods. As a result, we can assume that these techniques will be applied directly in the loudspeaker industry.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1688-1689
• /
• 2011

A simple and rapid capillary electrophoresis method was developed for the quantitative analysis of common triazine herbicides. Cyclic voltammetry was employed to clarify the detection voltage which showed characteristic irreversible cathodic peaks. For the analysis, the mixture of triazine herbicides was applied in a microfluidic chip to determine the CE-separated peaks. Soil sample extracts were analyzed directly after drying and redissolution with the supporting electrolyte but without other pretreatment. The results were comparable to those obtained by HPLC with UV detection. Therefore, this method can be used in the rapid determination of pesticide/herbicide residues.