• 제목/요약/키워드: Rapid Removal

검색결과 409건 처리시간 0.029초

산소플라즈마와 급속열처리에 의해 제조된 티타니아 박막의 휴믹산 제거 (Removal of Humic Acid Using Titania Film with Oxygen Plasma and Rapid Thermal Annealing)

  • 장준원;박재우
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제12권3호
    • /
    • pp.29-35
    • /
    • 2007
  • 본 연구에서는 산소플라즈마로 티타늄을 산화하고 급속열처리하여 티타니아 광촉매 박막을 제조하고 휴믹산 제거실험을 수행하였다. 플라즈마 화학기상증착장치에서의 산소플라즈마는 티타늄 표면을 산화시킴으로써 광촉매 피막을 생성하게 된다. 증착조건에서 RF power는 최대 500 W 이하에서 100 W, 150 W, 300 W, 처리시간은 5분, 10분에서 조절되었다. 박막의 특성은 XPS와 XRD로 측정하였다. 실험으로서 우리는 박막이 높은 성능을 나타내는 최적을 조건을 찾았다. 또한 제조된 박막의 경우 기존 Thermal spray Titania film에 비해 2배정도 우수하였고 분말만큼 광촉매 성능을 갖는다.

Application of computer vision for rapid measurement of seed germination

  • Tran, Quoc Huy;Wakholi, Collins;Cho, Byoung-Kwan
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2017년도 춘계공동학술대회
    • /
    • pp.154-154
    • /
    • 2017
  • Root is an important organ of plant that typically lies below the surface of the soil. Root surface determines the ability of plants to absorb nutrient and water from the surrounding soil. This study describes an application of image processing and computer vision which was implemented for rapid measurement of seed germination such as root length, surface area, average diameter, branching points of roots. A CCD camera was used to obtain RGB image of seed germination which have been planted by wet paper in a humidity chamber. Temperature was controlled at approximately 250C and 90% relative humidity. Pre-processing techniques such as color space, binarized image by customized threshold, removal noise, dilation, skeleton method were applied to the obtained images for root segmentation. The various morphological parameters of roots were estimated from a root skeleton image with the accuracy of 95% and the speed of within 10 seconds. These results demonstrated the high potential of computer vision technique for the measurement of seed germination.

  • PDF

Fabrication of a polymerase chain reaction micro-reactor using infrared heating

  • Im, Ki-Sik;Eun, Duk-Soo;Kong, Seong-Ho;Shin, Jang-Kyoo;Lee, Jong-Hyun
    • 센서학회지
    • /
    • 제14권5호
    • /
    • pp.337-342
    • /
    • 2005
  • A silicon-based micro-reactor to amplify small amount of deoxyribonucleic acid (DNA) has been fabricated using micro-electro-mechanical systems (MEMS) technology. Polymerase chain reaction (PCR) of DNA requires a precise and rapid temperature control. A Pt sensor is integrated directly in the chamber for real-time temperature measurement and an infrared lamp is used as external heating source for non-contact and rapid heating. In addition to the real-time temperature sensing, PCR needs a rapid thermocycling for effective PCR. For a fast thermal response, the thermal mass of the reactor chamber is minimized by removal of bulk silicon volume around the reactor using double-side KOH etching. The transparent optical property of silicon in the infrared wavelength range provides an efficient absorption of thermal energy into the reacting sample without being absorbed by silicon reactor chamber. It is confirmed that the fabricated micro-reactor could be heated up in less than 30 sec to the denaturation temperature by the external infrared lamp and cooled down in 30 sec to the annealing temperature by passive cooling.

Electro-osmosis에 의한 Dehydration (Dehydration by Electro-osmosis on Ceramic Body)

  • 한상목
    • 산업기술연구
    • /
    • 제4권
    • /
    • pp.43-46
    • /
    • 1984
  • In process of water removing safely from plastic clay, an electric field applied to a wet, porous solid such as day usually causes the rapid dehydration. The water-bearing positive ions move to negative electrode under the d. c. electrical stress or field. Therefore application of electro-osmosis to wet clay could include drying thick and large-scale ceramic body quickly and evenly. The d. c. power supply unit to 60 volts is necessary for safe practice. Also wider contact area and shorter distance between electrodes accelerate effectively the removal of water.

  • PDF

PASS-100을 이용한 응집처리시 물리.화학적 인자의 영향 (Effect of Physicochemical Parameter on PASS-100 Flocculation)

  • 이상일;서인석;박승국
    • 환경위생공학
    • /
    • 제10권2호
    • /
    • pp.30-35
    • /
    • 1995
  • In this research effect of physicochemical parameter on flocculation using PASS-100 were evaluated. pEt flocculant dosage, mixing intensity and detention time were adopted as experimental variables. The physicochemical parameter( p% mixing intensity and mixing time ) were important Parameter on flocculation performance. Effluent pH range for effective flocculation was 4.5-7. Optimum Gt$_{d}$ range was 20,000-30,000 and its range similar to alum flucculation. Rapid mixing was very important parameter to floe formation in PASS- 100 flocculation. Whereas, slow mixing did not affect to the removal efficiency at settling time for 30minute or more.

  • PDF

고농도 암모니아를 함유한 전자 폐수의 암모니아 탈기 실증 연구 (Demonstration Study on Ammonia Stripping in Electronic Industry Wastewater with High Concentrations of Ammonia Nitrogen)

  • 손재현;김영희
    • 청정기술
    • /
    • 제29권4호
    • /
    • pp.297-304
    • /
    • 2023
  • 첨단 전자 제품 산업의 비약적인 발전은 환경적 측면에서 고농도 암모니아 폐수의 증가를 초래했다. 고농도 암모니아 폐수를 안정적으로 처리하기 위해 다양한 방법의 기술이 시도되고 있으나, 지금까지 성공적인 기술이 개발되어 적용되지는 못하고 있다. 본 연구에서는 첨단 전자산업에서 발생하는 고농도 암모니아 함유 폐수에 대하여 밀폐(closed) 순환형 대향류 충전탑 형식의 실증설비를 이용하여 온도, 공기부하율 그리고 폐수부하율 변화에 따른 암모니아성 질소의 제거효율과 제거 특성을 평가하였다. 폐수량 20.8 m3 h-1, 공기량 18,000 Nm3 h-1의 운전 조건에서 온도를 45, 50, 55 그리고 60℃로 변경하여 운전한 결과, 암모니아성 질소(NH3-N)의 제거율은 각각 87.5, 93.4, 96.8 및 98.7%로 온도가 제거율에 미치는 가장 큰 영향 인자임을 알 수 있었다. 공기부하율을 증가시키면 제거율도 증가하나, 흡수탑의 액적(droplet)이 탈기탑으로 유입되어 제거율 증가는 크지 않았다. 폐수 부하율이 변경되어도 제거율은 크게 변하지 않았는데, 이는 제거율에 영향이 없는 것이 아니라, 상대적으로 높은 공기부하율에 기인한 것으로 판단된다. 실증연구를 통해 암모니아 탈기법은 첨단 전자산업에서 발생하는 고농도 암모니아 폐수를 안정적으로 처리할 수 있는 적정한 공법임을 확인할 수 있었다.

DGGE 기법을 이용한 생물활성탄 공정의 부착 박테리아 군집분석 (Analysis of Attached Bacterial Communities of Biological Activated Carbon Process Using DGGE Method)

  • 손희종;최진택;손형식;이상준
    • 대한환경공학회지
    • /
    • 제34권8호
    • /
    • pp.533-540
    • /
    • 2012
  • BAC 공정 운전초기부터 부착 박테리아들의 생체량이 정상상태(steady-state)에 도달한 이후까지 $BDOC_{total/rapid/slow}$ 제거율의 변화와 DGGE와 ATP 분석을 통하여 부착 박테리아들의 군집과 생체량을 평가하였다. 용존 유기물질 제거율 평가에 따른 BAC 공정의 정상상태 도달 여부 평가결과를 보면 DOC의 경우 운전 bed volume 27,500 부근에서 BAC 공정이 정상상태에 도달하였고, $BDOC_{rapid}$$BDOC_{total/slow}$의 경우는 각각 운전 bed volume 15,000 부근과 32,000 부근에서 정상상태에 도달하였다. BAC 공정의 운전기간 증가에 따른 HPC 및 ATP 농도 분석을 통한 부착 박테리아들의 생체량 평가결과 bed volume 22,500 이후로 거의 일정한 생체량을 유지하였으며, 이 때 HPC와 ATP 농도는 각각 $3.3{\times}10^8$ cells/g 및 $2.14{\mu}g/g$ 정도로 나타났다. DGGE를 이용하여 운전기간 증가에 따른 BAC 부착 박테리아들의 군집분석 결과 운전초기(bed volume 8,916)의 경우 분석가능한 DGGE band 개수가 5개였으나 운전기간 증가에 따라 분석가능한 DGGE band 개수는 최대 11개로 증가하였다. 또한, DGGE를 이용한 박테리아 군집분석 결과 BAC 운전기간의 증가에 따라 다양한 박테리아 그룹들이 존재하였고, Pseudomonas fluorescens, Acinetobacteria와 유사한 uncultured bacterium, uncultured Novosphingobium sp. 및 Flavobacterium frigidarium은 운전초기 단계부터 지속적으로 부착 박테리아 군집을 형성하였고, 전체적으로 Proteobacteria 그룹이 비교적 높은 비율로 우점하였다.

Field Studios of In-situ Aerobic Cometabolism of Chlorinated Aliphatic Hydrocarbons

  • Semprini, Lewts
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
    • /
    • pp.3-4
    • /
    • 2004
  • Results will be presented from two field studies that evaluated the in-situ treatment of chlorinated aliphatic hydrocarbons (CAHs) using aerobic cometabolism. In the first study, a cometabolic air sparging (CAS) demonstration was conducted at McClellan Air Force Base (AFB), California, to treat chlorinated aliphatic hydrocarbons (CAHs) in groundwater using propane as the cometabolic substrate. A propane-biostimulated zone was sparged with a propane/air mixture and a control zone was sparged with air alone. Propane-utilizers were effectively stimulated in the saturated zone with repeated intermediate sparging of propane and air. Propane delivery, however, was not uniform, with propane mainly observed in down-gradient observation wells. Trichloroethene (TCE), cis-1, 2-dichloroethene (c-DCE), and dissolved oxygen (DO) concentration levels decreased in proportion with propane usage, with c-DCE decreasing more rapidly than TCE. The more rapid removal of c-DCE indicated biotransformation and not just physical removal by stripping. Propane utilization rates and rates of CAH removal slowed after three to four months of repeated propane additions, which coincided with tile depletion of nitrogen (as nitrate). Ammonia was then added to the propane/air mixture as a nitrogen source. After a six-month period between propane additions, rapid propane-utilization was observed. Nitrate was present due to groundwater flow into the treatment zone and/or by the oxidation of tile previously injected ammonia. In the propane-stimulated zone, c-DCE concentrations decreased below tile detection limit (1 $\mu$g/L), and TCE concentrations ranged from less than 5 $\mu$g/L to 30 $\mu$g/L, representing removals of 90 to 97%. In the air sparged control zone, TCE was removed at only two monitoring locations nearest the sparge-well, to concentrations of 15 $\mu$g/L and 60 $\mu$g/L. The responses indicate that stripping as well as biological treatment were responsible for the removal of contaminants in the biostimulated zone, with biostimulation enhancing removals to lower contaminant levels. As part of that study bacterial population shifts that occurred in the groundwater during CAS and air sparging control were evaluated by length heterogeneity polymerase chain reaction (LH-PCR) fragment analysis. The results showed that an organism(5) that had a fragment size of 385 base pairs (385 bp) was positively correlated with propane removal rates. The 385 bp fragment consisted of up to 83% of the total fragments in the analysis when propane removal rates peaked. A 16S rRNA clone library made from the bacteria sampled in propane sparged groundwater included clones of a TM7 division bacterium that had a 385bp LH-PCR fragment; no other bacterial species with this fragment size were detected. Both propane removal rates and the 385bp LH-PCR fragment decreased as nitrate levels in the groundwater decreased. In the second study the potential for bioaugmentation of a butane culture was evaluated in a series of field tests conducted at the Moffett Field Air Station in California. A butane-utilizing mixed culture that was effective in transforming 1, 1-dichloroethene (1, 1-DCE), 1, 1, 1-trichloroethane (1, 1, 1-TCA), and 1, 1-dichloroethane (1, 1-DCA) was added to the saturated zone at the test site. This mixture of contaminants was evaluated since they are often present as together as the result of 1, 1, 1-TCA contamination and the abiotic and biotic transformation of 1, 1, 1-TCA to 1, 1-DCE and 1, 1-DCA. Model simulations were performed prior to the initiation of the field study. The simulations were performed with a transport code that included processes for in-situ cometabolism, including microbial growth and decay, substrate and oxygen utilization, and the cometabolism of dual contaminants (1, 1-DCE and 1, 1, 1-TCA). Based on the results of detailed kinetic studies with the culture, cometabolic transformation kinetics were incorporated that butane mixed-inhibition on 1, 1-DCE and 1, 1, 1-TCA transformation, and competitive inhibition of 1, 1-DCE and 1, 1, 1-TCA on butane utilization. A transformation capacity term was also included in the model formation that results in cell loss due to contaminant transformation. Parameters for the model simulations were determined independently in kinetic studies with the butane-utilizing culture and through batch microcosm tests with groundwater and aquifer solids from the field test zone with the butane-utilizing culture added. In microcosm tests, the model simulated well the repetitive utilization of butane and cometabolism of 1.1, 1-TCA and 1, 1-DCE, as well as the transformation of 1, 1-DCE as it was repeatedly transformed at increased aqueous concentrations. Model simulations were then performed under the transport conditions of the field test to explore the effects of the bioaugmentation dose and the response of the system to tile biostimulation with alternating pulses of dissolved butane and oxygen in the presence of 1, 1-DCE (50 $\mu$g/L) and 1, 1, 1-TCA (250 $\mu$g/L). A uniform aquifer bioaugmentation dose of 0.5 mg/L of cells resulted in complete utilization of the butane 2-meters downgradient of the injection well within 200-hrs of bioaugmentation and butane addition. 1, 1-DCE was much more rapidly transformed than 1, 1, 1-TCA, and efficient 1, 1, 1-TCA removal occurred only after 1, 1-DCE and butane were decreased in concentration. The simulations demonstrated the strong inhibition of both 1, 1-DCE and butane on 1, 1, 1-TCA transformation, and the more rapid 1, 1-DCE transformation kinetics. Results of tile field demonstration indicated that bioaugmentation was successfully implemented; however it was difficult to maintain effective treatment for long periods of time (50 days or more). The demonstration showed that the bioaugmented experimental leg effectively transformed 1, 1-DCE and 1, 1-DCA, and was somewhat effective in transforming 1, 1, 1-TCA. The indigenous experimental leg treated in the same way as the bioaugmented leg was much less effective in treating the contaminant mixture. The best operating performance was achieved in the bioaugmented leg with about over 90%, 80%, 60 % removal for 1, 1-DCE, 1, 1-DCA, and 1, 1, 1-TCA, respectively. Molecular methods were used to track and enumerate the bioaugmented culture in the test zone. Real Time PCR analysis was used to on enumerate the bioaugmented culture. The results show higher numbers of the bioaugmented microorganisms were present in the treatment zone groundwater when the contaminants were being effective transformed. A decrease in these numbers was associated with a reduction in treatment performance. The results of the field tests indicated that although bioaugmentation can be successfully implemented, competition for the growth substrate (butane) by the indigenous microorganisms likely lead to the decrease in long-term performance.

  • PDF

오존을 이용한 수조속의 오염물질 제거특성에 관한 실험적 연구 (A study on sanitary emprical for specific property removal of pollution material inter a water tank by ozone)

  • 이관영;안승섭;박상현
    • 한국산업융합학회 논문집
    • /
    • 제5권1호
    • /
    • pp.75-80
    • /
    • 2002
  • In this study, the initial number of bacteria before ozone sterilizing shows 290 per $1m{\ell}$ in RUN 1 and RUN 2 equally, but the removal rate shows more than 50% in RUN 1, and 100% in RUN 2 respectively when ozone injection amount is $0.28mg/{\ell}$. It is regarded as a satisfactory result that E-coli concentration without ozone contact is 890, rapid removal effect of E-coli is observed in $0.28mg/{\ell}$ of ozone, and E-coli is removed perfectly in $0.84mg/{\ell}$ of ozone. It is thought that an excellent efficiency is obtained for vibrio alginolyticus because the initial number of bacteria before ozone contact is positive, but it is altered to negative after ozone contact. CODcr shows the tendency which is somewhat reduced as the ozone injection is increased, but the general effect is appeared not so much, and it is thought that the tendency is caused by the reason that sea water contains much salt which is estimated as a component of CODcr, therefore it is regarded that ozone contact has not an important effect on salinity. It is thought that the frequency of changing salt water in the fish preserve of a sliced raw fish restaurant can be reduced to under the standard because NTU of 7 days after sea water injection is 0.70 in the experiment of turbidity, hut more than 50% of turbidity removal efficiency is appeared at $0.28mg/{\ell}$ of ozone injection, and it shows 70% at $0.84mg/{\ell}$ of ozone injection in RUN 1 and RUN 2 commonly.

  • PDF

접촉조 결합형 연속회분식반응조를 이용한 질소제거 (Contactor Coupled Sequencing Batch Reactor for Nitrogen Removal)

  • 남세용;이상민;김동욱;서용찬
    • 대한환경공학회지
    • /
    • 제27권11호
    • /
    • pp.1141-1145
    • /
    • 2005
  • 접촉부와 간헐포기부로 구성된 접촉조 결합형 연속회분식반응조를 질소제거를 위해 제안하고 실험적으로 연구하였다. 짧은 체류시간의 접촉반응을 통해 활성슬러지 플록에 유기물질이 생물흡착되지만 불완전 대사가 진행된다는데 근거를 두고 있다. 결과적으로 실하수의 경우 유입 유기물질의 61.2%가 접촉반응 30분 만에 흡착되었다. 유기물질의 비흡착량은 22.3 mg SCOD/g MLVSS였으며, 이는 후속되는 공정에서 탈질효율의 향상에 기여하였다. 연속운전을 통한 전체적인 처리효율은 TCOD/TKN 비가 6이하의 낮은 조건에서도 SCOD 및 T-N 제거율이 각 86%와 60%를 유지하였다.