• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.218-225
• /
• 2008

When the heat release and acoustic pressure fluctuations are generated in the combustor by irregular combustion, these fluctuations affect the mass flow rate of the propellants injected through the injectors. Also, the variations of the mass flow rate by these fluctuations again bring about irregular combustion and furthermore that is related with combustion instability. Therefore, it is very important to identify the mass variation for the pressure fluctuation on the injector and to investigate its transfer function. So, we first have studied quantifying the variation of mass flow rate generated in simplex swirl injector by injection pressure fluctuation. To acquire the transient mass flow rate in orifice with time, we have tried to measure of the flow axial velocity and liquid film thickness in orifice. The axial velocity is acquired through theoretical approach after measuring the pressure in orifice and the flow area in the orifice is measured by electric conductance method. As results, mass flow rate calculated by axial velocity and liquid film thickness measuring in orifice accorded with mass flow rate acquired by direct measuring method in the small error range within 1 percents in steady state and within 6 percents as average mass flow rate in pulsated state. Hence this method can be used to measure the mass flow rate not only in steady state but also in unsteady state because the mass flow rate in the orifice can acquire with time and this method shows very high accuracy based on the experimental results.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.83-88
• /
• 2022

With high performance and wide application, a CNTFET has been attracting a lot of attention as a next-eneration semiconductor, but the manufacturing process of CNTFET has not been mature enough, which makes commercialization difficult. In order to overcome the imperfections of the CNTFET manufacturing process and to increase the possibility of commercialization, this paper analyzes the CNTFET SRAM performance variation according to the CNTFET partial density change based on the recently reported CNTFET manufacturing process. Through HSPICE circuit simulation analysis using the existing 32nm CNTFET HSPICE library file, transistors whose performance variation is less sensitive to partial CNT density are selected among the six transistors constituting the SRAM cell and acceptable CNT density range is proposed. As the result of analysis, it is found that when the CNT density of the two transistors connected to the bit line in SRAM cell changed from 6/32nm to 8/32nm, the deviation of SRAM performance is less than 9% and when the CNT density is less than 5/32nm, the SRAM delay is increased by more than 8 time.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.3
• /
• pp.165-169
• /
• 1998

Anthers of three cross combinations of hot-pepper(Capsicum annuum L.) were cultured on Dumas De Vaulx medium supplemented with some growth regulators. The embryo production efficiency and the diversity for agronomic traits in $A_2$ lines were investigated. The embryo production frequencies of hybrid combinations were ranged from 16.4% to 43.4%, the highest embryo induction combination was DGSH $\times$ C-NH with 43.4% embryogenic efficiency. Among total 275 $A_2$ lines, phenotypic variants were found in six lines, 2.1% variant frequency. The diversity of $A_2$ lines derived from anther culture was different according to the cross combinations. Fruit color was within parental range, no transgressive variation was observed. However leaf color showed transgressive variation. In fruit length, fruit width and fruit weight, one C-HC $\times$ DGSH and DGSH $\times$ C-NH showed great diversity compared with doner parents while Cheokjo 1 $\times$ C-NH crossed with Cheokjo 1 with big fruit shape showed small diversity. Stem length to 1st branch was relatively similer to or longer than donor parents. Stem thick exhibited remarkable diversity. Node number to 1st branch distributed alomost within the range of donor parents in C-HC $\times$ DGSH combination, however great transgressive variations were observed in DGSH $\times$ C-NH and Cheokjo 1 $\times$ C-NH combinations.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.43-50
• /
• 2012

In this research, the value of consolidation index was investigated. The range of the investigated standard deviation was analyzed and the deviation based settlement was calculated. Also, the compression index, which is the effect of the uncertainty in the ground was analyzed using the flimsy ground construction method. The settlement behavior in each embankment compaction stage was analyzed by applying the precompression load method, drainage expediting method, and displacement method through numerical analysis. In addition to the above, the settlement behavior was studied by analyzing the Piled Raft method which is stable for long term settlement. As a result, the final settlement amount based on average analysis results was that the settlement based on each of the average interpretation value, mean value of the maximum and minimum value and average compression index was different. The result of the comparison shows the difference in variation coefficient by the difference in time. Amongst them, the Piled Raft method shows the most consistent variation coefficient regardless of time and it also was least affected by the compression index of uncertainty.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.49-53
• /
• 2011

Diamond-like carbon (DLC) films is a metastable form of amorphous carbon containing a significant fraction of Sp3 bond. DLC films have been characterized by a range of attractive mechanical, chemical, tribological, as well as optical and electrical properties. In this study DLC films were prepared by the RF magnetron sputter system on $SiO_2$ substrates using graphite target. The effects of the post annealing temperature on the Property variation of the DLC films were examined. The DLC films were annealed at temperatures ranging from 300 to $500^{\circ}C$ using rapid thermal process equipment in vacuum. The variation of electrical property and surface morphology as a function of annealing treatment was investigated by using a Hall Effect measurement and atomic force microscopy. Raman and X-ray photoelectron spectroscopy analyses revealed a structural change in the DLC films.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.1
• /
• pp.44-49
• /
• 2003

Masan Bay is one of the most heavily polluted bay in Korea owing to the large industrial complex and urban area. Water transparency, Secchi depth in meter, was observed 33 times totally at four sites during 1995 through 2002 and analysed statistically. The range was 0.2∼7.2m, mean 204m, and variation coefficient 60% in totally. Roughly speaking, monthly mean showed lower value April or July than other months. Seasonal mean showed lower in spring or summer than other seasons. Yearly mean was lowest in '95 and '98 during 7 years. Each sampling site showed a different patterns by the monthly, seasonal or yearly transparencies. Inner bay area, S1 site, showed lowest transparency and highest variation coefficient owing to the streamlets and urban area. And it was supposed that one of the important factor affecting different transparency distribution of most seaward site, S4 site, among four sites in the Masan Bay may be the underwater effluents of urban sewage water treated.

• Ocean and Polar Research
• /
• v.30 no.3
• /
• pp.335-345
• /
• 2008

In order to study spatial variabilities and major controlling factors, we measured fugacity of $CO_2(fCO_2)$, temperature, salinity and nutrients in surface waters of the North Pacific($7^{\circ}30'{\sim}33^{\circ}15'N$, $123^{\circ}56'E{\sim}164^{\circ}24'W$) between September$\sim$October 2007. The North Pacific and the marginal sea were distinguished by $fCO_2$ distribution as well as unique characteristics of temperature and salinity. There was a distinct diurnal SST variation in the tropical North Pacific area, and surface $fCO_2$ coincidently showed diurnal variation. In the North Pacific area, surface $fCO_2$ was mainly controlled by temperature, while in the marginal sea area it was primarily dependent on alkalinity and dissolved inorganic carbon concentrations. Air-sea $CO_2$ flux showed a large spatial variation, with a range of $-6.10{\sim}5.06\;mmol\;m^{-2}day^{-1}$. The center of subtropical gyre of North Pacific acted as a source of $CO_2(3.09{\pm}0.95\;mmol\;m^{-2}day^{-1})$. Tropical western North Pacific (i.e. the 'warm pool' area and the subtropical western North Pacific) acted as weak sources of $CO_2$($1.07{\pm}1.20\;mmol\;m^{-2}day^{-1}$ and $0.50{\pm}0.53\;mmol\;m^{-2}day^{-1}$, respectively). In the marginal sea, however, the flux was estimated to be $-0.68{\pm}1.17\;mmol\;m^{-2}day^{-1}$, indicating that this area acted as a sink for $CO_2$.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.485-488
• /
• 2007

Riverbank filtration is a kind of artificial aquifer recharge for the fresh water supply. By construction of several production wells penetrating the riverbank, surface water withdrawn from the river would pass riverbed. This extracted water is well known to be cooler than surface water in summer and warmer than surface water in winter, showing more constant water temperature. This characteristic of extracted water is applied to geothermal energy utilization. Prediction of the annual temperature variation of filtrated water is the major concern in this study. In Daesan-myeon, Changwon-si, Gyeongsangnam-do, South Korea, riverbank filtration facility has been on its operation for municipal water supply and thermal energy utilization since 2006. Appropriate hydraulic and thermal properties were estimated for flow and heat transfer modeling with given pumping rate and location. With the calibrated material properties and boundary conditions, we numerically reproduced measured head and temperature variation with acceptable error range. In the numerical simulation, the change of saturation ratio and river stage caused by rainfall was calculated and the resulting variation of thermal capacity and thermal conductivity was considered. Simulated temperature profiles can be used to assess the possible efficiency of geothermal energy utilization using riverbank filtration facility. Influence of pumping rate, pumping location on the extracted water temperature will be studied.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.203-211
• /
• 2013

Shear behavior of joint plane has been investigated considering the magnitude of normal stresses and initial surface roughness. Shear strength of joint plane has been measured by performing the multi-stage shear test in which applied normal stress level has been increased stepwise. Multi-stage shear test within the specified normal stress range has been repeated and two types of strength parameter variation have been observed: type 1 - both cohesion and friction angle decrease, type 2 - cohesion decrease and friction angle increase. Trends of strength parameter variation for the three rock types, gneiss, granite and shale, have been investigated and the influence of initial roughness of joint plane on the sequential shear strength change for the repeated multi-stage shear tests also has been analyzed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.213-219
• /
• 2013

Recently, with the rapid advancement in information and communication technology, indoor location-based services(LBSs) that require precise position tracking have been actively studied with outdoor-LBS using GPS. However, in case of a ship which consists of steel structure, it is difficult to measure a precise localization due to significant ranging error by the diffraction and refraction of radio waves. In order to reduce location measurement errors that occur in these indoor environments, this paper presents distance compensation algorithms that are suitable for a narrow passage such as ship corridors without any additional sensors by using UWB(Ultra-wide-band), which is robust to multi-path and has an error in the range of a few centimeters in free space. These improvement methods are that Pythagorean theory and adjacent node technique are used to solve the distance error due to the node deployment and distance variation analysis technique is applied to reduce the ranging errors which are significantly fluctuated in the corner section. The experimental results show that the number of nodes and the distance error are reduced to 66% and 57.41%, respectively, compared with conventional CSS(Chirp spread spectrum) method.