• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2024-2034
• /
• 2016

This paper presents a DC-DC buck converter with a Phase-Locked Loop (PLL) that can compensates for power efficiency degradation over a wide input range. Its switching frequency is kept at 2 MHz and the delay difference between the High side driver and the Low side driver can be minimized with respect to Process, Voltage and Temperature (PVT) variations by adopting the PLL. The operation mode of the proposed DC-DC buck converter is automatically changed to Pulse Width Modulation (PWM) or PWM frequency modes according to the load condition (heavy load or light load) while supporting a maximum load current of up to 1.2 A. The PWM frequency mode is used to extend the CCM region under the light load condition for the PWM operation. As a result, high efficiency can be achieved under the light load condition by the PWM frequency mode and the delay compensation with the PLL. The proposed DC-DC buck converter is fabricated with a $0.18{\mu}m$ BCD process, and the die area is $3.96mm^2$. It is implemented to have over a 90 % efficiency at an output voltage of 5 V when the input range is between 8 V and 20 V. As a result, the variation in the power efficiency is less than 1 % and the maximum efficiency of the proposed DC-DC buck converter with the PLL is 95.4 %.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.371-380
• /
• 2007

This paper proposes a new automatic compensation network (ACN) for a system-on-chip (SoC) transceiver. We built a 5 GHz low noise amplifier (LNA) with an on-chip ACN using 0.18 ${\mu}m$ SiGe technology. This network is extremely useful for today's radio frequency (RF) integrated circuit devices in a complete RF transceiver environment. The network comprises an RF design-for-testability (DFT) circuit, capacitor mirror banks, and a digital signal processor. The RF DFT circuit consists of a test amplifier and RF peak detectors. The RF DFT circuit helps the network to provide DC output voltages, which makes the compensation network automatic. The proposed technique utilizes output DC voltage measurements and these measured values are translated into the LNA specifications such as input impedance, gain, and noise figure using the developed mathematical equations. The ACN automatically adjusts the performance of the 5 GHz LNA with the processor in the SoC transceiver when the LNA goes out of the normal range of operation. The ACN compensates abnormal operation due to unusual thermal variation or unusual process variation. The ACN is simple, inexpensive and suitable for a complete RF transceiver environment.

• Ocean and Polar Research
• /
• v.31 no.1
• /
• pp.77-95
• /
• 2009

Ciliate abundance and biomass were determined at three anchored stations in the Han River estuary trimonthly from May 2006 to February 2008. The total abundance of ciliates ranged from 0-13,853 cells $l^{-1}$ and biomass ranged from $0.00-73.98\;ugC\;l^{-1}$. Owing to the large seasonal temperature variation (range 0.20-$27.2^{\circ}C$), ciliate abundance displayed marked seasonal variation, being higher in summer than in other seasons. Tintinnids dominated the ciliate communities at station YC where suspended sediment was highest. Difference of ciliate biomass between ebb tide and flood tide were irregular. Seasonal variations of ciliate carbon biomass at each station were related to temperature, suspended sediment and chl.a, especially nano chl.a. Geographical variations of ciliate carbon biomass in each season were related to suspended sediment and salinity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1233-1238
• /
• 2014

In this thesis, it is investigated the characteristics of Dye Sensitized Solar Cell (DSSC) according to variation of $TiO_2$ thickness (6, 12, 18, and $24{\mu}m$) and three distinct $TiO_2$ sintering temperatures (350, 450 and $550^{\circ}C$) by XRD, SEM, I-V and UV-Vis spectrophotometer. According to sintering temperature, $TiO_2$ was transformed into the anatase structure at $350^{\circ}C$, rutile structure at $550^{\circ}C$ and further into the two structure at $450^{\circ}C$. With increasing thickness up to $18{\mu}m$ and sintering temperature up to $450^{\circ}C$, respectively, the irradiance rate increased in the range of 9~26 percent and 2.80~5.10 percent. Whereas a further increase to $24{\mu}m$ and $550^{\circ}C$, the irradiance rate decrease in the range of 4~11 percent and 30~47 percent. The conversion efficiency increased in the range of 2.80~5.01 and 3.03~5.01 with increasing thickness up to $18{\mu}m$ and sintering temperature up to $450^{\circ}C$. By contrast, increase to $24{\mu}m$ and $550^{\circ}C$, the conversion efficiency decreased in the range of 3.31~5.01 and 2.80~3.89, respectively. The DSSC that thickness of $TiO_2$ were $18{\mu}m$ and sintered at $450^{\circ}C$ exhibited the most excellent characteristics, in which open-circuit voltage, short-circuit current, Fill Factor and conversion efficiency are 0.69 V, $11.4mA/cm^2$, 0.64 and 5.01%, respectively.

• Atmosphere
• /
• v.27 no.1
• /
• pp.105-118
• /
• 2017

This study assesses the performance of the Weather Research and Forecasting (WRF) model in reproducing regional climate over CORDEX-East Asia Phase 2 domain with different cumulus parameterization schemes [Kain-Fritch (KF), Betts-Miller-Janjic (BM), and Grell-Devenyi-Ensemble (GD)]. The model is integrated for 27 months from January 1979 to March 1981 and the initial and boundary conditions are derived from European Centre for Medium-Range Weather Forecast Interim Reanalysis (ERA-Interim). The WRF model reasonably reproduces the temperature and precipitation characteristics over East Asia, but the regional scale responses are very sensitive to cumulus parameterization schemes. In terms of mean bias, WRF model with BM scheme shows the best performance in terms of summer/winter mean precipitation as well as summer mean temperature throughout the North East Asia. In contrast, the seasonal mean precipitation is generally overestimated (underestimated) by KF (GD) scheme. In addition, the seasonal variation of the temperature and precipitation is well simulated by WRF model, but with an overestimation in summer precipitation derived from KF experiment and with an underestimation in wet season precipitation from BM and GD schemes. Also, the frequency distribution of daily precipitation derived from KF and BM experiments (GD experiment) is well reproduced, except for the overestimation (underestimation) in the intensity range above (less) then $2.5mm\;d^{-1}$. In the case of the amount of daily precipitation, all experiments tend to underestimate (overestimate) the amount of daily precipitation in the low-intensity range < $4mm\;d^{-1}$ (high-intensity range > $12mm\;d^{-1}$). This type of error is largest in the KF experiment.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.527-534
• /
• 2005

We investigate the pulsation characteristics in a multi-section DFB laser which is composed of one DFB section, phase tuning section, and gain section. Multi-section DFB lasers with anti-phase (AP) complex-coupled (CC) DFB structure show wide current ranges of gain and phase tuning sections fer stable pulsations compared to those with in-phase CC DFB structure or index-coupled DFB structure. For multi-section DFB lasers with AP CC DFB structure, the current range of a gain section for stable pulsations increases and the tuning range of the pulsation frequency increases as a coupling strength or a gain coupling coefficient increases Also, the tuning range using the phase variation in a phase tuning section increases. For a fixed coupling strength, the current ranges of gain and phase tuning sections for stable pulsations increase and the tuning range of the pulsation frequency increases as the length of a DFB section increases.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.1
• /
• pp.81-93
• /
• 2001

Far ultraviolet IMaging Spectrograph (FIMS) should be designed to maintain its structural stability and to minimize optical performance degradation in launch and in operation enviroments. The structural and thermal analyzes of grating and grating mount system, which are directly related to FIMS optical performance, was performed using finite element method. The grating mount was made to keep the grating stress down, while keeping the natural frequency of the grating mount higher than 100 Hz. Transient and static thermal analyzes were also performed and the results shows that the thermal stress on the grating can be attenuated sufficiently. The optical performance variation due to temperature variation was with the allowed range.

• Atmosphere
• /
• v.15 no.4
• /
• pp.229-239
• /
• 2005

The effect of inversion layer on the land and sea breeze near the Gangneung city was investigated. The land and sea breeze occurrence days were selected, and the height and the intensity of inversion layer were calculated with the upper air observational data of the Sokcho Station. The relationships between the temperature variation near the Gangneung and the inflow time, inland penetration and the inflow depth of the land and sea breeze were also analyzed. And the Gangwon Short-range prediction system was verified with the comparison of surface stream line by the Gangwon short-range prediction system with the AWS wind vector data. It was revealed that the inversion layer tended to block the sea breeze, shorten the inland penetration distance and lower the inflow depth, causing the temperature rise. The comparison and analysis of surface steam line by the Gangwon short-range prediction system and the AWS wind vector showed that the system quite well simulated the sea breeze, thus the system could be well utilized in the prediction of land and sea breeze.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.197-207
• /
• 2004

The developing Smart UAV in KARI supposes high speed flight as like a conventional plane, as well as vertical takeoff and landing as like a helicopter. Therefore, the air intake system should be designed to provide the sufficient air flow to the engine and the maximum possible total pressure recovery at the engine intake screen over a wide range of flight conditions. For this purpose, we designed the intake system using a pitor type intake model and plenum chamber. In this paper, we designed the intake model and analyzed the performance of designed intake system using the general-purpose commercial CFD code, CFD-ACE+. The analysis results of the total pressure variation and the velocity distribution were illustrated in this paper. The pressure recovery and distortion coefficient at a plane coincident with the compressor inlet were calculated and streamline variation through the intake system was investigated at the worst flight condition as well as the standard flight condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.89-101
• /
• 2019

The variation of content of 12 soybean seed isoflavone components was determined in the aglycone, glucoside, malonylglucoside and acetylglucoside groups of 44 Korean soybean cultivars grown in 2016 as well as in 2017. The total isoflavone content of the 44 cultivars averaged at $2935.4{\mu}g/g$ and was in the range of 950.6 to $5226.3{\mu}g/g$ for two years. Malonylglucoside group averaged at $2437.2{\mu}g/g$ with the highest proportion of isoflavone composition (83.0%). Significant differences were observed between cultivars, years and their interactions for both the total isoflavone and each composition group contents (P < 0.0001); however, no year-wise differences were observed for daidzein and genistin. The broad-sense heritability ($h^2$) within the set of 44 Korean soybean cultivars was as high as 0.93 for the total isoflavone content and was in the range of 0.8-0.92 for each composition group of isoflavone except for acetylglucoside. The total isoflavone content in cultivar group for soy-sprout was higher ($3850.4{\mu}g/g$) than that for the other cultivar groups of soy-paste and tofu ($3082.8{\mu}g/g$), black or green soybean cooked with rice ($2345.8{\mu}g/g$), and early maturity group ($1298.6{\mu}g/g$). The total isoflavone content of 'Sowonkong', a soybean cultivar for soy-sprout, was the highest ($5226.3{\mu}g/g$). In the cultivar group for soy-paste and tofu, the average isoflavone contents of 'Daepung', 'Daepung2ho', 'Saegeum', 'Uram', and 'Jinpung' were higher than $4000{\mu}g/g$. With the exception of small seeded cultivars with low isoflavone contents such as 'Sohwang' and 'Socheongja', the seed size and total isoflavone content were significantly negatively correlated in 2016 and 2017, respectively ($r=-0.47^{**}$ and $-0.49^{**}$). The number of days of growth from flowering to maturity did not affect the variations observed in isoflavone content.