• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.6
• /
• pp.561-568
• /
• 2009

We determined the contents of heavy metals in the muscle of wild and cultured fishes, collected from fish markets located in the eastern (Pohang), western (Gunsan), and southern (Tongyeong) coasts of Korea, from 2004 to 2005. As the results of monitoring the heavy metal contents in spring season, the wild fishes contained the range of Cd (0.01-0.08 mg/kg), Cr (ND-0.28 mg/kg), Cu (0.06-1.53 mg/kg), Hg (0.02-0.16 mg/kg), Mn (0.04-1.15 mg/kg), Ni (ND-0.09 mg/kg), Pb (0.03-0.41 mg/kg), and Zn (1.84-6.61 mg/kg). While for the cultured fishes, Cd (0.01-0.05 mg/kg), Cr (ND-0.17 mg/kg), Cu (0.05-0.61 mg/kg), Hg (0.02-0.13 mg/kg), Mn (0.03-0.17 mg/kg), Ni (ND-0.08 mg/kg), Pb (0.03-0.33 mg/kg), and Zn (2.06-6.20 mg/kg) were contained. In summer season, the contents of heavy metal in the muscle of the wild fishes were as follows: Cd (ND-0.11 mg/kg), Cr (0.01-0.37 mg/kg), Cu (0.21-1.31 mg/kg), Hg (0.01-0.11 mg/kg), Mn (ND-1.47 mg/kg), Ni (ND-0.26 mg/kg), Pb (0.06-0.48 mg/kg), and Zn (2.94-14.38 mg/kg). In comparison, the contents of heavy metal in the muscle of cultured fishes were Cd (ND-0.05 mg/kg), Cr (0.13-0.33 mg/kg), Cu (0.19-0.56 mg/kg), Hg (0.05-0.26 mg/kg), Mn (ND-0.14 mg/kg), Ni (ND-0.58 mg/kg), Pb (0.07-0.45 mg/kg), and Zn (2.43-7.53 mg/kg). Also the fall and the winter season, the heavy metal contents in the fishes showed almost similar with other season, however, Pb was lower and Zn was higher than both spring and summer season. The wild fishes contained the heavy metals a little more than the cultured fishes. We could not observe clear seasonal variation in the heavy metal contents of the fishes. The levels of Hg and Pb in all samples tested did not exceed the maximum permissible levels in the fishes set by the Korean Food & Drug Agency for safe human consumption.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.2
• /
• pp.195-205
• /
• 2020

Oceanic conditions in walleye pollock habitat in the East Sea have shown decadal fluctuations between warm and cold periods in turn. Specifically, sea surface temperature (SST) has shown a dramatic increase between the late 1980s and the middle 2000s, and abrupt decreasing patterns after the late 2000s. Oceanic conditions in the Dong-han Bay (spawning ground) and middle eastern coastal waters (fishing ground), however, indicated different fluctuation trends in SST, increasing in the Dong-han Bay after the late 1980s, and decreasing after the late 2000s. These fluctuation patterns were especially clear in February and March. Sea surface temperature in the middle eastern coastal waters of Korea soared continuously after the late 1980s, but did not show a distinct decreasing pattern after the late 2000s compared with Dong han Bay, except for February SST values. These long term water temperature changes in both walleye pollock spawning and fishing ground are related to variation in walleye pollock landings. Especially, abrupt changes in spawning ground SST can be one of the factors influencing survival in the early ontogenesis of walleye pollock, including egg and yolk larval stages. During the 1980s, the area of suitable spawning temperature (2-5℃) was wider, and the length of Walleye pollock egg and larval stages greater compared with past and present oceanographic environments. However, such patterns did not correspond with the optimal spawning temperature range and greater length of development of walleye pollock during the late 1980s likely triggering a decline in pollock stock. In conclusion, it has been supposed that the dramatic decrease in walleye pollock landings in the East Sea since the late 1980s was caused by increasing water temperature leading to both early mortality and unsuitable spawning conditions.

• Applied Biological Chemistry
• /
• v.51 no.2
• /
• pp.148-152
• /
• 2008

This study was to elucidate the effect of low dose gamma (${\gamma}$)-ray irradiation on the germination, seedling growth and antioxidant activity in sunflower seeds. The seed germination was stimulated in the range of 2.7${\sim}$8.0% by low dose ${\gamma}$-ray irradiation compared with that of the control; however, the germination of seeds stored for 4 months after irradiated was decreased at all low dose ${\gamma}$-ray irradiation groups. Especially, the germination rate of 32 Gy-irradiated seed group was much lower than that of the other groups and 8 Gy was the optimal radiation dose for germination at room temperature. Though there was variation with storage time and temperature, seedling growth stored at 10$^{\circ}C$ for 4 months after irradiated was promoted at the 1 Gy ${\gamma}$-ray irradiation group compared to seed stored at 25$^{\circ}C$. For the antioxidant activity of ${\gamma}$-ray irradiated seeds extract, 4 Gy and 32 Gy groups were significantly increased by 68.83% and 95.44%, respectively, compared to control at the concentration of 100 ${\mu}g$/ml.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.81-90
• /
• 2013

The purpose of this paper is to do GIS-based suitable site selection using Scope for Growth index of Styela clava in Jindong Bay. The aquaculture of Styela calva is only conducted in Korea, especially Jindong Bay. Suspended culture of Styela clava was initiated in 2001 and the annual production reached 15,084M/T, but declined to 1,412M/T in 2005. The annual production was increased slightly to 2,484M/T in 2012 but the production is lower than the beginning yield. Scope for Growth(SFG) can indicate interrelationships between environment and organism growth index in aquaculture. GIS-based suitable site selection can be available by the concept of SFG, and fishery management system can be constructed for the sustainable production. As a result of the assessment of habitat suitability, Jindong Bay's SFG value ranges 0.054~0.57J/day and Styela clava farm's SFG values range 0.054~0.57J/day, either. The correlation between Styela clava farm's SFG and the actual production has a good result, as r=0.786, p<0.05. The construction of fishery management system using habitat suitability index ensures the reasonable site selection and the sustainable production in aquaculture farm. It introduces an objective method for the interrelationships between the environmental variation and the organism growth. Consequently, it can promote the decision making practices for the sustainable fishery management.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.125-133
• /
• 2006

In this study, the Korean Industrial Standard(KS) penetration grade system was examined to evaluate its statistical validity. It was found from this limited study that the system has no gap between each grade, the binder falling out of limit trespasses into other binder grade. Therefore, many products can have similar property level with an adjacent grade even though the mean value is within the specification limit. It was also found out that the equal range setup of each grade, such as 20 for 40-60, 60-80, 80-100, has no statistical foundation. Since KS penetration grade is defined without gap between each grade, the producer must maintain the coefficient of variation below the level by the ASTM system to satisfy the normal quality control limit of products. Due to its lack of a gap between grades, higher percentage of products will be duplicated even if the mean is at the median of the specification limits due to material's quality uncertainty. Especially if the mean moves toward the upper limit, a half or more of the binder grade will be overlapped with the upper binder grade. Therefore, KS penetration specification should be immediately modified by statistically valid methodologies.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.55-61
• /
• 2000

Sn-37Pb and Sn-3.5Ag-0.7Cu solder balls of 0.3 mm diameter were reflow soldered with the variation of soldering peak temperature and conveyer speed of reflow machine. The peak temperatures far soldering were changed in the range of 220~$240^{\circ}C$ for Sn-37Pb and 230~$260^{\circ}C$ for Sn-3.5Ag-0.7Cu. As the results of experiments, optimum soldering condition for Sn-37Pb was $230^{\circ}C$ of soldering temp., 0.7~0.8 m/min of conveyer speed. The optimum condition for the Sn-3.5Ag-0.7Cu was $250^{\circ}C$ and 0.6 m/min. The maximum shear strength for the soldered joints of Sn-37Pb was 555 gf and of Sn-3.5Ag-0.7Cu was 617 gf. Thickness of the intermetallic compound Cu6Sn5 on the soldered interface was 1.13~1.45 $\mu\textrm{m}$ for Sn-37Pb and 2.5~4.3 $\mu\textrm{m}$ for Sn-3.5Ag-0.7Cu.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.348-354
• /
• 1994

Chitin and chitosan samples prepared from crab's shells under different conditions were compared for their physicochemical properties; and functionality in gastrointestinal tract by in vitro test. Their bulk density was in the range of $127{\sim}208\;mg/ml$, and their viscosity was $80{\sim}581\;cP$ in 0.1 chitin and $80{\sim}3,670\;cP$ in 0.5% chitosan solution, showing a wide variation. The degree of deacetylation in chitosan samples as determined by IR spectral analysis was relatively high, showing $81{\sim}93%$. At the same alkali concentration and reaction temperature, a longer reaction period gave an increased degree of deacetylation and lower viscosity. The water holding capacity of chitic substance became greater at higher soaking temperature; chitosan D at $37^{\circ}C$ showed the greatest value. Chitic substance with lower bulk density showed the higher water holding capacity. The retardation effect toward glucose absorption was higher in critic substances of lower density and higher water holding capacity; chitosan D showed the highest value of 38%. The retardation index toward bile acid absorption after 1 hour dialysis was $15{\sim}34%$ in chitic substances, 39% in pectin and 9% in cellulose. The retarding effect showed the highest value of 34% in chitosan D at 3% concentration.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.7
• /
• pp.55-62
• /
• 2005

The use of the bearing capacity equation is subjected to several uncertainties. In this study, estimation of the bearing capacity of footings based on the cone resistance q$_{c}$ is investigated. Non-linear finite element analyses based on a state-dependent stress-strain model were performed to obtain the load-settlement responses of axially loaded circular footings. Various soil and footing conditions, including different relative densities, depths of embedment, and footing diameters were considered in the analyses. Based on the finite element results, load-settlement curves were obtained and used to determine the unit limit bearing capacity in terms of the cone resistance q$_{c}$ for footings subjected to surcharge. Values of the unit bearing capacity for different embedment depths were in a narrow range, while considerable variation was observed with relative density D$_{R}$. It was observed that the unit limit bearing capacity normalized with respect to q$_{c}$ decreases as D$_{R}$ increases for a given surcharge.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.131-149
• /
• 1999

It was found that surface roughness has a first-order effect on the interface shear strength and accordingly it should be accurately quantified if its role is to be properly understood. To quantify the surface topography, first of all, a variety of commonly used surface roughness parameters and profiling methods were reviewed in this study. Based on this review, the normalized roughness parameter. $R_n$(Uesugi and Kishida, 1986), the profile roughness parameter, $R_L$, and the surface roughness parameter, $R_n$(Dove and Frost, 1996), were selected to be appropriate candidates of roughness parameters and the digital image analysis based Optical Profile Microscopy(OPM) method(Dove and Frost, 1996) to be an appropriate profiling method for this study. Using a smooth and three textured HDPE geomembranes which encompass the range of textures and texture patterns commonly used, a series of roughness measurements on virgin and previously used geomembranes were performed. The results showed that both $R_L\; and\; R_S$ values appropriately reflect the degree of texturing for the geomembranes used in this study, however, $R_n$ value showed limited ranges of variation which may not be sufficient to permit distinction between roughness values for certain conditions. The results of this study will be extended to the investigation of the influence of surface roughness on interface strength in future study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.38-43
• /
• 2013

In this study we aims to examine the effects of $Co_3O_4$ and NiO doping on the defects and electrical properties in ZnO-$Bi_2O_3-Sb_2O_3$ (Sb/Bi=0.5) varistors. It seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects in Co and Ni co-doped ZBS system, however only ${V_o}^{\cdot}$ appeared in Co- or Ni-doped ZBS. Even though the same defects it was different in capacitance (1.5~4.5 nF) and resistance ($0.3{\sim}9.5k{\Omega}$). The varistor characteristics were improved with Co and Co+Ni doping (non-linear coefficient, ${\alpha}$= 36 and 29, relatively) in ZBS. The various parameters ($N_d=1.43{\sim}2.33{\times}10^{17}cm^{-3}$, $N_t=1.40{\sim}2.28{\times}10^{12}cm^{-2}$, ${\Phi}b$=1.76~2.37 V, W= 98~118 nm) calculated from the C-V characteristics in our systems did not depend greatly on the type of dopant, which were in the range of a typical ZnO varistors. It should be derived a improved C-V equation carefully for more reliable parameters because the variation of the varistor capacitance as a function of the applied dc voltage is depend on the defect, frequency, and temperature.