• Journal of Ocean Engineering and Technology
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2004

In this paper, the performance of a wave absorbing system using an inclined punching plate, was investigated. Using the multi-domain boundary element method (BEM), the reflection coefficients of an inclined punching plate were tested with various design parameters, such as inclined angle, porosity, and wave frequencies. To confirm the numerical solutions, the systematic model test was conducted at 2-D tank and square tank. The numerical results were in good agreement with the experimental results within the entire frequency range. It was found that an inclined punching plate had an excellent wave absorbing efficiency, compared to a horizontal one. Also, the optimal range of an inclined angle had an excellent wave absorbing efficiency, compared to a horizontal one the optimal range of the inclined angle is 10°<β<20°. The developed wave absorber was installed at KRISO's square basin, and is working effectively for various model tests.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.3
• /
• pp.289-303
• /
• 2015

In this paper, an optimal guidance law with terminal angle constraint considering the seeker's lock-on condition, in which the target is located within the field-of-view (FOV) and detection range limits at the end of the midcourse phase, is proposed. The optimal solution is obtained by solving an optimal control problem minimizing the energy cost function weighted by a power of range-to-go subject to the terminal constraints, which can shape the guidance commands and the missile trajectories adjusting guidance gains of the weighting function. The proposed guidance law can be applied to both of the midcourse and terminal phases by setting the desired relative range and look angle to the final interception conditions. The performance of the proposed guidance law is analyzed through nonlinear simulations for various engagement conditions.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.101-106
• /
• 2004

Purpose: To determine the efficacy of the SDBBA (Subtalar distraction bone block arthrodesis) procedure on patients with late complication of intra-articular calcaneal fractures including subtalar joint arthritis and anterior ankle impingement syndrome. Materials and Methods: Five cases in which the SDBBA procedure was implemented were followed for more than one year. All five patients were male with an average age of 56. Clinically, the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and the pain score were assessed. Radiographically, the talocalcaneal height and the talar inclination angle were determined. Results: All five patients achieved subtalar joint fusion. The average pre-operative AOFAS score was 22.8 scores (range, 8-32 scores). At last follow-up, these scores improved to an average of 72.4 scores (range, 64-82 scores). The average pre-operative pain score was 8.2 scores (range, 7-10 scores). At last follow-up, these scores improved to an average of 13.2 (range, 12-15 scores). The average pre-operative talocalcaneal height was 72.8 mm (range, 70-77 mm), average post-operative talocalcaneal height improved to 79.8 mm (range, 78-84 mm). At final follow-up, these measurement was slightly decreased to average 78.6 mm (range, 74-83 mm). The average pre-operative talar inclination angle was 13.2 degrees (range, 12-15 degrees), average post-operative talar inclination angle improvedto 19.2 degrees (range, 15-24 degrees). At final follow-up, these measurement was slightly decreased to average 18.6 degrees (range, 12-24 degrees). Four patients achieved successful outcomes. One patient developed a wound infection with subsequent sural neuropathy as well as collapse of the bone graft. Conclusion: This study shows that the SDBBA procedure successfully restores the talocalcaneal height and tibio-talar relationship. This procedure is useful in surgically managed patients with talo-calcaneal height loss and anterior ankle impingement syndrome due to the late complications of calcaneal intra-articular fractures.

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.4
• /
• pp.223-228
• /
• 2012

Purpose: To treat hallux valgus in old age patients with chevron metatarsal osteotomy and to see the subsequent clinical and radiological outcomes. Materials and Methods: 23 cases of 18 hallux valgus patients of age 60 years or older who received proximal or distal corrective osteotomy from April 2007 to August 2009 and were followed up for at least 1 year were included in the study. The mean age at operation was 65 years (range, 60~81 years), and the mean follow-up period was 2 years and 6 months (range, 1 year~3 years 6 months). Clinical outcome was assessed with the American Orthopaedic Foot and Ankle Society (AOFAS) score, complications, satisfaction rate, as well as measurements and comparison of pre- and postoperative hallux valgus angles, the 1st~2nd intermetatarsal angle, and the position of hallucal medial sesamoid bone. Results: The AOFAS score was improved from preoperative average of 35.1 (range, 13-47) to average 85.1 at last follow-up (range, 75-100). Patients were satisfied about the operation in 21 cases (91.3%). Preoperative hallux valgus angle was $31.7^{\circ}$ on average (range, $19.1^{\circ}-48.9^{\circ}$), and $4.9^{\circ}$ on average at last follow-up (range, $0.3^{\circ}-21.2^{\circ}$). The 1st~2nd intermetatarsal angle was $14.4^{\circ}$on average (range, $8.7^{\circ}-25.7^{\circ}$) and $3.1^{\circ}$ on average at last follow-up (range, $0.6^{\circ}-7.5^{\circ}$). The hallucal medial sesamoid bone position was improved from preoperative average 3.5 (range, 3-4) to postoperative average 1.0 (range, 0-2). Conclusion: Proximal and distal metatarsal osteotomy treatment yielded good clinical and radiological outcomes in old age hallux valgus patients.

• Physical Therapy Korea
• /
• v.25 no.4
• /
• pp.19-26
• /
• 2018

Background: Alignment of the lower limb is an important factor, influencing balance and gait in kinematics and kinetics, in patients with and without a flat arched foot. Flat arched foot are associated with the range of motion (ROM) of the hip and alignments of the knee joints, is strongly influenced. Objects: The purpose of this research was to investigate the relationship between hip joint ROM and quadriceps angle (Q-angle), by dividing them into two groups according to the presence or absence of flat feet, using a navicular drop test (NDT) and resting calcaneal stance position (RCSP). Methods: Forty elderly patients were allocated to the experimental group (flat foot group, n1=20) or the control group (non-flat group, n2=20). Universal and digital goniometer, tractograph and tape measure were used to determine the related changes in the hip ROM, Q-angle, NDT and RCSP. Results: Data were analyzed using the Pearson correlation coefficients. Active internal ROM of the hip joint (right, r=.803, p<.001), (left, r=.951, p<.001) were highly correlated with NDT, and also, was moderately correlated with Q-angle (right, r=.562, p=.019), (left, r=.757, p<.001). Passive internal ROM of the hip joint (right, r=.742, p=.001), (left, r=.922, p<.001) were highly correlated with NDT, and also, was moderately correlated with RCSP (right, r=-.530, p=.029) and with Q-angle (right, r=.710, p=.001), (left, r=.698, p=.002) in the flat foot group. However, no strong correlation among the hip ROM, NDT, RCSP and Q-angle were found in the non-flat foot group. Conclusion: This research may provide evidence of the correlations between hip internal ROM and flat foot.

• The Journal of Korean Physical Therapy
• /
• v.29 no.4
• /
• pp.158-163
• /
• 2017

Purpose: The purpose of this study was to investigate the relationship among pain, range of motion of the neck, neck disability index and grip strength after thoracic manipulation and cervical stabilization training in patients with chronic neck pain. Methods: In this study, twelve subjects with chronic neck pain were included. All participants had thoracic manipulation and cervical stabilization training. Intervention was conducted three times per a week, for 4 weeks. The visual analogue scale (VAS), range of motion of neck, neck disability index (NDI), as well as the grip strength before and after intervention were measured in all participants. Paired t-test was used to compare variables before and after intervention. Pearson correlation analysis was used to identify the correlations between the variables. Results: All variables after the intervention were significantly improved. There was a significant negative correlation between VAS and flexion angle of the neck (r=-0.669, p<0.05). Moreover, there was a significant positive correlation between NDI and VAS (r=0.636, p<0.05), and a significant negative correlation between NDI and flexion angle of the neck (r=-0.692, p<0.05). Conclusion: Patients with reduced pain following therapeutic intervention illustrated that there would be an improvement in the flexion angle rather than the extension angle of the neck, and that those with increased flexion angle would have less restriction of activities in daily living.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.838-848
• /
• 2014

We present a simulation study of an algorithm for the range and angle of arrival(AOA) estimation with an interferometric synthetic aperture radar(InSAR) altimeter using a real digital elevation model(DEM). We also illustrate a step-by-step procedure of generating raw InSAR data, as well as their range and azimuth compressed data, which is to be used for the subsequent altitude and angle estimation. The AOA is estimated using a deterministic maximum likelihood estimator(DMLE) applied to the first arrived point for each pulse in the compressed data obtained with three antennas. The range bin size and the pulse repetition interval(PRI) are much smaller than the cell size of the DEM used in this study. To make the DEM compatible to the radar parameters, we first generate a higher resolution DEM by linearly interpolating the given DEM. After a brief description of the principle of the InSAR altimeter, the algorithms for altitude and angle estimation are presented, and their performance is assessed through simulation.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.3-10
• /
• 2010

The numerical study was conducted using the equation of Vanapalli et al.(1996) related shear strength of unsaturated soils. Angle of shearing resistance(${\Phi}^b$) and angle of internal friction(${\Phi}^{\prime}$) appear identically in lower suction range, but angle of shearing resistance(${\Phi}^b$) has non-linearity as suction increases. Nevertheless, the numerical study was conducted using angle of shearing resistance(${\Phi}^b$) in even lower suction range because of limit of program function. However, behavior of real ground on applying numerical study can be analysed wrong by it. Therefore in this paper numerical analysis on applying the equation of Vanapalli et al.(1996) and ${\Phi}^b$ has been compared about unsaturated slope considering continuous rainfall.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.4
• /
• pp.391-397
• /
• 2009

In this paper, longitudinal static stability is investigated, which is an essential requirement for the safety and the performance of the human powered hydrofoil boat (HPHB). In case a disturbance changes the trim angle of the boat, the derivative of the moment about the center of gravity must be negative in order to make the boat to be stable. The equation to evaluate the longitudinal static stability of the EPISODE, a HPHB of Chungnam National University with a height controlling system(HCS) is derived. From the derivative it is confirmed that a longitudinal and vertical position of the center of gravity is important for a HPHB. The range of a trim angle while the boat is foil-born was found with a HCS under the condition of mechanical restraint. And it is confirmed that the longitudinal static stability is satisfied for EPISODE in certain range of a trim angle. It is also shown that the longitudinal static stability and a range of the trim angle can be determined from the principal dimensions of a HPHB, therefore, it can be applied from the stage of the conceptual design of HPHB.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.1
• /
• pp.42-52
• /
• 1987

Experimental investigation on the characteristics of the air flow around a square prism located in a uniform flow with various angles of attack was carried out. Experimental results were obtained for the angle of attack from 0 .deg. to 45 .deg. and for Reynolds No. from $2.6{\times}^4$to $12.8^4$. Seperation and reattachment was occurred on the forward face (face AB). Reattachment phenomenon was not developed in the range of attack angle lower 13 .deg. . But, for the range, 13 .deg. .approx. 35 .deg. , the reattachment developed and its position was moved forward the angle of attack increases. Pressure distributions on the reattachment face has a maxium at the reattachment point and a minimum at the separation point. Pressurea on two back faces are nearly symmetric in spite of the changes of the angle of attack and are influenced by the turbulence in rearward flow field.