• 제목/요약/키워드: Random Decrement기법

검색결과 8건 처리시간 0.022초

벡터 트리거조건에 의한 Random Decrement 함수의 모우드 해석 (Modal Analysis of the Vector Triggering Random Decrement Function)

  • 정범석;이외득
    • 한국전산구조공학회논문집
    • /
    • 제15권2호
    • /
    • pp.209-218
    • /
    • 2002
  • Vector Random Decrement(VRD) 기법은 상시하중을 받는 선형의 구조물에서 동적응답의 장시간기록을 자유진동신호로 전환시키는 효과적인 알고리즘으로 발전되어 왔으며, 이에 따른 VRD함수는 실측한 자유감쇄응답과 거의 동일하게 모우드변수에 대한 정보를 갖는다. 본 연구에서는 모우드형상비의 개념을 동특성 평가과정인 Ibrahim Time Domain (ITD) 알고리즘에 적용하여 VRD 기법을 개선하였다. 제안된 기법에서는 이동시간의 보정과정에서 VRD 함수가 변환되지 않기 때문에 벡터 트리거조건에 적용된 최대 이동시간 영역의 정보가 VRD 함수에 누락 없이 포함되고 입력하중의 영향은 평균과정에서 소거된다. 제안된 기법에 의한 모우드변수의 추정결과를 일반적인 Random Decrement(RD) 기법과 비교하였으며, VRD 기법의 적용성을 모의 예제해석과 상시하중이 재하된 보의 실내실험으로 검증하였다.

실험적 모우드 계수를 이용한 교량의 주행하중 해석 (Moving Load Analysis of Bridge Structures Using Experimental Modal Data)

  • 이형진
    • 한국전산구조공학회논문집
    • /
    • 제15권3호
    • /
    • pp.409-420
    • /
    • 2002
  • 본 논문에서는 상시진동계측 결과를 활용하여 교랑의 이동하중해석을 수행하기 위한 구조재해석 기법을 제시하였다. 구조재해석을 위해 필요한 실구조물의 고유진동수와 모우드 형상은 직접퓨리에 분석을 통해 구하고, 감쇠비는 Random Decrement기법을 이용하는 방법을 사용하였다. 또한, 계측 모우드 형상을 구조재해석에 필요한 자유도로 보간하기 위한 보간법을 제시하였다. 더불어, 제시된 구조재해석기법을 이동질량 모형에 기초한 주행하중 해석에 적용하여 이를 직접 해석한 결과와 비교하였다 해석결과는 상시진동 계측의 결과만을 이용하여 수행된 구조재해석 결과도 교량의 실제 응답을 잘 표현할 수 있음을 보여주고 있다.

교통하중에 의한 상시진동기록을 이용한 교량의 손상추정기법 (Damage Estimation of Bridge Using Vibration Data Caused by Ordinary Traffic Loadings)

  • 윤정방;이진학;이종원;김재동;정환욱
    • 한국전산구조공학회논문집
    • /
    • 제14권1호
    • /
    • pp.77-85
    • /
    • 2001
  • 본 연구에서는 차량하중에 의한 상시진동기록을 이용한 교량의 손상추정기법을 연구하였다. 즉, 차량진행 중 측정된 신호로부터 구조물의 모드특성을 구하고, 이를 이용하여 손상위치 및 손상정도를 추정하는 알고리즘을 제안하였다. 제안기법의 검증을 위하여 차량하중을 재하할 수 있는 모형교량을 제작하여 손상실험을 수행하였다. 차량진행 중 교량의 수직가속도를 계측하였으며, 측정된 가속도시계열로부터 random decrement(RD) 기법을 사용하여 자유진동신호를 구한 후, 이로부터 구조물의 모드특성을 추정하였다. 추정된 모드특성을 기초로 신경망기법을 적용하여 손상위치 및 손상정도를 추정하였으며, 추정된 결과는 실제 손상과 비교적 잘 일치하였다.

  • PDF

랜덤 감쇠기법을 이용한 분할모형의 접수 감쇠계수 추정 (Wet Damping Estimation of the Segmented Hull Model using the Random Decrement Technique)

  • 김유일;박성건
    • 대한조선학회논문집
    • /
    • 제50권4호
    • /
    • pp.217-223
    • /
    • 2013
  • This paper presents the wet damping estimation of the segmented hull model using the random decrement technique together with the continuous wavelet transform. The tested 16 sea states are grouped together based on the speed of the ship in order to figure out the possible influence of the ship speed on the damping ratio. The measured time histories of vertical bending moment for each tested sea state were processed with random decrement technique to derive the free decay signal, from which the damping ratios are estimated. Also, the autocorrelation functions of the filtered signal were calculated and comparison was made with the free decay signal obtained from the random decrement technique. Then the wet damping ratios for each sea state group, as well as precise wet natural frequencies, are estimated by using continuous wavelet transform. It turned out that the wet natural frequencies derived from the measured signal did not show any significant discrepancy compared with those obtained by wet hammering test, whereas the damping ratio did. It was considered that the discrepancy of the damping ratio between in calm and moving water may be attributed to the viscous effects caused by dramatically different flow pattern and relative velocity between the vibrating structure and surrounding fluid particles.

개선된 POD기법을 이용한 구조물의 모드식별 (Modal Identification of Structure Using Improved Proper Orthogonal Decomposition Method)

  • 김호근;유은종;김지영
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2009년도 정기 학술대회
    • /
    • pp.205-208
    • /
    • 2009
  • POD(proper orthogonal decomposition)는 가해지는 하중(입력)의 계측없이 출력(응답)만으로 구조물의 동적특성을 파악할 수 있는 기법이다. 하지만 실제의 경우 측정데이터에 노이즈가 포함되어 있으면 분해가 완전하게 일어나지 않아 동적특성(특히 감쇠비)을 완벽히 파악하기 힘들다. 본 연구에서는 이러한 문제점을 보완하기 위해서 POD기법으로 추출된 각 모드의 자유진동파형에 RD(random decrement)법을 적용하여 노이즈에 의한 영향을 제거하는 방법을 제안하였다. 본 논문에서는 먼저 수치모델을 사용하여 계측노이즈가 있을 경우 제안된 방법을 사용하면 노이즈의 영향을 감소시킬 수 있음을 검증한 후 실험실 규모의 구조물모형에서 얻은 자유진동계측치에 제안된 기법을 적용하여 시스템식별을 수행하여 동특성을 파악하였다.

  • PDF

대형 컨테이너 선박의 유탄성 실선 계측 데이터 분석 Part I - 모달 파라미터 추정 (Full Scale Measurement Data Analysis of Large Container Carrier with Hydroelastic Response, Part I - Identification of Modal Parameters)

  • 김병훈;최병기;박준석;박성건;기혁근;김유일
    • 대한조선학회논문집
    • /
    • 제55권1호
    • /
    • pp.37-44
    • /
    • 2018
  • To understand the dynamic characteristics of the vessel with hydroelastic response, it is very important to estimate the dynamic modal parameters such as mode shapes, natural frequency, and damping ratio. These dynamic modal parameters of full scale ship are a priori unknowns, hence to be estimated directly based upon the full scale measurement data. In this paper, dynamic modal parameters were extracted by signal processing of acceleration and strain data measured from a large container ship whose loading capacity is 9400TEU. The mode shapes of the vibrating hull were identified using the proper orthogonal decomposition and the vibration response of hull was decomposed into its modal magnitudes. Natural frequencies of specific modes were derived via Fourier transform of these modal magnitude. Also, the free decay signal of the vibrating hull was obtained through the random decrement technique and the damping ratio was estimated with accuracy.

교통하중에 의한 상시미진동을 이용한 교량의 건전도 감시기법 (Health Monitoring Method for Bridges Using Ambient Vibration Data due to Traffic Loads)

  • 이종원
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.218-225
    • /
    • 2000
  • This paper presents intermediate results of an on-going research for identification of the modal and the stiffness parameters of a bridge based on the ambient vibration data caused by the traffic loadings. The main algorithms consist of the random decrement method incorporating band-pass filters for estimation of the free vibration signals the cross spectral density method for identification of the modal parameters and the neural networks technique for estimation of the element-level stiffness changes. An experimental study is carried out on a scaled bridge model with a composite section subjected to various moving vehicle loadings. Vertical accelerations are measured at several locations on the girder. The estimated frequencies and mode shapes are found to be well-compared with those obtained from the impact tests. The estimated stiffness changes using the neural networks are found to be very good for the case with the simulated data. However the accuracy is found to be not quite satisfactory for the case with the experimental data particularly for the small value of the stiffness changes.

  • PDF

광대역 무선 네트워크에서 멀티미디어 스트리밍 서비스를 위한 혼잡 제어 기법 (Congestion Control Scheme for Multimedia Streaming Service in Broadband Wireless Networks)

  • 이은재;정광수
    • 한국정보통신학회논문지
    • /
    • 제17권11호
    • /
    • pp.2553-2562
    • /
    • 2013
  • 광대역 무선 네트워크 환경에서 TCP의 혼잡 제어 알고리즘은 미디어 스트리밍 서비스가 요구하는 대역폭 및 지연 한계를 보장하기 어렵다. 본 논문에서는 고품질의 미디어 스트리밍 서비스를 제공하기 위한 혼잡 제어 기법인 COIN TCP (COncave INcrease TCP)를 제안하였다. COIN TCP는 라우터 큐의 데이터 양에 반비례하게 조절된 혼잡 윈도우의 증가율을 통해 혼잡 윈도우 크기를 오목하게 증가시킴으로써, 가용 대역폭의 빠른 점유와 Heavy Congestion의 방지가 가능하다. 또한 랜덤 손실을 고려한 패킷 손실률에 따라 혼잡 윈도우의 감소율을 조절하여 링크 활용도를 향상시켰다. 제안 기법의 실험 결과를 통해 광대역 무선 네트워크에서의 처리량 향상을 확인하였다.