• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.188-196
• /
• 2013

We have investigated the effects of formalin on the assembly of colloidal gold nanoparticles (AuNPs) prepared by laser ablation of a solid gold target in deionized water. Upon addition of formalin, the surface plasmon resonance (SPR) band at 519 nm for pure AuNPs decreases and shifts to red while a new broad SPR band appears at ~700 nm. The red-shift is prominent with increase in the incubation time. The average size of the initial AuNPs is around 12 nm but it increases to 23 nm after addition of formalin. It turns out that formalin acts as a cationic surfactant for AuNPs with negative surface charge in the colloidal solutions. Furthermore, through analysis of the Raman spectrum of formalin and the density functional theory calculations, we confirm that methanediol is the main species in formalin which is in charge of the aggregation of AuNPs.

• Archives of Pharmacal Research
• /
• v.4 no.2
• /
• pp.75-84
• /
• 1981

As the cetyltrimenthy ammonium bromide (CTAB) concentration increases to $2{\times}10^{-4}$/M the absorption maximum of ethyl orange (EO) makes a blue shift from 475 mm to 395 mm. At higher concentration of CTAB than $2{\times}10^{-4}$ / M the absorption maximum shifts to higher wavelength than 395 nm. A new peak at 395 nm is shown to result from the mixed micelle due to dye stacking interaction rather than from a change in dye geometry. Because Raman spectra of EO on interaction with varying amount of CTAB are similar to that of EO in water. EO retains trans azo type on interaction with CTAB. There is a change of c.m.c.s. of CTAB for the mixed micelle in the presence of salt. The effect of added salt on C. M. C. of CTAB for the mixed micelle is given that the logarithm of the c. m. c. is a linear function of the logarithm of the sum of the c. m. c. and the concentration of added salt.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.76-79
• /
• 2005

$Nd:YVO_4$ 연속발진 레이저(CW laser:Continuous wave laser)로 제작한 다결정 실리콘 박막의 이온도핑 효과를 조사하였다. PECVD로 증착한 비정질 실리콘 박막을 CW 레이저를 조사하여 결정화한 후 $B_2H_6$ 플라즈마 이온 도즈량을 변화시켜 이온 도핑을 하고 급속열처리 방법과 퍼니스 어닐링 방법으로 도펀트 활성화를 하였다. 이온 도핑된 CW 다결정 실리콘 박막의 이온 도즈량에 따른 판저항 변화를 비교하고, 급속열처리(RTA: Rapid Thermal Annealing)와 퍼니스 어닐링(FA: Furnace Annealing) 전후의 결정성 변화를 라만 스펙트럼(Raman spectrum) 을 통하여 분석하였다. 이온 도즈량이 증가함에 따라 판저항은 감소하고, 어닐링 후 이온 도핑에 의해 손상된 박막이 복원됨을 확인 할 수 있다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.458-461
• /
• 2019

The facile synthesis of shape-controlled Pd nanoparticles (PdNPs) with ascorbic acid as a reducing agent and cetyltrimethylammonium bromide (CTAB) as a capping agent is presented in this study. The synthesized PdNPs were characterized by UV-vis spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman Spectroscopy. The prepared PdNPs show efficient surface-enhanced Raman scattering (SERS) properties. SERS studies on the adsorption characteristics of 1,4-phenylene diisocyanide (1,4-PDI) on colloidal PdNPs have revealed that the relative peak intensity of the $(NC)_{free}$ and $(NC)_{bound}$ modes distinctly depends on the 1,4-PDI concentration as well as the shape of the PdNPs. Furthermore, we found that the PdNPs are also efficient photoelectron emitters such that the SERS spectrum of 4-nitrobenzenethiol (4-NBT) on PdNPs is readily converted to that of 4-aminobenzenethiol (4-ABT) under 632.8 nm radiation.

• Analytical Science and Technology
• /
• v.37 no.4
• /
• pp.201-210
• /
• 2024

Surface-enhanced Raman scattering (SERS) has emerged as a powerful technique for detecting and analyzing chemical and biological molecules at ultra-low concentrations. The effectiveness of SERS largely depends on structures with sub-10 nm gaps, prompting the proposal of various nanostructures as efficient SERS-active platforms. Among these, single-crystalline gold nanowires (AuNWs) are particularly promising due to their large dielectric constants, well-defined geometries, atomically smooth surfaces, and surface plasmon resonance across the visible spectrum, which produce strong SERS enhancements. This review comprehensively explores the synthesis, functionalization, and application of Au NWs in SERS. We discuss various methods for synthesizing AuNWs, including the vapor transport method, which influences their morphological and optical properties. We also review practical applications in chemical and biosensing, showcasing the adaptability of Au NWs-based SERS platforms in detecting a range of analytes, from environmental pollutants to biological markers. The review concludes with a discussion on future perspectives that aim to enhance sensor performance and broaden application domains, highlighting the potential of these sensors to revolutionize diagnostics and environmental monitoring. This review underscores the transformative impact of AuNW-based SERS sensors in analytical chemistry, environmental science, and biomedical diagnostics, paving the way for next-generation sensing technologies.

• The Journal of the Korea Contents Association
• /
• v.9 no.2
• /
• pp.432-438
• /
• 2009

In this paper, we evaluated the performance of the automatic classifier applied for the discrimination of acute alcoholic liver injury and chronic liver fibrosis. The classifier uses the discriminant peaks of the preprocessed Raman spectrum as a feature set. In preprocessing step, we subtract baseline and apply Savitzky-Golay smoothing filter which is known to be useful at preserving peaks. After identifying discriminant peaks from the spectra, we carried out the classification experiments using MAP and neural networks. According to the experimental results, the classifier shows the promising results to diagnosis alcoholic liver injury and chronic liver fibrosis. Classification results over 80% means that the peaks used as a feature set is useful for diagnosing liver disease.

• The Korean Journal of Pharmacology
• /
• v.32 no.3
• /
• pp.425-431
• /
• 1996

Human neutrophil elastases (HNElastase, EC 3.4.21.37), a causative factor of inflammatory diseases, are regulated by plasma proteinase inhibitors, alpha-proteinase inhibitor and ${\alpha}_2-macroglobulin$. Under certain pathological conditions, however, released enzymes or abnormal function of inhibitors may cause various inflammatory disease. NSAIDs have been clinically applied for treatment of inflammatory diseases. Inhibition of cyclooxygenase is a known mechanism of action of NSAIDs in the treatment of inflammatory disease. In in vitro experiments, HNElastase was inhibited by naproxen, phenylbutazone, and oxyphenbutazone, but ibuprofen, ketoprofen, aspirin, salicylic acid, and tolmetin did not inhibit elastase. HNElastase was also inhibited by chelating agents, EDTA & EGTA, and tetracyclines. Removal of divalent metal ions by EDTA caused inhibition of elastase, and reconstitution of the metal ions recovered the enzyme activity to a certain level. Frequencies and contours in the Raman spectra of various conditions of human neutrophil elastase undergo drastic changes upon partial removal and/or reconstitution of calcium and zinc ions. The metal ion content dependent activities and change of the contour of the Raman spectrogram suggest us that the mechanism of action of a chelator or chelator-like agents on neutrophil elastase may be related to the conformational change at/or near the active site, especially -C=O radical or -COOH radical.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.223-229
• /
• 2020

Biodiesel produced using microorganisms, which are recognized as the third-generation biomass, is among the various known renewable energy sources that can replace fossil fuels used in conventional transportation. Scenedesmus obliquus has been identified as an excellent species for biodiesel production, as it grows faster and can accumulate up to 40-50 percent of the dry cell weight. Enhancing production using S. obliquus requires measuring the cell mass for controlling the cultivation process. In the current study, S. obliquus was cultured for 75 days, and growth changes of the microalgae were measured by absorbance, microscopic imaging, and Raman spectroscopy. Between days 60 to 75 of culture, the change in absorbance was observed to be less than 3%, whereas the number of microalgae observed microscopically was more than three times higher. Moreover, the Raman spectroscopy results showed three strong peak values of β-carotene at 997 cm^-1, 1148 cm^-1, and 1515 cm^-1, with peak values of β-carotene showing greater than 3-fold increase during the culture period. Therefore, we predict that application of Raman spectroscopy will help in identifying the growth elements and growth degree in microalgae culture during increased biomass production.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.443-450
• /
• 2016

In this study, we propose a novel fiber optic sensor to show the measurement feasibility of distributed temperature and strains in a single sensing fiber line. Distributed temperature can be measured using optical time domain reflectometry (OTDR) with a Raman anti-Stokes light in the sensing fiber line. Moreover, the strain can be measured by fiber Bragg gratings (FBGs) in the same sensing fiber line. The anti-Stokes Raman back-scattering lights from both ends of the sensing fiber, which consists of a 4 km single mode optical fiber, are acquired and inserted into a newly formulated equation to calculate the temperature. Furthermore, the center wavelengths from the FBGs in the sensing fiber are detected by an optical spectrum analyzer; these are converted to strain values. The initial wavelengths of the FBGs are selected to avoid a cross-talk with the wavelength of the Raman pulsed pump light. Wavelength shifts from a tension test were found to be 0.1 nm, 0.17 nm, 0.29 nm, and 0.00 nm, with corresponding strain values of $85.76{\mu}{\epsilon}$, $145.55{\mu}{\epsilon}$, $247.86{\mu}{\epsilon}$, and $0.00{\mu}{\epsilon}$, respectively. In addition, a 50 m portion of the sensing fiber from $30^{\circ}C$ to $70^{\circ}C$ at $10^{\circ}C$ intervals was used to measure the distributed temperature. In all tests, the temperature measurement accuracy of the proposed sensor was less than $0.50^{\circ}C$.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.4
• /
• pp.4-23
• /
• 2015

Buried bronze objects are naturally corroded by their surrounding environment, which results in producing corrosion layers containing a number of constituents. Corrosion layers in stable condition protect the objects from the environment and also could provide information in terms of the objects. Characteristic and mechanism of the corrosion layers is likely to be valuable information for the conservation treatment. Many research have been conducted to figure out the formation and characteristic of the corrosion layers, but the more research should be conducted with various approach and analytical methods. Raman spectroscopy is one of the analytical methods to identify microcrystal as a compound while other analytical methods are used to identify element. Therefore, the aim of this research is to identify the characteristic of corrosion layers of both excavated bronze objects through the raman spectroscopy. Two analytical methods, which are raman spectroscopy and SEM~EDS, were used to analyse four excavated bronze bowls. In the case of bronze bowls, malachite was found from the exterior corrosion layer and albite, quartz, and microcline, which are minerals, were also found. Cuprite was detected from the interior corrosion layers illustrating slightly different spectrum due to the combined compound. Lead segregation shows the form of PbO, $PbSO_4$ and $PbCO_3$ or it replaced as cuprite. In this study, small number of samples were analysed. This research is likely to be useful information to figure out not only the characteristic of the corrosion layers but also the authenticity of the artifacts if relevant research will be conducted. Therefore, further comprehensive researches on the various archaeological objects and corrosion environment condition are required in the future.