• 제목/요약/키워드: Ram Speed

검색결과 194건 처리시간 0.027초

구동라인분리 센스앰프의 딜레이페일 개선 효과에 대한 분석 (Analysis of Improvement on Delay Failures in Separated Driving-line Sense Amplifier)

  • 김동영;김수연;박제원;김신욱;이명진
    • 전기전자학회논문지
    • /
    • 제28권1호
    • /
    • pp.1-5
    • /
    • 2024
  • DRAM의 성능 개선을 위해 센스앰프의 미스매치로 인한 센싱페일을 감소시켜야 한다. 플립페일과 달리 딜레이페일은 고속 동작이 요구될 때 더 심화될 수 있어 차세대 메모리 설계 시 면밀히 고려되어야 할 문제이다. Conventional SA는 증폭 시작 시 모든 트랜지스터가 동시에 동작하는 반면, SDSA는 BLB를 출력으로 하는 트랜지스터 2개만 먼저 동작시켜 오프셋을 완화할 수 있다. 본 논문에서는 SDSA의 딜레이페일에 대한 우수성을 시뮬레이션을 통해 검증하였다. Conventional SA에 비해 약 90%의 딜레이 페일 감소 효과를 갖고 있음을 확인했다.

W 도핑된 ZnO 박막을 이용한 저항 변화 메모리 특성 연구

  • 박소연;송민영;홍석만;김희동;안호명;김태근
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.410-410
    • /
    • 2013
  • Next-generation nonvolatile memory (NVM) has attracted increasing attention about emerging NVMs such as ferroelectric random access memory, phase-change random access memory, magnetic random access memory and resistance random access memory (RRAM). Previous studies have demonstrated that RRAM is promising because of its excellent properties, including simple structure, high speed and high density integration. Many research groups have reported a lot of metal oxides as resistive materials like TiO2, NiO, SrTiO3 and ZnO [1]. Among them, the ZnO-based film is one of the most promising materials for RRAM because of its good switching characteristics, reliability and high transparency [2]. However, in many studies about ZnO-based RRAMs, there was a problem to get lower current level for reducing the operating power dissipation and improving the device reliability such an endurance and an retention time of memory devices. Thus in this paper, we investigated that highly reproducible bipolar resistive switching characteristics of W doped ZnO RRAM device and it showed low resistive switching current level and large ON/OFF ratio. This may be caused by the interdiffusion of the W atoms in the ZnO film, whch serves as dopants, and leakage current would rise resulting in the lowering of current level [3]. In this work, a ZnO film and W doped ZnO film were fabricated on a Si substrate using RF magnetron sputtering from ZnO and W targets at room temperature with Ar gas ambient, and compared their current levels. Compared with the conventional ZnO-based RRAM, the W doped ZnO ReRAM device shows the reduction of reset current from ~$10^{-6}$ A to ~$10^{-9}$ A and large ON/OFF ratio of ~$10^3$ along with self-rectifying characteristic as shown in Fig. 1. In addition, we observed good endurance of $10^3$ times and retention time of $10^4$ s in the W doped ZnO ReRAM device. With this advantageous characteristics, W doped ZnO thin film device is a promising candidates for CMOS compatible and high-density RRAM devices.

  • PDF

TMS320C5416을 이용한 G.729A 보코더와 계산량 감소된 SOLA-B 알고리즘을 통합한 가변 전송율 보코더의 실시간 구현 (Real-time Implementation of Variable Transmission Bit Rate Vocoder Integrating G.729A Vocoder and Reduction of the Computational Amount SOLA-B Algorithm Using the TMS320C5416)

  • 함명규;배명진
    • 대한전자공학회논문지SP
    • /
    • 제40권6호
    • /
    • pp.84-89
    • /
    • 2003
  • 본 논문에서는 8kbps의 전송율을 가진 ITU-T C.729A 보코더에 Henja가 제안한 SOLA-B (Synchronized Overlap Add) 알고리즘을 적용하여 가변 전송율의 보코더를 TMS320C5416에 실시간 구현하였다. 이 방법은 부호화 시 SOLA-B 알고리즘을 이용하여 음성의 속도를 빠르게 해주고, 복호화 시 다시 SOLA-B 알고리즘을 이용하여 음성의 속도를 느리게 해줌으로써 정상속도의 음성을 재생시켜준다. 이때 SOLA-B 알고리즘의 계산량을 줄이기 위해 상호 상관 함수가 수행되는 샘플의 간격을 3 샘플씩 건너뛰면서 처리하였다. 실시간 구현된 G.729A 와 SOLA-B 알고리즘의 보코더는 8kbps 전송율일 때 인코더는 10.2MIPS이고 디코더에서는 2.8%MIPS의 최대 복잡도를 나타내었다. 그리고 6kbps 전송율일 때 인코더 18.3MIPS이고 디코더는 13.1MIPS의 최대 복잡도를 나타내었으며, 4kbps 전송율일 때 인코더 18.5MIPS이고 디코더에서 13.1MIPS의 최대 복잡도를 나타내었다. 사용된 메모리는 program ROM 9.7kwords, table ROM 4.5kwords, RAM 5.1kwords 정도이다. 출력된 파형은 C simulator와 Bit Exact 한 출력 결과를 보여주었다. 또한, 실시간 구현된 가변 전송율 보코더의 음질 평가를 위해 MOS 테스트를 수행한 결과 4kbp의 전송율에서 MOS값이 3.69정도로 측정되었다.

고성능 플래시 메모리 솔리드 스테이트 디스크 (A High Performance Flash Memory Solid State Disk)

  • 윤진혁;남이현;성윤제;김홍석;민상렬;조유근
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제14권4호
    • /
    • pp.378-388
    • /
    • 2008
  • 플래시 메모리는 전력 소모가 작고 충격과 진동에 강하며 크기가 작다는 특성 때문에 최근 노트북이나 UMPC(Ultra Mobile PC)와 같은 이동 컴퓨팅 시스템에서 하드디스크를 대체할 대용량 저장 매체로서 주목 받고 있다. 플래시 메모리에 기반한 저장 장치는 일반적으로 랜덤 읽기 성능이나 순차 읽기, 순차 쓰기 성능이 매우 좋은데 비해, 덮어쓰기가 불가능한 플래시 메모리의 물리적인 제약으로 인하여 소량의 랜덤 쓰기 성능은 떨어진다. 본 논문은 이 문제를 해결하기 위한 두 가지 중요한 특징을 갖는 SSD(Solid State Disk) 아키텍처를 제안하였다. 첫 번째로 비휘발성 이면서도 SRAM과 동일한 인터페이스로 덮어쓰기가 가능한 작은 크기의 FRAM(Ferroelectric RAM)을 NAND 플래시 메모리와 함께 사용하여 소량 쓰기 오버헤드를 최소화하였다. 두 번째, 호스트 쓰기 요청들도 소량 랜덤 쓰기와 대량 순차 쓰기로 분류하여 각각에 대해 최적의 쓰기 버퍼 관리 방법을 적용하였다. 평가 보드 상에서 SSD 프로토타입을 구현하고 PC 사용 환경의 워크로드에 기반한 벤치마크를 이용하여 성능을 평가해 본 결과 랜덤 패턴을 보이는 워크로드에서는 하드디스크나 기존의 상용 SSD들에 비해 처리율(throughput) 측면에서 3배 이상의 성능을 보였다.

컬럼-지향 데이터베이스를 위한 컬럼-인지 트랜잭션 관리 기법 (Column-aware Transaction Management Scheme for Column-Oriented Databases)

  • 변시우
    • 인터넷정보학회논문지
    • /
    • 제15권4호
    • /
    • pp.125-133
    • /
    • 2014
  • 컬럼-지향 데이터베이스 저장소는 우수한 입출력 성능으로 대용량 데이터 분석 시스템을 위한 매우 진보적인 모델이다. 전통적인 데이터 저장소는 빠른 쓰기 연산을 위하여 한 레코드의 속성들을 하드디스크에 연속적으로 배치되어 있는 가로-지향 저장 모델을 활용하였다. 하지만 검색이 대부분인 데이터웨어하우스 시스템을 위해서는 월등한 판독 성능 때문에 컬럼-지향 저장소가 더 적합한 모델이 되고 있다. 또한 최근에는 플래시 메모리를 사용한 SSD가 고속 데이터 분석 시스템을 위한 적합한 저장 매체로 인식되고 있다. 이제 플래시 메모리는 비휘발성, 낮은 전력소모, 빠른 데이터 접근 속도 등의 특징으로 최신 데이터베이스 서버의 핵심 저장 요소로 충분한 기반이 되었다. 하지만 컬럼 압축의 느린 특성과 일반 RAM 메모리에 비하여 상대적으로 느린 플래시 메모리 연산 특성을 고려하여 기존의 트랜잭션 처리 기법을 개선할 필요가 있다. 본 연구에서는 효율적인 트랜잭션 처리를 위하여 컬럼-인지 다중 버전로킹(CaMVL) 기법을 제안한다. CaMVL은 로크 관리 과정에서 플래시의 느린 쓰기 연산과 지우기 연산을 효과적으로 제어하기 위하여 멀티 버전 읽기를 허용하고 압축 로크를 허용하여 트랜잭션 처리 성능을 높인다. 또한 성능 검증을 위하여 시뮬레이션 모델을 제안하였으며 실험 결과 분석을 통하여 CaMVL이 기존의 트랜잭션 처리 기법보다 우수함을 확인하였다.

낙동강 하구역에서 2013-2015년 식물플랑크톤의 시·공간분포 특성 (The Characteristics of Spatio-Temporal Distribution on Phytoplankton in the Nakdong River Estuary, during 2013-2015)

  • 유만호;윤석현;박경우;김아람;윤상철;서영상
    • 해양환경안전학회지
    • /
    • 제22권6호
    • /
    • pp.738-749
    • /
    • 2016
  • 낙동강 상류지역 건설사업 이후, 식물플랑크톤의 시 공간 분포특성을 파악하기 위해 2013년 2월부터 2015년 12월까지 낙동강 하구둑에서 가덕도 동편에 이르는 수역에서 격월로 환경요인과 식물플랑크톤을 조사하였다. 환경요인은 연간 유의한 차이를 보이지 않았으나, 상 하부수역 및 계절적 차이가 나타났다. 상부수역은 돌말류, 녹조류, 남조류가 하부수역보다 높았고, 특히 담수돌말류와 남조류가 우점하였다. 반면 하부수역은 와편모류가 주로 출현하였다. 상관분석 결과, 상부수역은 Stephanodiscus spp., Asterionellopsis formosa, Microcystis spp.가 주로 담수방류에 의한 인위적인 유입과 관련성이 나타났다. 우점종과 상관관계가 나타난 환경요인은 수온, 풍속, DIP, DIN 등으로 나타났다. 하부수역에서 상위종으로 출현한 와편모류는 대부분 영양염류 및 바람과 상관성이 나타났다. 특히 하부수역에서 Prorocentrum donghaiense은 DIN, 풍속, 강풍발생 일수와 음의 상관성이 나타났고, 하계시기에 집중적으로 출현한다. 유사도와 PCA분석에서도 상부수역은 시기적인 구분이 뚜렷하지 않은 반면 하부수역에서는 계절적인 차이가 발생하였다. 하부수역은 2014년 일부시기를 제외하고, 크게 와편모류가 증가하는 6-8월과 돌말류가 우점하는 10-4월로 구분되었다. 이는 지리적 특성에 의한 담수 방류의 영향범위 차이가 담수종과 영양염류의 유입을 변화시켜 식물플랑크톤 군집특성에 영향을 미치고 있음을 의미한다.

Gravure Offset 인쇄에 의한 미세 전극용 Ag Paste 개발 (Gravure Offset Printed on Fine Pattern by Developing Electrodes for the Ag Paste)

  • 이상윤;장아람;남수용
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.45-56
    • /
    • 2012
  • Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.

Effects of Takju intake and moderate exercise training on brain acetylcholinesterase activity and learning ability in rats

  • Kim, Bo-Ram;Yang, Hyun-Jung;Chang, Moon-Jeong;Kim, Sun-Hee
    • Nutrition Research and Practice
    • /
    • 제5권4호
    • /
    • pp.294-300
    • /
    • 2011
  • Takju is a Korean alcoholic beverage made from rice, and is brewed with the yeast Saccharomyces cerevisiae. This study was conducted to evaluate the effects of exercise training and moderate Takju consumption on learning ability in 6-week old Sprague-Dawley male rats. The rats were treated with exercise and alcohol for 4 weeks in six separate groups as follows: non-exercised control (CC), exercised control (EC), non-exercised consuming ethanol (CA), exercised consuming ethanol (EA), non-exercised consuming Takju (CT), and exercised consuming Takju (ET). An AIN-93M diet was provided ad libitum. Exercise training was performed at a speed of 10 m/min for 15 minutes per day. Ethanol and Takju were administered daily for 6-7 hours to achieve an intake of about 10 ml after 12 hours of deprivation, and, thereafter, the animals were allowed free access to deionized water. A Y-shaped water maze was used from the third week to understand the effects of exercise and alcohol consumption on learning and memory. After sacrifice, brain acetylcholinesterase (AChE) activity was analyzed. Total caloric intake and body weight changes during the experiment were not significantly different among the groups. AChE activity was not significantly different among the groups. The number of errors for position reversal training in the maze was significantly smaller in the EA group than that in the CA and ET groups, and latency times were shorter in the EA group than those in the CC, EC, CT, and ET groups. The latency difference from the first to the fifth day was shortest in the ET group. The exercised groups showed more errors and latency than those of the non-exercised groups on the first day, but the data became equivalent from the second day. The results indicate that moderate exercise can increase memory and learning and that the combination of exercise and Takju ingestion may enhance learning ability.

Novel License Plate Detection Method Based on Heuristic Energy

  • Sarker, Md.Mostafa Kamal;Yoon, Sook;Lee, Jaehwan;Park, Dong Sun
    • 한국통신학회논문지
    • /
    • 제38C권12호
    • /
    • pp.1114-1125
    • /
    • 2013
  • License Plate Detection (LPD) is a key component in automatic license plate recognition system. Despite the success of License Plate Recognition (LPR) methods in the past decades, the problem is quite a challenge due to the diversity of plate formats and multiform outdoor illumination conditions during image acquisition. This paper aims at automatical detection of car license plates via image processing techniques. In this paper, we proposed a real-time and robust method for license plate detection using Heuristic Energy Map(HEM). In the vehicle image, the region of license plate contains many components or edges. We obtain the edge energy values of an image by using the box filter and search for the license plate region with high energy values. Using this energy value information or Heuristic Energy Map(HEM), we can easily detect the license plate region from vehicle image with a very high possibilities. The proposed method consists two main steps: Region of Interest (ROI) Detection and License Plate Detection. This method has better performance in speed and accuracy than the most of existing methods used for license plate detection. The proposed method can detect a license plate within 130 milliseconds and its detection rate is 99.2% on a 3.10-GHz Intel Core i3-2100(with 4.00 GB of RAM) personal computer.

일어서기 동작 시 시상면 골반 기울임이 엉덩관절과 무릎관절의 운동형상학에 미치는 영향 (Effect of Sagittal Pelvic Tilt on Kinematic Changes of Hip and Knee Joint During Sit-to-Stand)

  • 임인혁;최보람;김현숙
    • 한국전문물리치료학회지
    • /
    • 제18권3호
    • /
    • pp.26-37
    • /
    • 2011
  • Although there have been various studies related to the body's movement from a sitting to a standing position (sit-to-stand task), there is limited information on the kinematic changes on the frontal and transverse planes. The purpose of this study was to ascertain how pelvic tilt affects kinematic changes in the frontal and transverse planes in the hip and knee joints during a sit-to-stand task. For this study, 33 healthy participants (13 female) were recruited. Each participant rose from a sitting to a standing posture at his or her preferred speed for each of three different pelvic tilt trials (anterior, posterior, and neutral), and the measured angles were analyzed using a 3-D motion analysis system. A one-way repeated measure analysis of variance was performed with Bonferroni's post hoc test. In addition, an independent t-test was carried out to determine the sex differences in hip and knee joint kinematic changes during the sit-to-stand tasks. The results were as follows: 1) The hip and knee joint angle in the frontal and transverse planes showed a significant difference between the different pelvic tilt postures during sitting in the pre-buttock lift-off phase (pre-LO) (p<.05). Compared to the posterior pelvic tilt posture, the anterior pelvic tilt posture involved significantly greater hip joint adduction and internal rotation, knee joint adduction, and reduced internal rotation of the knee joint. 2) Sex differences were found with significant differences for males in the initial and maximal angles in the frontal plane of the hip and knee joint (p<.05). Females had a significantly smaller initial abduction angle of the hip joint and a significantly greater maximal angle of the hip adduction joint. These results suggest that selecting a sit-to-stand exercise for pelvic tilt posture should be considered to control abnormal movement in the lower extremities.