• 한국정밀공학회지
• /
• 제32권7호
• /
• pp.603-609
• /
• 2015

Railway vehicles driven by wheels obtain force required for propulsion and braking by adhesive force between wheels and rails, this adhesive force is determined by multiplying adhesion coefficient of the friction surface by the applied axle load. Because the adhesion coefficient has a peak at certain slip velocity, it is important to determine the maximum values of the friction coefficient on the contact area. But this adhesive phenomenon is not clearly examined or analyzed. Thus we have developed new test procedure using the scaled adhesion test-bench for analyzing of the adhesion coefficient between wheel and rail. This adhesion test equipment is an experimental device that contacts mutually with twin disc which are equivalent to wheels and rails of railway vehicles.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1391-1398
• /
• 2004

Railway wheels and axles belong to the most critical components in railway vehicles. The service conditions of railway vehicles became more severe in recent years due to the increase of speed. Therefore, a more precise evaluation of wheelset life and safety has been requested. Wheel/rail contact fatigue and thermal cracks due to braking heat are two main mechanisms of the railway wheel failure. In this paper, an evaluation procedure for the contact fatigue life of railway wheel is proposed. One of the main sources of the contact zone failure is the residual stress. The residual stress on wheel is formed during the manufacturing process which includes a heat treatment, and then is changed by contact stress developed by wheel/rail contact and thermal stress induced by braking. Also, the cyclic stress history for fatigue analysis is determined by applying finite elements analysis for the moving contact load. The objective of this paper is to estimate fatigue life by considering residual stress due to heat treatment, braking and repeated contact load, respectively.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.315-323
• /
• 2015

Nowadays, it is expected that mobility loads such as electric railways and electric vehicles will be penetrated gradually and affect on the power system stability by their load characteristics. Various researches have been carried out about electric vehicles for the recent decade though the load of electric railway could be forecasted because of the specified path and timetable, is a field with a long historic background. Some precise 5th polynomial equations are required to analyze the power system stability considering mobility load to be increased in the immediate future while the electric railway dispatching simulator uses load models with constant power and constant impedance for the system analysis. In this paper, seasonal urban railway load models are established as the form of 5th polynomial equations and substation load modeling methods are proposed merging railway station load models and general load models. Additionally, load management effects by the load modeling are confirmed through the case studies, in which seasonal load models are developed for Seoul Subway Line No. 2, Gyeongui Line and Airport Railroad and the substation load change is analyzed according to the railway load change.

• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.772-777
• /
• 2009

지구 온난화를 경감 하기위한 차세대 동력시스템으로서 연료전지 동력시스템은 승용차를 중심으로 활발하게 개발되고 있다. 가선이 설치되어있지 않은 철로에서의 철도차량의 경우에 있어서도 연료전지 동력시스템의 적용이 선진 각국을 중심으로 연구개발 되고 있다. 본 논문에서는 가속, 타행주행 및 감속을 반복하여 주행하는 경전철에 대하여 연료전지 하이브리드 동력시스템을 적용하고자 할 때 이에 대한 설계 및 제어전략을 논하였고, Matlab/Simulink로 모델링하여 시뮬레이션을 수행하였다.

• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.129-136
• /
• 2017

This paper aims to establish a guideline for ridership capacity of different rail vehicles for military passengers. Previous guideline is limited only to a Mungungwha(hauled by diesel locomotive) vehicle, but this paper expands the limitation to ITX- Saemaeul and urban rail vehicles classified to Electric Motivated Unit(EMU). The guideline considers both with and without personal armor conditions, and based on repetitive ridership experiments. The experiments are designed under considerations of the required number of soldiers for the sample spaces of the different rail vehicles. Moreover, the design tries to establish a concept of optimal capacity additionally to a traditional limiting ridership capacity. In order to do this, ridership comfort is questioned to participant soldiers repetitively over the experiments and all answers of them are surveyed as a results of it. The results of the experiments presented by this paper can be referenced to establish a new guideline on ridership capacity for Korean army.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2005-2010
• /
• 2011

On AC railway systems, the neutral sections are installed in front of substations and sectioning posts in order to avoid crash between power that have differing phases. In case railway vehicles pass through these neutral sections, it is necessary for them to switch to coasting driving by notch-off. This may reduce speed of the vehicles, resulting lowered train operation efficiency. The usage of automatic power switching systems makes it possible to pass neutral sections at notch-on, enhancing operation efficiency so that it is appropriate for high-speed railway applications. This paper analyzed inrush current of main transformer that installed on the train while passing through the neutral section using the simulator.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1475-1480
• /
• 2013

In this paper, the basic design study of a water-cooling jacket, which have reported no cases for applying to railway traction motors so far, were conducted for applying to Interior Permanent Magnet Synchronous Motor (IPMSM) for railway vehicles. The basic thermal characteristics analysis of the 110kW-class IPMSM was performed by using 3-dimentional thermal equivalent network method. The necessary design requirements of the water-cooling jacket were derived by analyzing the results of the basic thermal properties. Next, the thermal characteristics analysis technique was established by using the equivalent model of the solenoid-typed pipe to be installed on the inside of the water-cooling jacket for 110kW-class IPMSM. Finally, a design model of 6kW-class water-cooling jacket was derived through the analysis of various design parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.510-518
• /
• 2008

This paper presents recent development of (semi)-active steering bogies for railway vehicles and introduce the state-of-art of related technologies. Steering bogies have been studied in various researchers since they can offer high ride quality for passengers and reduce the maintenance costs of wheel and rail wear. Especially, they are considered to be a fundamental solution to dramatically reduce the squeal noise on tight curves. However, passive steering bogies such as self-steering bogies and forced steering bogies have shown their limits to cope with the various running conditions. Therefore, (Semi)-active steering bogies have been studied to overcome the drawbacks of the passive steering bogies. As a result, an active steering bogie, so called mechatronic bogie, is developed successfully in Europe and it has shown remarkable performance in test line.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.809-815
• /
• 2007

The floor structure of railway vehicles consists of plywood, rubber, and wood keystone plate which affects on the comfort of passengers. Its structural characteristics has been investigated experimentally and numerically for samples of beam and plate structure, and the real floor structure in this paper. The material properties of etch part measured directly by experiments. The deformation and stress distribution of the sample beams for 6 different joints were sought experimentally and calculated using a commercial software. The numerical calculation shows that the effect of friction and clearance between joints is crucial. The DMU/EMU plates were also experimented and compared for different loading conditions. The structural characteristics of the whole floor structure were calculated numerically. The results show that the method of joint between plywoods is an important factor to decide the strength of the floor structure of railway vehicles.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.923-931
• /
• 2008

Coupling rubber pad are important components in railway vehicles. It can be used for reduce shock, vibration and noise. Simple tension, equi-biaxial tension and pure shear test were performed to acquire the coefficient of rubber material which were Mooney-Rivlin and Ogden model. The finite element analysis was executed to evaluate the behavior of deformation and stress distribution by using the commercial finite element analysis code. Useful life evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, useful life prediction of rubber pad for railway vehicle were experimentally investigated. Accelerated heat-aging test for rubber material were carried. Compression set results changes as the threshold are used for assessment of the useful life and time to threshold value were plotted against reciprocal of absolute temperature to give the Arrhenius plot.