DOI QR코드

DOI QR Code

Estimation Study on the Wheel/Rail Adhesion Coefficient of Railway Vehicles Using the Scaled Adhesion Tester

축소 점착시험기를 이용한 휠/레일의 점착계수 추정에 관한 연구

  • Kim, Min Soo (Metropolitan Transportation Research Center, Korea Railroad Research Institute) ;
  • Hee Kim, Kyung (Metropolitan Transportation Research Center, Korea Railroad Research Institute) ;
  • Kwon, Seok Jin (High-Speed Railroad System Research Center, Korea Railroad Research Institute)
  • 김민수 (한국철도기술연구원 광역도시교통연구본부) ;
  • 김경희 (한국철도기술연구원 광역도시교통연구본부) ;
  • 권석진 (한국철도기술연구원 고속철도연구본부)
  • Received : 2015.05.28
  • Accepted : 2015.06.24
  • Published : 2015.07.01

Abstract

Railway vehicles driven by wheels obtain force required for propulsion and braking by adhesive force between wheels and rails, this adhesive force is determined by multiplying adhesion coefficient of the friction surface by the applied axle load. Because the adhesion coefficient has a peak at certain slip velocity, it is important to determine the maximum values of the friction coefficient on the contact area. But this adhesive phenomenon is not clearly examined or analyzed. Thus we have developed new test procedure using the scaled adhesion test-bench for analyzing of the adhesion coefficient between wheel and rail. This adhesion test equipment is an experimental device that contacts mutually with twin disc which are equivalent to wheels and rails of railway vehicles.

Keywords

References

  1. Zhang, W., Chen, J., Wu, X., and Jin, X., "Wheel/Rail Adhesion and Analysis by Using Full Scale Roller Rig," Wear, Vol. 253, No. 1, pp. 82-88, 2002. https://doi.org/10.1016/S0043-1648(02)00086-8
  2. Chen, H., Ban, T., Ishida, M., and Nakahara, T., "Adhesion between Rail/Wheel under Water Lubricated Contact," Wear, Vol. 253, No. 1, pp. 75-81, 2002. https://doi.org/10.1016/S0043-1648(02)00085-6
  3. Ohishi, K., Ogawa, Y., Miyashita, I., and Yasukawa, S., "Adhesion Control of Electric Motor Coach Based on Force Control Using Disturbance Observer," in: Advanced Motion Control, Proc. of the 6th IEEE on International Workshop, pp. 323-328, 2000.
  4. Iwnicki, S., "Handbook of Railway Vehicle Dynamics," CRC Press, 2006.
  5. Harrison, H., McCanney, T., and Cotter, J., "Recent Developments in Coefficient of Friction Measurements at the Rail/Wheel Interface," Wear, Vol. 253, No. 1, pp. 114-123, 2002. https://doi.org/10.1016/S0043-1648(02)00090-X
  6. Chen, H., Ishida, M., Namura, A., Baek, K.-S., Nakahara, T., et al., "Estimation of Wheel/Rail Adhesion Coefficient under Wet Condition with Measured Boundary Friction Coefficient and Real Contact Area," Wear, Vol. 271, No. 1, pp. 32-39, 2011. https://doi.org/10.1016/j.wear.2010.10.022
  7. Takaoka, Y. and Kawamura, A., "Disturbance Observer Based Adhesion Control for Shinkansen," Proc. of the 6th International Workshop on Advanced Motion Control," pp. 169-174, 2000.
  8. Kawamura, A., Takeuchi, K., Furuya, T., Takaoka, Y., Yoshimoto, K., et al., "Measurement of the Tractive Force and the New Adhesion Control by the Newly Developed Tractive Force Measurement Equipment," Proc. of the IEEE on Power Conversion Conference, pp. 879-884, 2002.
  9. Kim, M. and Kim, N., "Design of the Scaled Adhesion Tester for Analyzing the Adhesion Characteristic of Railway Vehicles," Proc. of the 8th WSEAS International Conference on Remote Sensing, pp. 24-26, 2012.
  10. Kim, M. S., "Analysis of the Wheel/Rail Adhesion Characteristic Using the Scaled Adhesion Tester," Recent Advances in Mechanical Engineering, Vol. 4, pp. 194-197, 2014.

Cited by

  1. Development of Novel Composite Powder Friction Modifier for Improving Wheel-rail Adhesion in High-speed Train vol.25, pp.6, 2018, https://doi.org/10.4150/KPMI.2018.25.6.501