• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5148-5155
• /
• 2013

전기철도와 인접하여 병행 설치되어 있는 전기통신선에는 전자유도현상에 의한 유도전압이 발생하여 통신장애 및 안전사고가 발생할 수 있다. 이와 같은 유도장해를 경감시키고 통신신뢰성을 확보하기 위하여, 차폐케이블의 적용과 함께 최근 추진되고 있는 복선전철화에 따른 영향을 검토할 필요가 있다. 본 논문에서는 AT급전방식 전기철도에서 인근 통신선에 유기되는 유도전압에 영향을 미치는 각종 인수 및 산출식을 검토하고, 유도전압 발생 예측치를 시뮬레이션을 통하여 정량적으로 분석하였다. 시뮬레이션 결과, 복선철도에서는 단선철도에 비해 통신선 유도잡음 전압이 18[%] 정도 감소하여 타궤조 효과가 영향을 미치는 것으로 나타났다. 또한, 복선철도를 기준으로, 50% 차폐 통신케이블에서는 유도잡음전압이 1/8로 감소하였으며, 15% 차폐통신케이블에서는 1/15로 감소함에 따라 차폐효과가 크고 유도잡음전압 영향을 최소화할 수 있는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.204-210
• /
• 2011

This paper present investigation of interoperable process and interaction-facts between urban and new ATS signalling system for degrading, improvement or replacement in wireless communication-based train control system of urban driverless transit, and investigate interoperable requirement from joint program of cooperation-"wireless communication-based train control system's standard process construction and performance evaluation on urban transit" of first year result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.189-191
• /
• 2009

Compatibility concerns between train signalling systems and rolling stock are a significant problems to cross-acceptance of rolling stock in urban railway system. In this paper, we measured the conducted emission flowing current through rails and analyzed results for DC rolling Stock.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1126-1131
• /
• 2008

In this paper we introduce an applicable RCM(Reliability centered maintenance) method for Track circuit equipment of AREX's Signalling System. AREX computerize all the process of FRACAS(Failure Reporting, Analysis and Corrective Action System)) by the Facility Management System of Integrated Information System. These datum were analysed and reproduced as the RAMS index value which can be used by maintenance staff for optimizing the maintenance method of the System.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1999-2004
• /
• 2009

Since 2003, the domestic ground signalling system of the Kyeongbu and Honam lines has been steadily improving with the introduction of the ATP system and application of the system to the train is actively being pursued for 2009 target. Therefore, new ground signalling systems are being installed to the trains and track conditions to control the train speed to a maximum of either 80km/h, 120km/h, 150km/h, or 160km/h. As well, considering safe breaking distance, block signalling has been installed and also the change over times of the track switching device has been adjusted according to the train speed. Since the new Tilting trains will be running faster than present trains, at speeds over 180 km/h, we anticipate that there will be problems with present signalling facilities. Therefore this paper attempts to examine the various problems with the interface between the ATP signalling system and the new Tilting trains and also it will propose the most effective operating plan based upon case studies of successful foreign operations.

• 한국철도학회논문집
• /
• 제16권6호
• /
• pp.460-465
• /
• 2013

고속철도에서의 열차무선전파는 일반적인 이동통신전파와 달리 레일, 침목 및 자갈로 구성된 철로면 반사에 의해 불규칙적으로 수신되는 지면반사파의 영향을 받는다. 본 논문에서는 이와 같이 불규칙적으로 수신되는 철로면 반사파를 랜덤변수로 모의하고, 여기에 송수신간 직접 경로에 의한 직접파를 추가한 열차무선 전파모델을 제안하였다. 제안한 전파모델을 이용한 시뮬레이션 결과 열차무선에서의 경로손실지수는 3.0으로 분석되어, 일반적인 이동통신환경에서의 4.0에 비해 경로손실이 감소하는 것으로 나타났다. 또한, 고속철도 현장에서의 열차무선 수신전력 측정치에서도 동일하게 경로손실지수가 3.0으로 분석되었다. 이상과 같은 시뮬레이션 및 측정결과로부터, 열차무선 전파모델을 검증하고 경로손실지수를 도출할 수 있었으며, 이 결과는 고속철도 열차무선통신망의 커버리지 예측 및 기지국 설계에 응용할 수 있다.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.1019-1023
• /
• 2014

The issue of safety insurance in PES(Programmable Electronic Systems) has been provoked because PES is difficult to define failure modes which are appeared in many different ways. But the PES applications extend rapidly in various areas. One of the solutions for PES safety insurance is voting which PES is used by comparing the outputs of several PES. The time synchronization of the PES is necessary for this reliable voting. The voting must be carried out with the outputs from same time inputs. There are several methods for time synchronization of the PES. In this paper, we discussed two modes of the time synchronization which are mutual synchronization of several PES and using UTC(Universal Time Clock).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1384-1386
• /
• 2000

To determine operational requirement, the environmental condition for an equipment must be investigated, and to certify equipment's normalized operation, appropriate test must be carried out under the considered environmental condition. The actual environmental conditions to which equipment is likely to be exposed are normally complex and will comprise a number of environmental factors and corresponding parameters, When defining the environmental conditions for a certain application it is, therefore, necessary to list the factors involved and select the appropriate severity. The operational environment is structured in two separate such as requirements, guidance and test specifications. For the preparation to determine operational requirement, operational environment of railway signalling equipment is investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.389-391
• /
• 2000

A representation technique of a given track topology is required by many software applications in railway technology such as signalling system simulator. To achieve these, the concept of double vertex graph architecture is proposed. These are composed of pairs of vertices and node between the single vertices. Double vertex graph architecture can be understood as a extension of classical graphs. In developed railway signalling simulation software, it is shown that track topology can be represented by proposed algorithm in a efficient way. Especially it makes sure that these are suitable technique for representing and implementing of switch, routes which can be introduced some mistake in classical graph algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.438-440
• /
• 2003

It is very important to ensure system safety during the process of developing a system. Railway system is also devoting a great portion for the safety. Nowadays many countries leading railway industry have their own system assessment process according to the situation of their train control system. In this Paper, several methods to derive Tolerable Hazard Rate are represented in the railway signalling system the characteristics of those methods are also considered respectively.