• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.850-855
• /
• 2006

Railway signal interlocking device with the reverse unit control device which is most important from country season, the subway and the high-speed railroad back, electric relay boarding and lodging accomplishes the master and servant and it comes and before from the Japanese back and an electronic interlocking device, a zone one interest in updated technology introduction Great Britain, Germany, Sweden and the United States, it quarrels about under developing it puts to practical use even from our country it shows. About reasoning lower our country subway or the country closing up shop stem there is not a possibility of throwing away the impression where the exhibition hall of foreign nation signal system is being turning out. Consequently is enormous a system well expense at the foreign corporation about under paying Oh!, it understands, with difficult always it is exposed to it is an actuality in the accident which is dangerous. In like this point of view first piece which is important securing safety of system from electronic anger of electronic interlocking device.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1616-1625
• /
• 2007

Recently, embedded systems role as control systems instead of mechanical control systems in many parts of vehicles. In cases that embedded systems are used controling the electric signal, it is important to secure the reliability of a software within embedded systems. In this paper, the test platform for securing the reliability and real-time characteristic of the embedded system that controls electric signal of All Wheel Steering Control System in a Bi-modal tram is proposed. The platform is built on a HIL (Hardware In the Loop) architecture. Through the HIL platform, various vehicle conditions, driver activities and environment conditions can be successfully tested without actual driving, hence improving the reliability of the embedded system for the All Wheel Steering Control System.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.915-921
• /
• 2005

Accurate and reliable tracking system is essential for the central train control system. There are two systems widely being used. one is the fixed block system which utilizes the track circuit for the detection of train position. the other is the moving block system which has the advantage over the former since it enables shorter radio signal for the train position detection. In this paper a new algorithm is proposed which uses signal's phase difference of arrival to detect the train position. Experimental verification of the algorithm is presented in the paper.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1205-1207
• /
• 2002

As going through technical transition of signal control logic to mechanic, electric, electronic etc., railway signalling system utilizing computer control technology has recently been developed and used since railroad service had been firstly started in 1825 by beginning that horseman kept red color sign and notified something wrong existence and nonexistence of front route to train driver in the Britain. In this paper, the domestic technical change process of signalling technology to be a basic of train control technology is discussed and then reviewed about technical trend of advanced nation's development.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.546-551
• /
• 2001

This paper considers the design technique of the real-time control algorithm to implement the electronic interlocking system which is the most important station control system in railway signal field. The proposed technique consists of the structure design and the detail design which are based on the ROOM(Real-Time Object-Oriented Modeling) This proposed technique is applied to the typical station model in order to prove the validity as verifying the performance of the modeled station.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.574-580
• /
• 2003

This research heightens use efficiency of existent train railroad equipment by maximum through communication based train control system, and because system that take advantage of new skill compares with safety of old signal system same or it that show that is high be. Examined MBS Embodiment method of most suitable by presenting calculation that find out location of train that this treatise runs free curved line department to embody MBS(Moving Block System) through communication

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.515-525
• /
• 2011

In this study, Urban maglev is applied to inductive-loop speed and position detection system for the top-level classification system for the entire system, and performed functional analysis On-board signal equipment, Wayside-signal equipment divided by the reliability, availability, maintainability, and safety through analysis of the proposed formula. RDB and by applying a system service for each device was calculated to availability, safety analysis. The PHA, FMEA, HAZOP over the Top Event of the FTA is performed by presenting the results. This also shows approach methods and relative activities for project to accomplish and ensure the system requirements.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1741-1744
• /
• 2003

This study is a kind of preliminary research in order to propose and suggest the plan of performance improvement for the speed-up through the examination of operational condition on the field for signal system facility on the conventional railway, in order to obtain the elemental technology from the technical development for utilization of high speed train which will be run on the Korea Conventional Line and, finally, in order to propose the specification of signal system using for high speed and the scheme of establishment for the optimal signal system.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.247-251
• /
• 2003

The velocity of train which is measured from pulse generator attached to TM is used for displaying or control signal of inverter and so on. Measured signals increase and decrease step-by-step by pulse counting or monotonously by F/V conversion. But noises and signal distortions by measuring error like alias make it difficult to provide correct velocity infomation and estimate the acceleration. In this paper, we investigated the performance of Smoothing method for suppressing the noises in velocity signals. And the difference between Smoothed signal and origin velocity signals is inspected and the comparison with low pass filtering show applicable of Smoothing method for noise rejection and the estimation of signal. Finally, acceleration curves estimated from Smoothing method are compared with real accelerator signal attached to train.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.427-435
• /
• 1998

In this paper will be presented an algorithm for designing of a railway interlocking table which is a document describing the functional specification of the interlocking device. The ability to produce an interlocking table has been handed down in the signalling engineers society. And the signalling engineer makes the most of his expertise to produce an interlocking table. But, the expertise has not yet been organized into technical system, the core of the expertise is a hard nut to crack. Therefore, we analyze into signal engineering expertise, and propose a generalization of interlocking notion. Also, an algorithm is drawn up based on a train route setting principle to solve practical and general problems by computer And the performance of the algorithm is evaluated for test program based on AutoCAD technology. The evaluation result shows that it can be utilized as the effective algorithm for computer control of the signalling system as interlocking device, that it improved in safety