• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1180-1187
• /
• 2004

Relative displacements between decks should be within the allowable limit under horizontal forces in high-speed railway bridges. Longitudinal force transmitters(LFT) have been introduced ih high-speed railway bridges for test track. The horizontal forces on the pier supporting the fixed bearing are transmitted to the near piers supporting the sliding bearings by LFT, The performance of LFT was investigated by field test in which the braking and acceleration tests using KTX were conducted in Baebang viaduct. The relative displacements between decks were measured infield test and were compared with the numerical results and the allowable limit.

• Journal of the Korean Society for Railway
• /
• v.8 no.3
• /
• pp.276-285
• /
• 2005

This study discussed the effect on rail's axial force due to thermal and seismic loads according to supporting conditions of railway bridges; the considered supporting conditions are 1)simply supported, 2)roller at both ends, and 3)roller with horizontal spring at both ends. Closed form solutions are used to calculate the axial farces on rails. The roller at both ends of a bridge span decreases the compressive axial force on rail due to thermal load compared with the simply supported condition. However, the lateral springs at roller are not helpful to decrease the rail's compressive axial force.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1450-1459
• /
• 2007

Line type rigid bearings for Open-Steel-Plate-Girder railway bridges have several problem in service, and they are unstable structurally. Thus, spherical bearings having advanced maintenance capability and device to resistance up-lift are developed and replace the existing ones. A experiment of maintenance for a new placed spherical bearings under real Open-Steel-Plate-Girder bridge is conducted and their good maintenance performance is proved. The dynamic behavior of the bridge is measured and analyzed for the two cases of the existing and replacing bearings. Therefore, the effect of the new spherical bearings on the railway bridge is assessed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.894-899
• /
• 1998

To absorb the deformation of live load, thermal gradient, shrinkage and creep in bridge structures and general structures, expansion joint has to be established. Especially expansion joint for high-speed railway bridge has to accomodate the static and dynamic forces and it not only has the durability of itself but also maintain the durability of structure by preventing the leakage of water. The actual used product of expansion joint for high-speed railway bridge is only ones made in France, Germany and Japan. In this study, the development process and test results of developed expansion joint are introduced which has the functional operation and durability enough to apply to high-speed railway bridges, roadway bridges and general structures. The tests consist of fatigue-durability test of 3 million times by high-speed rail load, leakage test and jack-up test for verifying the possibility of exchanging it. The performance of developed expansion joint satisfy the specification of Korea High Speed Rail Construction authority.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1203-1208
• /
• 2005

This study is the evaluation of rating of railway prestressed concrete beam bridges by prediction of residual effective prestress force. Therefore, developed prediction method is based on the center camber of prestressed concrete beam, structural design report of various PSC beams, construction reference materials of PSC beams. Both rating evaluation and residual effective prestress force by developed method is compared with evaluation by structural design. This comparison results shows that this developed method is very effective method. Therefore evaluation of rating by prediction of residual effective prestress force will be used for evaluation of the rating of railway PSC beam bridges.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.24-29
• /
• 1998

To absorb the deformation of ,external live load, thermal gradient, shrinkage and creep in bridge structures and general structures, expansion joint has to be established. Especially expansion joint for high-speed railway bridge has to accomodate the static and dynamic forces and it not only has the durability of itself but also maintain the durability of structure by preventing the leakage of water. The actual used product of expansion joint for high-speed railway bridge is only ones made in France, Germany and Japan. In this study, the development process and test results of developed expansion joint are introduced which has the functional operation and durability enough to apply to high-speed railway bridges, roadway bridges and general structures. The tests consist of fatigue-durability test of 3 million times by high-speed rail load, leakage test and jack-up test for verifying the possibility of exchanging it. The performance of developed expansion joint satisfy the specification of Korea High Speed Rail Construction Authority.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.320-328
• /
• 2011

The down town passage segment which follows in the straight line which follows recently in high speed of the railway and rail construction is increasing. Also according to quality of life improvement of the citizens whom follows in national income increase the resident demand only becomes larger day by day about a environmental creation which is comfortable and house environmental etc. Demand of the citizens is not the problem of today yesterday about like this railway mean of transportation and with the fact that continuously will increase in future. This study is to predict and reduce railway noise from the conventional PSC-beam bridges which passes through urban areas under the government strateges of speed and weight increases of railway. The purpose of this study is to recommend a proper noise prediction method for designing pleasant roadside environments. The railway design including existing line reconstructions should minimize curved alignment to increase train speed to 180~200km/hr under the government's long-term planing such as the 4th Comprehensive National Development Plan (2000~2020), National Intermodal Transportation Plan (2000~2019) and National Railroad Network Establishment Plan (2006~2015), Since the PSC-beam bridges are mainly used for bridge structures urban areas, noise measurements were performed and analyzed to recommend the noise prediction methods for each type and speed of train respectively.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1037-1043
• /
• 2007

The railroad systems with the ballast tracks have been widely used for a long time. But recently, the use of the slab track is being increased gradually with a technical developments. So, this paper deals with the appliance of the slab tracks on the railroad bridges. Firstly, review the design criteria of the railroad bridges related to the slab tracks for the stability and serviceability, based on DIN and EURO code. Then, perform the analysis of the railroad prestressed concrete bridges, and check whether the results of the analysis satisfy the design criteria. Finally, find the construction condition of bridges that all the design criteria are satisfied. As a result, to maintain the stability and serviceability of the bridges, bridges must have some restrictions, including a time of installation of the slab tracks. So, the construction schedule for the erection of the bridges will be carefully considered in case of the concrete railroad bridges with the slab tracks.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.797-803
• /
• 2010

A dynamic analysis procedure is developed to provide a better estimation of the dynamic responses of pre-stressed concrete (PSC) box girder bridges on the Korea high speed railway. Particularly, a three dimensional numerical model including the structural interaction between high speed vehicles, bridges and railway endures to analyze accurately and evaluate with in-depth parametric studies for dynamic responses of bridge due to the high speed railway vehicles. Three dimensional frame element is used to model the PSC box girder bridges, simply supported span lengths 40 m. The high-speed railway vehicles (K-TGV) including a locomotive are used as 38-degree of freedom system. Three displacements (vertical, lateral, and longitudinal) as well as three rotational components (pitching, rolling, and yawing) are considered in the 38-degree of freedom model. The dynamic analysis by Runge-Kutta method which are able to analyze considering the dynamic impact factors are compared and contrasted. It is proposed as an empirical formula that the impact factors damaged the bridge load-carrying capacities occurs to the bride due to high-speed vehicle.

• Steel and Composite Structures
• /
• v.37 no.3
• /
• pp.291-306
• /
• 2020

The noise from the elevated lines of rail transit has become a growing problem. This paper presents a new method for the rapid prediction of the structure-borne noise from steel or composite bridges, based on the receptance and Statistical Energy Analysis (SEA), which is essential to the study of the generation mechanism and the design of a low-noise bridge. First, the vertical track-bridge coupled vibration equations in the frequency domain are constructed by simplifying the rail and the bridge as an infinite Timoshenko beam and a finite Euler-Bernoulli beam respectively. Second, all wheel/rail forces acting upon the track are computed by taking a moving wheel-rail roughness spectrum as the excitation to the train-track-bridge system. The displacements of rail and bridge are obtained by substituting wheel/rail forces into the track-bridge coupled vibration equations, and all spring forces on the bridge are calculated by multiplying the stiffness by the deformation of each spring. Then, the input power to the bridge in the SEA model is derived from spring forces and the bridge receptance. The vibration response of the bridge is derived from the solution to the power balance equations of the bridge, and then the structure-borne noise from the bridge is obtained. Finally, a tri-span continuous steel-concrete composite bridge is taken as a numerical example, and the theoretical calculations in terms of the vibration and noise induced by a passing train agree well with the field measurements, verifying the method. The influence of various factors on wheel/rail and spring forces is investigated to simplify the train-track-bridge interaction calculation for predicting the vibration and noise from steel or composite bridges.