• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2016

Railroad bridges account for 25% of the entire high-speed rail network. Railway bridges are subject to gradual structural degradation or fatigue accumulation due to consistent and repeating excitation by fast moving trains. Wireless sensing technology has opened up a new avenue for bridge health monitoring owing to its low-cost, high fidelity, and multiple sensing capability. On the other hand, measuring the transient response during train passage is quite challenging that the current wireless sensor system cannot be applied due to the intrinsic time delay of the sensor network. Therefore, this paper presents a framework for monitoring such transient responses with wireless sensing systems using 1) real-time excessive vibration monitoring through ultra-low-power MEMS accelerometers, and 2) post-event time synchronization scheme. The ultra-low power accelerometer continuously monitors the vibration and trigger network when excessive vibrations are detected. The entire network of wireless smart sensors starts sensing through triggering and the post-event time synchronization is conducted to compensate for the time error on the measured responses. The results of this study highlight the potential of detecting the impact load and triggering the entire network, as well as the effectiveness of the post-event time synchronized scheme for compensating for the time error. A numerical and experimental study was carried out to validate the proposed sensing hardware and time synchronization method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.893-895
• /
• 2014

Railway dedicated frequency bandwidth allocation matters are being discussed actively before an introduce of wireless communication based train control system to korean railway industry. Allocating the frequency band, which has great value as a public resource, for suitable use with right amount is particularly important, because of equity in other fields and valuable use of limited resources. In this paper, the feasibility about stable railway communication network operation based on LTE in diverse frequency bandwidth will be discussed with solicitous simulation.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.902-908
• /
• 2009

TETRA is the standard of Digital Trunked Radio System developed by the ETSI (European Telecommunications Standards Institute). It is currently adopted as Electric Power IT Wireless Backbone Network in Korea, and a national enterprise is going on for versatile utilization of TETRA. To use TETRA wireless network, TETRA modem is very necessary such that performance measurements are very crucial for each TETRA modem by various manufacturers. In this paper, PED (Protocol Evaluation Data) is suggested for PD performance measurement in D-TRS wireless network environment. The performance measurements for different data lengths and transmission intervals are done using TG (Traffic Generator) on Test Bed. The data size is increased by 10 bytes from 10-byte to 400-byte, and it is measured 1,000 times for each transmission interval of 0.5, 1.0, and 1.5 seconds. Based on the transmission time measured, average transmission speed and MER (Message Error Rate) are derived for TETRA Modem performance measurement. Two TMR880i's of EADS are used for TETRA modem, and SwMI (Switching and Management Infrastructure) of EADS is used for switching system in this paper.

• Journal of Communications and Networks
• /
• v.4 no.4
• /
• pp.292-301
• /
• 2002

Wireless LAN technology is complementary to 3G systems and could be used to provide high bandwidth hotspot coverage, for example in railway stations and offices, in order to provide the high bandwidth video and broadband services such as those emerging on DSL fixed access. The IST Projects BRAIN and MIND have investigated a number of key technical enablers for such a system beyond 3G. These include scenarios and business models, design of an all-IP access network, consideration of ad hoc network extensions, enhancing Wireless LAN efficiency and compatibility with IP and, finally, terminal middleware and signalling for rapid adaptations to network QoS changes.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1695-1700
• /
• 2011

In this paper, we introduce the network infrastructure in an advanced emu test line in Deabul. New technology has been applied to advanced EMU(DMU, integrated broadcasting system, black box and etc). In order to efficient and safely test of new developed train, failure, operation, status of test line and weather information should be monitored in real time. We has implemented a wireless and optical network infrastructure for reliability and scalability. The wireless communication capability between a car and ground is 20Mbps and back-hole network has 50Mbps of the communication performance. The network between test tracks and control office was established in the optical network. That can improve communication reliability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.5
• /
• pp.713-718
• /
• 2014

DC urban railway power system consists of DC power network and AC power network. The DC power network supplies electric power to railway vehicles and the AC power network supplies electric power to station electric equipment. Recently, because of power consumption reduction and peak load shaving, intelligent measurement of regenerative energy and renewable energy adapted on DC urban railway is required. For this reason, DC smart metering system for DC power network shall be developed. Therefore, in this paper, DC voltage sensor, current sensor, and DC smart meter were developed and evaluated by performance test. DC voltage sensor was developed for measuring standard voltage range of DC urban railway, and DC current sensor was developed as hall effect split core type in order to install in existing system. DC smart meter possesses function of general intelligent electric power meter, such as measuring electricity and wireless communication etc. And, DC voltage sensor showed average 0.17% of measuring error for 2,000V/50mA, and current sensor showed average 0.21% of measuring error for ${\pm}2,000V/{\pm}4V$ in performance test. Also DC smart meter showed maximum 0.92% of measuring error for output of voltage sensor and current sensor. In similar environment for real DC power network, measuring error rate was under 0.5%. In conclusion, accuracy of DC smart metering system was confirmed by performance test, and more detailed performance will be verified by further real operation DC urban railway line test.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.534-539
• /
• 2013

The research about the Korean integrated wireless network for railways is in progress. The network integrates and complements the various railway functions. In addition, the network is trying to change from wire communication to radio communication. The activities for the railway frequency acquisition are also in progress for the implementation of the network. This paper analyzes the problems for the Korean railway communication networks. The problems revolve around the dispersed network structure, the limited functions, the different communication methods, the technology limitation for the communication methods, and the usage of the non-licensed band. Subsequently, we explain the current state and trend for the foreign communication of the railways. This paper suggests improvement plans for the problems and also explains the expected efficiency for the improvement plans.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1756-1760
• /
• 2008

In this study, it was suggested how to monitor the air quality with use of intelligent wireless sensor network in the subway station. When Zigbee-based ubiquitous sensor network was used, smaller budget was required in configuring the system compared to existing air-quality monitoring method and this system may easily be configured due to easy installation of communication cables. The study will be continued to supplement the network systems currently installed in subway stations and the completion of development of this system is expected to make a large contribution in improvement of indoor air quality.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.689-694
• /
• 2006

Wireless LAN is getting more popularity and plays a main role in electronic and telecommunication field. Wireless LAN is more convenient than wired LAN when mobility is required, and are sometimes the only feasible choice. Wireless LAN can also pose a significant security risk when not properly installed and maintained. Thus, this paper studies real-time message transmission using existing mobile telecommunication network and describes considerations and procedures when introducing wireless LAN concept and wireless LAN systems. It also studies integrated wired and wireless networking including wireless LAN bridge and AP technology of International Organization for Standardization, and especially real-time dynamic image data transmission in a moving train.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1106-1111
• /
• 2010

Conventional traffic network in the urban city has been constructed and operated under systems to collect and transmit based on the roadside AP(Acess Point). But This paper has investigated the new traffic network based on smart station which combined the power network. Futhermore, the smart station can collect and transmit the variable informations and functions that supply the vehicle moving lines, informative collector service and center interoperation etc.