• 전기학회논문지
• /
• 제59권1호
• /
• pp.76-81
• /
• 2010

This paper describes the development of integrated simulator with GUI(Graphic User Interface) for traction power supply system. This simulator consists of a lot of calculation modules such as TPS, train time schedule, line constant, and power supply system analysis. Each module has input and output structure respectively. The algorithms of all modules have confirmed the validity to comparison with field test that is performed on both high speed railway line and conventional line.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.883-887
• /
• 2016

The power supply system in Korean electrified railway has adopted AT feeding. If a fault occurs in some substation for any reason, the vicinity substation must feed electric power on the outage substation through catenary. So, the feeding distance grows twice of the normal state at extended feeding condition. If substation's feeding distance is longer than normal condition, the catenary impedance and train to supply electric power from the substation. Therefore, the severe voltage drop can occur and power supply shall be not allowed. This paper presents the model of compensator against voltage drop using multi-port network algorithm. Whole traction power supply system can be analyzed with this model. Computer simulation including this model is performed based on real train schedule and increased schedule in case studies.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.163-168
• /
• 2010

Recently, there are many problems of service qualities such as regular-rapid-safe -comfortable transport, that was traditionally advantages in urban railway transportations. These problems cause train delays that affects consecutive schedule, capacity, operation plans, and it is hard to prevent the propagation of delay and find the recovery solution. Because the urban transport demands is continuously increased and the railway service is also expanded, the railway operation company makes efforts to improve operation performance and efficiency for passengers. In this paper, we analyse the issues and problems existing in the major operation line of high-density urban railways, and suggest the development direction of intelligent operation technology to improve the urban railway service by minimizing the occurrence and propagation of delay. And the result of numerical case study is also presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1275-1281
• /
• 2011

Most of the railway traffic control systems are using in the DBMS(Database Management System)is a disk-based DBMS. When the train schedule and the event data is inputted and referred at real time on Disk-based DBMS, it is characteristic of the slow access time and the data is preserved permanently. For this reason, this paper suggests the way of improving for Railway Traffic Control System by the hybrid DBMS using a combination of memory and disk. We apply the Hybrid DBMS to Railway Traffic Control System and compare the existing method with suggested one using the same data. As a result of comparison, we have come to the conclusion that suggested method is far more performance to shorten data access time and process a mass information than the previous methods.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.91-98
• /
• 2007

Community noise has been serious social issues in Korea. This paper reviews current statistics and status on railway noise, with practical engineering tools in order to reduce the noise level from railway traffic noise sources. At the beginning, guidelines of the current environmental policy are discussed, with the new policy on railway noise to be enforced beginning in 2007 with 5 year schedule. Then, a noise reducer is proposed as a tool to reduce noise levels protecting people living near at the railway. Details on the acoustic effect in field test are discussed with the result of implementation in the street. We propose noise reducers as an effective and practical tool for the people who are exposed to rail traffic noise in cities.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1324-1332
• /
• 2008

The change of the transportation circumstance related to the deep environmental pollution, escalation of the energy price, increasing social cost of the congestion and traffic accident, improving a income level, advanced social structure etc, is rapidly proceeded. For the corresponding this transportation circumstance, the role of the railway is being increased and that is friendly with environment, efficient for the energy, observed the time schedule and the transportation device which is high speed and safe mass transportation. In addition, government's R&D investment is being increased according to deeping a strength of the international competitiveness through the technical innovation. So railway's R&D investment is being increased. Accordingly, This study suggest improving a fruit of the R&D related to railway R&D system for a efficient R&D investment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.41-46
• /
• 2002

This paper deals with the exchange of tourists and the operation of sightseeing train encouraged by the inter- Korean cross-border railway project. First of all, how the inter-Korean cross-border railway project has developed will be discussed. After this, tile present tourism state, facilities, the state of railways and roads of North Korea, and major tourist attraction around the Kyonguisun will be shown. And then, several aspects on the agreements between the Korean National Railroad (KORAIL) and North Korean railroad system will be summarized. And, finally, the economic effect of the line including the operation schedule of the Kyonguisun sightseeing train, the demand forecast, the computation of railway fare, and profit sharing will be depicted.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.211-214
• /
• 2004

In railway system, the transportation plan corresponds to master plan for transport services. This service plan must be constructed to minimize operational cost or maximize revenue considering transportation demands and resource capacities in the operation company, and includes several sub-planning activities such as train operation frequency plan, train (schedule) plan, train capacity assignment plan, and rolling stock requirement plan. In this paper, we present profitability evaluation system for current transportation plan. The proposed system can be used for evaluating profitability by estimating train service revenue considering customer demands.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.66-71
• /
• 2001

Most payments in domestic construction are issued in lumpsum unit price contracts according to the completed construction rate. This method generates problems in losing time and increased costs for the owner and contactor. In overseas projects, payments are issued in accordance to completed milestones. The milestones themselves base on the original schedule and allow effective schedule management on the tasks. In domestic construction, however, introduction of milestone payments requires enhanced management capability of owners and contractors. Hence, this study investigating how to activate schedule management devices to analyze progress payments in domestic construction.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1132-1137
• /
• 2008

Automatic Operation based on ATO (Automatic Train Operation) is necessary for driverless Light Rail Transit business. When this kind of driverless LRT operation plan is made, TPS (Train Performance Simulation) is traditionally simulated at all-out mode and coasting mode based on manual operation. Commercial schedule speed equals to all-out speed minus $9{\sim}15%$ make-up margin. Coasting mode TPS simulation is also run at commercial schedule speed to calculate run time and energy consumption. But TPS based on manual operation should make an improvement on accuracy in case of driverless LRT operation Plan. In this paper, new fast mode TPS simulation using ATO pattern is proposed and show near actual ATO result. The actual ATO pattern can be accurately simulated with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. Normal mode TPS simulation for commercial schedule speed can be designed to have fast mode trip time plus 3 seconds/km margin recommended by korean standard LRT specification.