• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3557-3566
• /
• 2015

궤도가 역사의 상부에서 연결되는 선하역사 형식의 경우 일반 역사 구조형식과 달리 진동이 직접 전달되는 구조적 특성으로 인하여 진동 및 소음레벨이 타 형식의 역사와 대비하여 상대적으로 높은 상황이다. 따라서 구조물 진동과 이로 인해 발생되는 구조물 기인 소음에 대한 특성 파악과 그 결과를 활용한 저감 방안의 수립이 필요하다. 본 연구에서는 기존 슬래브와 진동을 절연시키는 구조형식의 플로팅 슬래브에 대하여 외력에 의한 가진 시 발생하는 구조적 진동과 이로 인한 구조물 기인 소음의 상관성을 고찰하고자 실험과 해석을 수행하였다. 표준형 및 플로팅 슬래브를 제작하여 가진함으로써 진동응답과 소음을 계측하였고, 수치해석, 유한요소법과 SEA 기법을 활용하여 시뮬레이션을 수행하였다, 실험 및 해석을 통하여 슬래브의 동적 구조적 특성, 구조물 진동과 소음의 상관성, 플로팅 슬래브의 저감 효과 등에 관한 결과를 도출하였다.

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.122-127
• /
• 2008

The source of wayside noise for the train are the aerodynamic noise, wheel/rail noise, and power unit noise. The major source of railway noise is the wheel/rail noise caused by the interaction between the wheels and rails. The Structure borne noise is mainly a low frequency problem. The train noise and vibration nearby the elevated railway make one specific issue. The microphone array method is used to search sound radiation characteristics of elevated structure to predict the noise propagation from an elevated railway. In this paper, the train noise and structure borne noise by train are measured. From the results, we investigated the effect on the sound absorption tunnel for elevated railway.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1011-1016
• /
• 2010

The noise emitted during train operation is generated with various reasons. It is known that the major noise generation is classified according to the ranges of train speed; that is, engine noise at lower speed range, rolling noise at medium speed range, and air-borne noise at higher speed range. These noises are transmitted in combined form with the noises generated from track components and under-carriage, etc. The rolling noise as a major noise at medium speed range is caused by the vibration occurred at wheel/rail interface. The vibration occurred at wheel/rail interface is transmitted to wheel and rail, and this vibration is emitted from wheel and rail as a noise. The object of this study is to investigate the effect of wheel damper of low noise wheel. In this study theoretical and experimental analysis is performed by numerical model calculations and impact test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.82-83
• /
• 2008

In the cases of high speed railway bridge, dynamic behavior analysis is important because of high passing velocity and moving load at the regular intervals, and the damping ratio is a major element in dynamic behavior analysis. In this paper, damping ratios were estimated by two methods and vibration type sections, and relationship between estimated damping ratio and representative value of bridge vibration. At the results, estimated damping ratio using all time of vibration were more stable then using only free vibration section. And in the case of using extended Kalman filter, estimated damping ratio were trend of growth by growth of representative value of bridge vibration. At last, it was shown that study about reliabilities of estimated damping ratios were need.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.369-374
• /
• 2007

This paper presents yaw vibration control performances of railway vehicle featuring controllable magnetorheological damper. A cylindrical type of MR damper is devised and its damping force is evaluated by considering fluid resistance and MR effect. Design parameters are determined to achieve desired damping force level. The MR damper model is then incorporated with the governing equations of motion of the railway vehicle which includes vehicle body, bogie and wheel-set. Subsequently, computer simulation of vibration control via proportional-integral-derivative (PID) controller is performed using Matlab. Various control performances are demonstrated under external excitation by creep force between wheel and rail.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.444-449
• /
• 2005

In Seoul, several railway depots are located at the places where a public can easily access. Since a depot occupy a large amount of land itself, it is natural to use those sites for a public building construction such as an apartment complex or a transportation terminal, as an example. Most of the buildings on a depot, however, are exposed to vibration problems, because foundations are excited from the dynamic loading whenever heavy trains pass on the track. Severe vibration may cause a damage to building structures and a troublesome to a community. In this paper, some vibration practices have been examined in order to resolve the vibration problems. First, a critical speed of a train in a railway depot is evaluated. Then, a structural effect on the transmission of a vibration energy has been investigated. Finally, practical approaches to reduce the vibration level have been proposed. In this first half part of the paper, the focus has been on the critical speed and a structural transmission phenomena.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.505-506
• /
• 2012

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.239-240
• /
• 2012

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.768-769
• /
• 2009

• 한국소음진동공학회논문집
• /
• 제23권10호
• /
• pp.878-884
• /
• 2013

The center of gravity and the moment of inertia of railway vehicles are important parameters for running safety and stability in railway vehicle design. However, the exact measurement of those is difficult in manufacturing field. The weight measurement of a railway vehicle beneath the wheel using a weight scale is off by a large amount. This paper suggests a measurement method for the center of gravity and the moment of inertia of railway vehicles using vibration. For the measurement a railway vehicle is suspended using four wires. Direct measurement of the tension of the wires and the period of swinging motion of the suspended railway vehicle with calculations give the exact location of the center of gravity and the moment of inertia in x, y, and z directions, respectively. This implementation was demonstrated using an experimental device and verified numerically.