• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.330-337
• /
• 2010

This paper shows an algorithm for identifying track irregularities using wavelet transfer function along the railway. An equivalent SISO wavelet transfer function is defined using continuous wavelet transform by the measured track geometry and acceleration at a bogie of a train. The estimated track geometry is made by inverse continuous wavelet transform from the regressed signals of measured acceleration signal and the pre-defined wavelet transfer function. The estimated rail irregularity geometry is evaluated by the coherence function and comparison of FRF(Frequency Response Function). As a result of evaluated outcome, This algorithm is regarded as appropriate for estimation of rail irregularity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.272-277
• /
• 2007

Generally railway vehicle runs on the rail with endless interaction between wheel and rail. Irregularity of rail causes the periodic motion of the vehicle. In association with this motion, the design of vehicle would be carried out in order to avoid the resonance between car-body and bogie. It may be seen that the first vertical bending mode of car-body contributes considerably to the vertical ride comfort level. In this paper to know the effect of the car-body first vertical bending mode on vertical ride comfort, the mode has been considered with dynamic model. I-DEAS program was used to get the car-body first vertical bending mode and VAMPIRE program was used to analyze ride comfort index(Wz) with FE interface file.

• 한국철도학회논문집
• /
• 제2권4호
• /
• pp.1-8
• /
• 1999

A formulation to perform static equilibrium and linear vibration analysis is presented in this paper. The formulation employs minimum number of equations of motion which are derived by using a partial velocity matrix. The static equilibrium analysis is performed first, then the linear vibration analysis is performed at the static equilibrium position. By using the formulation presented in this paper, static equilibrium and linear vibration analysis of a high speed electric train system are performed. A single bogie system, a power car vehicle, and a train system which consists of five vehicles are analyzed, respectively. Natural frequencies and a few lowest mode shapes of the two are identified in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.36-41
• /
• 2003

Among welded structure bogies in use for high speed freight car, a part of bogies manufactured in 1999 and 2000 have found problems that failure occurs in its end beam. In case of a freight car a difference of weight between empty and loading conditions are worse than in case of a passenger car. Moreover its brake system is tread brake without second suspension system. A failure of end beam is supposed to be due to loading by brake rather than vertical loading by freight. This failure can make brake system useless and may be a cause of derailment in the worst case. In this study, we have proposed a simple torsion-free brake shoe holder hanger to remove torsion of hanger bracket which is supposed to be one of causes of failure and performed finite element analyses for making trial manufactures and its application.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.103-108
• /
• 2003

Among welded structure bogies in use for high speed freight car, a part of bogies manufactured in 1999 and 2000 have found problems that failure occurs in its end beam. In case of a freight car a difference of weight between empty and loading conditions are worse than in case of a passenger car. Moreover its brake system is tread brake without second suspension system. A failure of end beam is supposed to be due to loading by brake rather than vertical loading by freight. This failure can make brake system useless and may be a cause of derailment in the worst case. In this study, in order to be proved the cause of failure and to solve the problem it is described that we have measured load history acted on end beam and set up the procedures.

• International Journal of Railway
• /
• 제3권3호
• /
• pp.90-94
• /
• 2010

In this paper, driving functions of the Korea High-speed Trains were decomposed based on systems engineering architecture. In order to analyze the driving function, various systems engineering tools and methods were used. Moreover, interfaces of decomposed driving functions were analyzed to figure out purposes of the driving functions. Through activity modeling of driving function of the Korea High-Speed Trains, main functions were derived when starting, speeding and stopping. When the high speed train is speeding, pre-departure checks and wheel slide prevention are essential driving activities for the safety and when the high speed train runs high speed, maintaining driving stability by monitoring bogie hunting and monitoring drivers' safe operation by vigilance systems is important. Furthermore, when the train is braking, the driver should checks brake and suspensions as safety actions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.602-605
• /
• 2008

Recently, it has been trending toward speed-up not only in the passenger car but in the freight car. In this paper, the trend of the market demand for the technology of railway freight cars and the development direction of other country or company were studied by analysing the patent map. The effort for developing the technology is it seems to be more strengthened especially in the parts of bogie, brake, suspension. The increasing rate of the number of patent application from the United States of America is noticeable. The results of this paper can be used for making the development plans of competitive technologies and benchmarking of them.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.709-716
• /
• 2016

고속열차의 공기저항 저감을 위해 KTX-산천의 구성요소별 공기저항을 상세하게 분석하였다. 전체 공기저항의 약 42.9%는 동력차(선두차, 후미차)에서 그리고 약 10.1%는 대차에서 유발되는 것으로 나타났다. 전두부의 공기저항 저감을 위해 Broyden-Fletcher-Goldfarb-Shanno 기법을 이용한 전두부 최적설계를 수행하였다. 그리고 차체 공기저항 저감을 위해 동력차 형상 변화 및 대차커버를 적용하였다. 공기저항 저감을 위해 최적설계된 편성열차의 공기저항은 KTX-산천 대비 약 15.0% 저감되었으며, 주행저항은 속도 350km/h에서 약 12% 감소될 것으로 예상된다.

• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.678-686
• /
• 2009

국내에서 개발된 한국형 틸팅열차는 현재 시제차량 제작을 마치고, 충북선을 시작으로 시운전 시험이 단계적으로 진행되고 있다. 시운전 시험에서는 한국형 틸팅열차의 시스템 안정화를 위해 차량 외에 궤도, 구조물, 전차선, 신호 등 각 시스템 상호간의 인터페이스 검증이 필요하며, 선로구축물 분야에서는 개발차량의 증속이 궤도구조에 미치는 영향을 비롯한 궤도부담력 검토를 통해 궤도구조의 안정성과 주행안정성 평가가 수행되어야 한다. 따라서 본 연구에 서는 완화곡선구간을 주행하는 틸팅차량(한빛200호), 고속차량(KTX) 및 일반차량(무궁화)에 의해 궤도에서 발생하는 동적 윤중 및 횡압을 측정하였다. 측정데이터를 통해 차종별 주행패턴을 비교하고 윤중과 횡압의 증감율을 확률적으로 분석하였다. 분석결과, 고정식 대치구조를 갖는 기존 차량의 캔트변화에 따른 발생 윤중 및 횡압의 분포범위는 일정 범위 내에서 작은 편차로 분포하였다. 반면 진자식 대차구조인 틸팅차량의 경우 캔트변화에 따른 차체의 틸팅작용에 의해 비교적 넓은 범위에 큰 편차로 궤도작용력이 분포하는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.951-956
• /
• 2011

As the evaluation of loading characteristic on tilting mechanism is the most important one of the function test of tilting mechanism, the changing characteristic of load must be investigated on tilting of carbody for both the static and running condition of train. In this study, we reduced the load of tilting mechanism by adjusting the interface of carbody and bogie such as the weight balance, level of underframe, height of leveling valve, height of axle box and center position of tilting actuator with the characteristic curve of load for optimal condition of the tilting mechanism obtained in the previous study. Furthermore, the factor and effect of the interfacial structures respecting the load of tilting mechanism was evaluated by analyzing the changing characteristic of load obtained in the process of adjustment of interfaces. From these data, we will propose the maintenance standards for interfacial structures and tilting mechanism in order to minimize the load of tilting mechanism by analyzing in detail the characteristic of load for the main factors of the interfacial structure effecting on the load of tilting mechanism.