• 한국시뮬레이션학회논문지
• /
• 제29권4호
• /
• pp.85-94
• /
• 2020

철도교통사업의 계획 및 시행 가능 여부를 판단 하는 데 있어, 다양한 의사결정 과정이 필수적으로 요구되며, 그 결과로 총사업비, 운영비 등을 포함한 LCC(Life Cycle Cost) 값을 예측한다. 본 연구에서는 철도교통사업 의사결정 및 LCC 도출과정을 지원하기 위한 모델링 및 시뮬레이션 기반의 분석 방식을 제안한다. 먼저, 수치적 데이터 기반의 분석이 가능하도록 기존 다양한 철도교통사업 자료를 취합하여 Cost Analysis 모델을 구성하였으며, 실험계획법 및 반응표면법 기반의 근사모델링 기법을 통해 시뮬레이션을 수행, 결과를 도출하여 분석하였다. 모델 구성 및 시뮬레이션을 효과적으로 수행하기 위해 전문적인 상용 소프트웨어 도구를 사용하였다. 연구 결과 검증을 위해 실제 추진되고 있는 철도교통사업을 선정하여 분석결과를 비교하였고, 이를 각 분야 전문가 검증 과정을 거쳐 연구 성과의 신뢰성을 검토하였다.

• 한국컴퓨터정보학회논문지
• /
• 제27권1호
• /
• pp.157-166
• /
• 2022

본 연구는 철로 복합화물 운송 시 환적 작업으로 인해 발생하는 소요 시간과 비용을 줄이고 운송속도 향상이 가능한 피기백시스템의 도입 타당성을 분석하는 것을 목표로 한다. 이를 위해 국내외 문헌검토를 통해 타당성 분석방법론을 검토한다. 타당성 분석 값을 정량적으로 도출하기 위해 교통 데이터베이스를 적용하여 운송거리가 200KM이상인 주요 화물 운송 O-D 노선에 화물 운송 시뮬레이션 모델과 운송 수단별 화물 수요 예측 모델을 개발하였다. 2025년 주요 화물 운송 O-D 노선에 피기백시스템이 도입된다는 전제로 분석기간을 15년으로 설정하여 경제적 타당성을 분석한 결과 NPV 값이 양수이고 B/C값이 1.18로 도출되어 피기백시스템이 경제성이 있는 것으로 나타났다. 제안된 연구 방법은 철도운송의 경쟁력을 향상할 수 있는 교통 정책 수립에 유의미한 자료가 될 수 있다.

• 대한인간공학회지
• /
• 제30권1호
• /
• pp.237-250
• /
• 2011

The train transportation has a lot of advantages-energy efficiency is high, it is eco-friendly, safety is better than normal roads and it is possible for people to arrive on time. In these days, the valuation of ride comfort, which is only limited to road transportation, is newly recognized in order to having competitiveness from other transportation. Especially, in the development of the Korean high-speed railroad business, the ride comfort enhancement of train is very important problem to be solved. Currently, there are international standards of ride comfort such as UIC13, ISO2631. In Korea case, although it has own standard like KS R9216, it mainly depends on the physical parameter such as vibration and noise. So recently, in the valuation of ride comfort, the movements of living parameter technique introduction are increasing on the base of Japan and many developed countries of Europe techniques. Presently, the method of train ride comfort is mainly based of vibration, that is, mechanical parameter adding selection of variable acceleration and noise. This paper would like to show biological parameter; heart rate and blood pressure variation. This method is more direct, based on human body response, than mechanical parameter method. In this experiment, the variability of heart rate and blood pressure of passengers according to tilting angle change of Train, the Korean tilting train, we are supposed to know that the extent of tilting on the simulation has influence on variability of heart rate and blood pressure, which are living parameter of heart's blood.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.828-830
• /
• 2009

In Korea, various efforts to cope with the Post-Kyoto system have been recently performed because a duty for the GHG(Greenhouse Gas) reduction may be allocated from 2013. Especially, the role of railroad has been strengthened to decrease total GHG emission of transportation system. Therefore, it is necessary to investigate the GHG emission and the reduction strategies of railroad. The purpose of this study was to develop the calculation method of GHG emission released from railroad. Main source of GHG emission was the energy consumption of railroad vehicle and infrastructure. Based on the emission factor and the equation reported in IPCC 2006 guideline, the total GHG emission of railroad was about 1.4 million tons CO2e in 2007. Using this calculation method, the GHG data of railroad can be calculated quantitatively and managed systematically in the future.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1370-1376
• /
• 2008

The structure of railroad or subway is that low fare transportation system of the large traffic volume. Like this structure is subjected to the cyclic load of moving vehicle. Consequently the result of the settlement analysis or plastic deformation prediction of railroad bed could be used as an important factor in safety of the railroad. The results of cyclic triaxial test were used in the numerical analysis of power model which Li and Selig(1994) developed. The soil samples were obtained from the construction site of railroad. Cyclic triaxial test was conducted with the variation of the magnitude of cyclic load and soil types. The large magnitude of plastic deformation in the railroad bed is caused of structure failure of the railroad.

• 한국물환경학회지
• /
• 제27권3호
• /
• pp.357-363
• /
• 2011

In spite of numerous advantages in railroads such as mass transportation, high reliability, and environmental soundness etc., the value of railroad construction is relatively underestimated compared to road. This is because the current method of evaluation focuses mainly on economic effect. In this study, considering recent research results, the environmental value of railroad construction was assessed by calculating the effect of reduction of emissions and water contamination. With these two benefits, the environmental effect produced by railroads and road construction was calculated and compared to each other using EMME/3. As a result, the senario 4 which considers 'Hot/Cold start' condition and water contamination had highest benefits. Furthermore, the environmental effect produced by railroad is 55~101% higher than road construction. If the suggested method is used in the current appraisal system, the environment-friendly mode like railway would be highly valued, much more than before.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.915-923
• /
• 2011

Our country is promoting the introduction of new means of transportation due to insufficient supply according to the existing demand of road traffic. Among them, manless light railroad transit is settled down as the most definite alternative. However, new traffic systems such as manless light railroad have certain difference between characteristics of hardware and software and subway system. Therefore, there will be many differences compared to the existing contingency system when accidents occur. Railway management organization has to establish railway contingency plan and acquire permission from the minister of the Ministry of Land, Transport, and Maritime Affairs. However, as commercial transportation is available, a new traffic system also should establish contingency plan. Therefore, the establishment of systematic contingency plan is suggested in order to analyze characteristics of manless light railroad in the beginning of introduction and to make contingency response available.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2442-2447
• /
• 2015

Because an electric railway vehicle is a large scale moving load, it can cause various kinds of power quality problems in the railroad power system. The power quality impacts are considered as the strong instantaneous stresses to the related power systems and can cause an accelerating aging and a malfunction of the power supplying components. Therefore, it is necessary to detect the small and intermittent symptoms mixed in the voltage waveform. However, they cannot be detected by the triggering functions of the existing power analyzers installed in the railway systems. This paper will examine the drawback of some fast detection tools and propose an advanced detecting and analyzing method based on a combined TEO and STFT algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.589-593
• /
• 2007

Due to sustainable development, international environmental regulations have been reinforced continuously. Especially, Kyoto protocol related to energy consumption affects to national production system seriously. Even if railroad is the most environmental- friendly transportation, it is necessary to improve its environment. Life cycle assessment (LCA) is a representative tool to evaluate the environment impacts of a product. In the EU's railroad companies, the recycling efficiency and the waste emissions of rolling stocks have improved considering their environment impacts with LCA from a design step. Also, the LCA system of Korean electric motor units has been developed to build an environmentally sound railroad as one of national transportation core technology R&D projects. Therefore, the introduction of LCA will be required to decrease environmental impacts released from rolling stocks in the future.

• 한국소음진동공학회논문집
• /
• 제20권4호
• /
• pp.373-380
• /
• 2010

An interest is increased of environment and energy so, importance on railroad high energy efficiency is magnified. And after Gyeong-bu High speed rail is completed, share rate freight transportation of railroad is expected to be gradually increased due to expand investment for railroad and operate mainly freight transportation on convention line. Therefore a research on DMT freight cars is necessary under like this situation. In paper, we developed analysis model for DMT freight car and DMT freight was analyzed numerically using VI-Rail in each condition of railway having different curve and carried out vibration analysis on curving using developed analysis model. And we carried out test on driving stability follow changing curve radius then measure against UIC code 518.