• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.453-460
• /
• 2011

The inland logistics center is a large scale of logistics facility that enables roads, rails, ports, and airports to carry out chained-transports and combined-transports, and the logistics center are established at the main logistics posts in order to reduce the cost of transport by mass transportation. However, it is expected that the capacity of Euiwang ICD, the only inland logistics centers in the capital area, will reach its limit before 2015, so it is required to establish another stations or to improve the existing facility. Especially, in case of Euiwang ICD, the expansion of the center is not possible because of its position, so it is required to establish new logistics centers in other places in order to raise the capacity of transport. Therefore, this study suggests to establish new metropolitan logistics centers on the western coast line in order to solve the problem of shortage of tract capacity that is brought on by the newly established inland logistics centers on the axis of the western coastline (Song-san Station and An-jung Station), and analyzes how the new logistics center will distribute railroad cargoes. By these, this study contributes to reduce the cost of transport by providing smooth railroad transport service.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.1-10
• /
• 2017

Brake squeal noise has been a challenging problems for a long time. It is very annoying to passengers and residents near tracks. Two methods have been applied to reduce or eliminate brake squeal noise. One is to improve frictional materials; the other is to optimize the topology and structures of brake pads. In this study, we developed two kinds of brake pads; one is a pad whose frictional material is different from the KTX brake pad friction material; the other is a flexible pad that has the same frictional material as that of the KTX brake pad, but a different structure. Squeal noise and friction coefficients were measured and analyzed using a full-scale brake dynamometer. It was found that the dynamometer test can simulate the squeal noise of KTX trains at stations. The squeal frequency of the KTX at 4500Hz was exactly reproduced; this value of 4500Hz was one of the natural frequencies of the KTX brake disc. It was also found that the squeal noise depended on the caliper pressure, initial disc temperature and braking speed. The average friction coefficient was 0.35~0.45. The new pad lowered the squeal noise by 17.3~21.6dB(A).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.503-510
• /
• 2020

Eco-friendly mountain railways operate on concrete rack tracks embedded on existing sharp curved and steep roads to preserve the environment in mountainous areas. Owing to the narrow roads, single lines are inevitable, and many branches are required. In branches, previous switchers and heating devices cannot be applied, because of the limited spacing for the rack and the slow removal of thick ice. To solve these problems, a switch and a heating device have been developed. The switcher changes the line by moving the block of concrete track with hydraulic actuators. The lack of discontinuity reduces the derailment risk and makes locking simple. The heating device uses high frequency induction coils to increase the efficiency and melt the thick ice rapidly. The prototype switcher and heating device were produced and operated to prove their performance. The heating device yielded a 10 times greater efficiency than the previous one. The switcher and heating device are the essential core technologies for the operation of mountain trams in winter and contribute to the spread of mountain railways to domestic or foreign resort areas by enhancing safety and efficiency. In addition, they can provide transportation rights to local residents in poor winter traffic, and bring about tourism and local economic growth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.603-610
• /
• 2016

Over 12 years have passed since the first commercial operation of a Korean high-speed train. Since then, the transport capacity of the high-speed lines has become almost saturated. Therefore, studies have been carried out to increase the operating speed of the trains in order to increase their transportation capacity. This study was carried out to improve the critical speed of the KTX-Sancheon, Korean high-speed train, in order to increase its operating speed. A dynamic analysis of the KTX-Sancheon train was performed using the contact data obtained from the wheel wear profiles that were measured from a KTX-Sancheon train in commercial operation. The analysis results were verified by comparing them with the measurement acceleration data obtained from KTX-Sancheon. The suspension parameters were optimized to improve the operation speed. The critical speed of KTX-Sancheon was increased by 9.4% after the optimization by the response surface method. The optimized suspension parameters are expected to be used for the new bogie design to increase the operating speed of KTX-Sancheon from 300km/h to 350km/h.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1161-1167
• /
• 2016

In this study, an attempt was made to conduct a case study on the development of ground expansive displacement due to lack of bearing capacity of original ground in spite of applying reinforcement treatments that intended to enhance the stability of big size high-speed rail tunnel in large fault zone. For the purpose of this, in-situ measurements made in the middle of excavation stage were analyzed in order to characterize ground responses and numerical analysis was performed to evaluate the effectiveness of reinforcement technique such as elephant foot method applied for this site via comparing with field monitoring measurements. In addition, further numerical studies were carried out to investigate the influence of leg pile installation angle and length, which is one of types of elephant foot method. The results revealed that the optimum condition for the leg pile installation is to maintain 45 degree of installation angle along with 6 meter of embedment depth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.351-358
• /
• 2016

An Electrical Point Machine (NS:New-type Switch), which is equipped and operated at railways in Korea, has been used since the 1960s after being imported from Japan. On the other hand, although the mechanical configuration has improved the position motor control circuit, the electrical connection has not been improved, so NS may have a problem, such as the interlocking system of automatic train operation. In addition, NS is the most vulnerable part in the railway system and a huge train accident may occur due to minor defects. The existing NS wiring set of the circuit controller should be checked only if fixed. Therefore, an excessive inspection time only by a Railroad Signal expert is required. In this paper, the improvement of electrical connection in a NS wiring set, such as the position motor control circuit, was developed and the prototype was installed at Seoul Metro in the distance to go section. The results can be used to help make appropriate adjustments. The improvement of the NS wiring set enhance the maintenance efficiency, passenger service and the stability of the signal system as well as reducing the maintenance cost.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.141-157
• /
• 2007

This paper evaluates the effects of privatization and deregulation on the firm-specific efficiency and total factor productivity (TFP) growth in the Korean and Japanese railways. Using a stochastic frontier approach and a generalized translog functional form, the paper specifies the equation system consisting of a multiproduct variable cost function and input share equations which is estimated with Zellner's iterative seemingly unrelated regression and the corrected least squares method. The Korean and Japanese railway firms are assumed to produce three outputs (Shinkansen passenger-kilometers, incumbent railway passenger-kilometers, ton-kilometers of freight) using three input factors (labor, fuel, maintenance and rolling stock). A monetary value of the ways and fixed installations held by the railroad firm is also included as a quasi-fixed input. The empirical results indicate that the average estimate of cost inefficiency is 2.57% for the total sample and on the average, JNR and JR Kyushu are found to be worst efficient while the most efficient railway firm in the sample is JR West. Also the cost efficiency levels of seven JRs have been improved after the reform and privatization of JNR. The findings also indicate that TFP growth of the privately-owned JRs are higher than those of the government-owned KNR and JNR. Three-island JRs and JR Freight have slightly higher TFP growth than Honshu JRs as well. Thus, the results suggest that managerial autonomy and increased competition via deregulation have improved efficiency and TFP growth.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.35-45
• /
• 2001

In this research, we estimated annual gross fixed capital stock of transport sector, such as road, railroad, airport and seaport during 1968-1997 in Korea. As basic analytic method, we used the polynomial benchmark method. The polynomial benchmark method requires capital stock estimates of at least two benchmark-years and is distinguished from other methods in the fact that retirement rate can be estimated within the model. To estimate gross fixed capital stock of transport sector. we used the basic data on national wealth surveys in 1968, 1977, 1987 and 1997. and investment data of each transport sector during 1968-1997. We used the most reasonable data in the process of estimation after reviewing the collected data. In estimating, some retirement rates were estimated at (-) value, so we have applied various method to fix up the problem. At last, we have reported several estimation results which can be considered as reasonable ones. Compared our results with those of other researches in Korea, estimates in our research project could be said more accurate than those.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.43-48
• /
• 2004

The development of the traffic system has brought relative reduction in aspect of the cost and time distance on the geographical space. SOC(social overhead capital), an express highway and railroad, has a great and absolute effect on the prosperity of community, As Mokpo is one of the community under the influence q West costal highway express and KTX(Korea Train Express), the number of the tourists visiting city of port like Mokpo has increasing gradually, especially at the high-demand season(in Summer). But the coastal passenger boot can't be capable of customers arriving at the port. As a result of this situation, the 'balking' occurs. No 'balking', means the jam of road. In this thesis, by understanding the concept and property of ARENA and simulating operation of coastal passenger boot at Mokpo port, intends to analyze the truth of 'balking' and finds an effective operation method of coastal passenger boot for the solution to the traffic jam. The solution to the jam in the vicinity of port of Mokpo, which try to develop tourism package commodity now, will present the effect of qualitative analysis in giving an opportunity of economic growth of the community, Mokpo.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.15-25
• /
• 2005

Using a stochastic cost frontier approach(SCFA), this paper annually estimates the efficiency and productivity with same data in the papers which analyze the efficiency and productivity using data envelopment analysis(DEA) to compare the results and suggest the political findings of raising the efficiency and productivity for three publicly-owned rail transit properties. the Seoul Subway Corporation (SSC), the Seoul Metropolitan Electrified Railways Sector of Korea National Railroad (SMESRS) and the Busan Urban Transit Authority (BUTA). The results show that the results of SCFA are higher than DEA for efficiency and lower for productivity in that DEA regards the stochastic error and measurement error as the inefficiency contrary to SFCA. But the political findings from these results appears to be similar as follows. First, the productivity of the three properties should be first improved by using existing technologies efficiently and then by introducing new ones. Second, the three properties should improve the technical efficiency through reducing input quantities to raise their efficiency. Finally, all the three components of the productivity such as productive efficiency change, technical change, and scale change should be considered to evaluate their productivity more correctly.