• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2017

This study investigated the causes and problems of train operation impediments through the statistics analysis of 8 years'internal data of Daejeon Metropolitan Express Transit. By evaluating the risks regarding the system, equipment, and parts of high risk group, this study measured the Risk Index Severity, and applied the $5{\times}5$ Risk Assessment Matrix which is a method of risk management to calculate the scale of risk to analyze the safety level and allowance range. As a result, the car sector, the most serious risk, followed by machinery and equipment sector showed that the inherent risk. In particular, the door broken and the door rail signaling and control devices due to defects of the vehicle is high, but also the severity, and frequency are showing very frequent additional potential accidents. PSD also had defects in the machinery sector appeared to be the most dangerous of the PSD poor safety gates, it was found that the glass also involve the risk of mishandling and breakage of the PSD. This study intended to contribute to the transportation benefits through the safety and stable operation of Metropolitan Express Transit.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2223-2231
• /
• 2010

Recently, an important physical device of transportation, such as car, railroad, ship and aircraft has changed into electronic control unit. According to accident reports, the most of car accidents are caused by faults of embedded software loaded to computer control unit. The facts implies that the test to find defects in embedded software haven't performed sufficiently. As a result, it is necessary to establish the test procedures of embedded software based on safety assessment criteria. The objective of this proposal is to provide a unit test procedure complied with the safety assessment criteria for the embedded software. In addition, an effective unit testing procedure and defect analysis methods are proposed and a testing procedure using a safety criteria built-in tool is presented.

• Geomechanics and Engineering
• /
• v.16 no.3
• /
• pp.285-293
• /
• 2018

In densely populated urban areas with a large amount of infrastructure, ground subsidence events can result in massive casualties and economic losses. In South Korea, the incidence of ground subsidence in urban areas has increased in recent years and the number of underground cavities suspected of causing such events has significantly increased. Therefore, it is essential to develop techniques to prevent the occurrence of underground and ground subsidence. In this study, a field test, laboratory test, and numerical analysis were conducted to determine the optimal compaction degree of the upper support layer of any underground cavity below the level of sewer pipes in order to prevent such cavities from collapsing and leading to ground subsidence accidents. During the field test, an underground cavity was simulated using ice, and the generation of the cavity was confirmed using ground penetrating radar. The ground investigation was performed using a cone penetration test, and the compaction of the ground where ground subsidence occurred was evaluated with a laboratory test. The behaviour of the ground under various conditions was predicted using a numerical analysis based on the data obtained from the field test and previous studies. Based on these results, the optimal compaction degree of the ground required to prevent the underground cavity from causing ground subsidence was predicted and presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3115-3120
• /
• 2009

An electric point-machine which changes over a turnout so that it enables a train to be operated in the routine that a train is to proceed has been installed and used in most of the railways such as not only urban railways but also main-line railways. Most of the maintenance works in this electric point-machine is that the maintenance workers manually measure motor power, control power and display power in the site with the use of portable counters. Especially in case of NS or NS-AM electric point machine, the maintenance cycle is so frequent that during the operation casualty accidents caused by carelessness occurs as well as more staff is required for this measurement. In this paper we propose a system for monitoring the state of electric point machine installed in the site to improve maintenance efficiency and it is expected that this monitoring system confirms any measured values on electric point machines in real-time and improves maintenance efficiency.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.23-33
• /
• 2012

Recent technological advances in the domestic railway industry have turned out to deliver a profound impact on the forefront of other industries as well. Furthermore, the introduction of the high-speed railway systems has made it possible to travel around our country in a day, thereby changing our life styles a lot. However, it has been well recognized that many factors can cause unanticipated accidents during the operation. One of the causes is known to be the human errors made by the train operators in locomotive cabs. The problem is getting more serious as the trains run at high speed. As such, the objective of this paper is on how to improve the work environment of the locomotive cabs. Our approach is based on the systems engineering methodology. Specifically, we first identify the context and scope of the problem to be solved. We then continue our effort in deriving the requirements set to accomplish the improvement. These results are utilized in constructing a computer-aided management system for test and evaluation intended for the improvement. The approach taken and the results obtained in this paper is expected to make a contribution on the route to keeping our nation's technologies on the competitive edges in the high-speed railway systems industry.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.797-804
• /
• 2019

The two Koreas agreed to pursue rail and road connections on September 19, 2018 in the Pyongyang Joint Declaration. In December 2018, they launched a joint investigation for the North Korean railway modernization project. The survey confirmed that the track condition is seriously aging so that it is impossible to operate, and the railway network is well connected to major cities. Therefore, it was reasonable to modernize the aging track of the existing railway network rather than construct a new railway network. This paper proposed the railway communication policy for the improvement of railway lines and the construction of the railway wireless network by analyzing the status of roadbeds and tracks in order to enhance interoperability for the inter-Korean railway connection and safety for preventing the railway accidents.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.526-538
• /
• 2016

The government of South Korea has made great efforts in the area of railway safety management by means of a railway safety law and an integrated railway safety plan established in 2004 after the Daegu subway fire accident. However, after certain railway incidents, a reactive railway safety management system has been implemented that has led to fatal accidents caused by the collision, derailment, and fire every year. Hence, this study is intended to propose a framework that integrates data from distributed detection devices into a real-time railway safety monitoring and control system for proactive safety management. Furthermore, we will provide a future development direction for safety performance monitoring indicators to determine whether the railway safety monitoring and control system works effectively. The proposed framework is expected to be a cornerstone for the real-time railway safety monitoring and control system to be implemented in the future.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.356-364
• /
• 2017

The process of inspecting electric railway vehicles is complicated and these vehicles accompany a risk of safety accidents. This developed system will be a great help in simplifying the shunting process and be very useful in terms of ensuring safety and providing user convenience. In this paper, the results of performance evaluation tests are studied on a movable catenary system for railway vehicles that secured mechanical durability, convenience, and operator safety by applying a specific rigid bar catenary of an existing mobile train line. We presented an analysis of the basic characteristics for site installation including sorting. In conclusion, this developed system was obtained in good results through durability test, durable mechanical load test and safety test in require specifications.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.279-286
• /
• 2018

Recently, a safety control platform to monitor the safety of train operation in real time and prevent accidents and risks through control is under study. In the initial design, DDS communication method supporting distributed network is adopted for real-time processing of large amount of data according to the integration of existing distributed safety data. However, communication between server and console inside the safety control platform is applied to existing TCP socket communication. In the case of TCP socket communication, it is possible to process data for a small system of a safety control test bed by one-to-one communication. However, if the data is expanded all over the country in the future, it becomes difficult to cope with a case where communication traffic occurs due to vast amount of data. In this paper, we propose DDS communication method to support distributed network between server and console of security control platform, and demonstrate TCP socket and DDS method, and compare throughput and speed. As a result, we have found that the scalability and flexibility are improved in case of applying DDS communication to future systems.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.102-114
• /
• 2018

The Railway Safety Management System is based on risk management and the basic purpose of risk management is safety management activities to prevent railway accidents and operational obstacles in advance. In order to manage risk, an acceptable risk standard must be established. This risk criterion is used to evaluate the railway risk with both frequency and severity. In the case of overseas railway or other industrial sectors, various factors are reflected in the main variables that constitute the occurrence frequency, but this is no the case in the domestic railway sector. In particular, the current risk assessment criteria in the railway sector remain at a level that exploits the incidents that have occurred in the past and the severity of the property damage and it dose not properly reflect complex and diverse environmental and situational changes in railway operations. Therefore, in this study, it is possible to calculate the potential occurrence of future events instead of occurrence frequency as a component of the risk assessment criteria, focusing on the High-Speed Railway. In addition to the property damage to the consequence, we suggest a rational methodology, development direction, and theoretical implications for constructing accurate and reasonable risk criteria including actual damage such as human injury and time loss.