• 전기학회논문지
• /
• 제59권3호
• /
• pp.645-650
• /
• 2010

In this paper we present the Bimodal-tram simulator using the PXI embedded real-time controllers. The Bimodal-tram is developed in KRRI (Korea Railroad Research Institute). The vehicle can be automatically operated by navigation control system (NCS). For the automatic driving, the vehicle lanes will be marked with permanent magnets that are placed in the ground. The vehicle is controlled by NCS. NCS governs the manual mode and automatic mode driving. The simulator is designed by an identical conception with the real control condition. The dynamic motion of vehicle is simulated by the nonlinear dynamic model. The control computer calculates the control values. The signal interface is linked by CAN communication. The simulation is processed by real-time base. The test driver can see the graphic motion of vehicle and can operate the steering wheel, gas and brake pedal to control direction and velocity of vehicle during the simulation. At present, the simulator is only operated by manual mode. The automatic mode will be linked after the control algorithm is finished. We will use the simulator to develop the control algorithm in the automatic mode. This paper shows the simulator designed for Bimodal-tram using real-time based controller. The results of the test using the simulator are presented and discussed.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1708-1714
• /
• 2011

AT feeding system of the electric railway system is installed every about 10km at between the feeder and catenary in parallel and the mid-point of the transformer is connected to the rail The supply voltage of this system is doubled than rolling stock voltage. So the voltage drop is smaller than usual. And the other merit of this system is the decreasing inductive disturbance to the communication line because of the reduced current in rail which runs reversed in a point of view of rolling stock. Also, ATP(Auto Transformer Post) is installed to reduce the voltage drop and to mitigate the inductive disturbance, but still now the proper distance between the ATP and AT feeding system is not established which ranges from 2 to 10[km]. The stable result of simulation(which is set that the end of the line AT is installed) to the voltage drop and inductive disturbance can not analyzes the effect to the supply system due to the ATP. This paper analyzes the effect to the system depending on the location of ATP by forecasting the voltage drop and inductive disturbance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1108-1113
• /
• 2004

While the environment of usage of information and technology is getting stable and technology is being developed more deeply due to the globalization, making information, standardization, in order to make a fast response to the new industry strategy and business environment, mutual communication and management of correct and fast information are focused on as fundamental elements of keeping competitive power. Accordingly strategic development of urban transit operation organization, storage of information technology of urban railroad, and buildup of standard information infra are very important, so that computerized information system has been built up standardizing efficient maintenance framework of urban transit facilities. To maintain these facilities efficiently, storing the real-time information by standardizing the maintenance organization and building up computerized information system are very important with management of information history of existing maintenance work. Therefore, for the efficient maintenance of civil facilities among urban transit facilities, standardized facilities classification and definition of management elements, and the plan of designing and building standardized database about civil facilities through standardizing technology resources are described in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.935-941
• /
• 2004

While the environment of usage of information and technology is getting stable and technology is being developed more deeply due to the globalization, making information, standardization, in order to make a fast response to the new industry strategy and business environment, mutual communication and management of correct and fast information are focused on as fundamental elements of keeping competitive power. Accordingly strategic development of urban transit operation organization, storage of information technology of urban railroad, and buildup of standard information infra are very important, so that computerized information system has been built up standardizing efficient maintenance framework of urban transit facilities. To maintain these facilities efficiently, storing the real-time information by standardizing the maintenance organization and building up computerized information system are very important with management of information history of existing maintenance work. Therefore, for the efficient maintenance of track system among urban transit facilities, standardized facilities classification and definition of management elements, and the plan of designing and building standardized database about track. system through standardizing technology resources are described in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1221-1226
• /
• 2004

While the environment of usage of information and technology is getting stable and technology is being developed more deeply due to the globalization, making information, standardization, in order to make a fast response to the new industry strategy and business environment, mutual communication and management of correct and fast information are focused on as fundamental elements of keeping competitive power. Accordingly strategic development of urban transit operation organization, storage of information technology of urban railroad, and buildup of standard information infra are very important, so that computerized information system has been built up standardizing efficient maintenance framework of urban transit facilities. To maintain these facilities efficiently, storing the real-time information by standardizing the maintenance organization and building up computerized information system are very important with management of information history of existing maintenance work. Therefore, for the efficient maintenance of station facilities among urban transit facilities, standardized facilities classification and definition of management elements, and the plan of designing and building standardized database about station facilities through standardizing technology resources are described in, this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.595-600
• /
• 2007

Greater expansion and more frequent operation of the railroad transportation system anticipated due to its characteristics including low cost, safety and mass transportation. Recently, effects on the railway structures due to expansion of newly constructed road, construction of subway, city gas pipeline, communication network, electric power network and construction of other railway underground crossing in accordance with urban planning and organization has influenced safe operation of trains. Accordingly, standard for selection of construction method that will enable construction of more economical and rational subway underground crossing structures by preventing problems occurring at the time of above construction works and accidents in safe operation of trains due to construction in advance is definitively necessary. Although there are numerous construction methods that can be applied at the time of construction of railway underground crossing, there are much difficulties in selection of appropriate construction method that considers characteristics of each construction method on non-excavation type construction method, train operation plan of number of operational routes and on-site circumstances. Therefore, this research aims to present rational standard for selection of construction method for such, and standard for slowdown speed and interception of train when passing the areas of slowdown in sectors under construction.

• 전자공학회논문지SC
• /
• 제46권2호
• /
• pp.1-6
• /
• 2009

금속 산화막 반도체 전계효과 트랜지스터(MOSFET)와 트랜지스터(Transistor)와 접합형으로 구성된 절연 게이트 양극성 트랜지스터(IGBT)의 게이트바이어스 상태에서 감마방사선을 조사하면 전기적특성에서 문턱전압과 전류이득의 감소가 발생한다. 저선량과 고선량에서 문턱전압의 이동은 전류의 증감에 따라 변화한다. 본 논문에서 콜렉터전류는 게이트와 에미터간의 전압으로 구동되는데 게이트 바이어스 전압과 조사량에 따라 실험하고 전기적 특성을 분석한다. 그리고 IGBT를 설계하는데 필요한 모델파라미터를 구하고 연구하는데 있다.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.384-393
• /
• 2012

Railroad signaling systems perform controlling the distance and routes between trains. Signaling methods on the wayside are to control passively the train speed by using signal flags which are installed on the wayside. ATS(Automatic Train Stop) device is used as the signaling method on the wayside in Korea. The ATS device is assistance equipment of engineers. Signal information is transmitted by combining mutual inductance between the wayside transmitter and on-board receiver. The wayside transmitter performs changing oscillation frequency according to the signal information. The on-board receiver performs controlling the train by receiving the frequency. Currently, the oscillation frequency on the on-board receiver is 78[kHz] in case of normal state. When the on-board receiver is over the wayside transmitter, the oscillation frequency is changed by capacitors of the wayside transmitter according to signal flags. In case of changing the oscillation frequency, the waveform is modified in the wayside transmitter and on-board receiver. This phenomenon is that other signals or communication frequency are included. In this paper, electric model between the wayside transmitter and on-board receiver is suggested and frequency response in the wayside transmitter and on-board receiver including other signals is estimated by the coupling coefficient. Also, the value of coupling coefficient is proposed to exclude other signals and demonstrated by using Matlab and PSpice program.

• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.23-28
• /
• 2009

At the crossings of turnout systems, noise is generated by the impact of train on the connection points. However, rapid movement changes between rail and wheels on connection point are inevitable on existing turnout section which may cause safety concern as well as noise problem caused by repeated impact load by passing train. And given the turnout is a complicated system which combines various functions such as rolling stock, trackbed, signaling, communication and electrical system, it's very difficult to expect to improve the overall performance of the turnout in such a way of optimizing only particular part of such integrated system. Since the turnout is the only movable section among the integrated parts and has complicated structure that inevitably brings about quick and sudden movement, safety has been still put on the top of the list. This study was aimed at comparing and analyzing the noise data obtained around the turnout of existing railway, by categorizing them into tilting train, high speed train and traditional train, and by distance, speed and type of turnout. And based on the data measured, the forecast of noise level when tilting train accelerates around a turnout was conducted in the study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1093-1094
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.