• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.299-306
• /
• 2001

전기철도차량의 성능특성을 향상시키기 위한 효과적인 방법중의 하나는 바퀴와 레일사이의 점착성능을 향상시키는 것이다. 점착특성을 연구하기 위해서 실제 차량을 등가 모델링한 점착시스템을 제작하였다. 이 시스템은 다양한 점착 파라미터를 변화시켜 바퀴와 레일사이의 점착력을 바꿀 수 있도록 제작되었다. 이 논문은 공전속도에 의한 토오크제어 방법으로써 공전속도의 진동을 억제하기 위한 연구이다.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.228-236
• /
• 2016

Extraordinarily the establishment of towing tank has been initiated after the allocation of space at the basement floor of existing building through remodeling procedure. Therefore the asymmetric tank should be unavoidably determined by compromising with the allowable space and existing building structure. Consequently the shape of towing carriage ought to be selected as a cantilever type to match with the given environmental conditions. Finally the major role of the towing tank has been configured on the fundamental research work for the high speed marine vehicles. Due to the limited length of towing tank, it is appeared that the carriage should accelerated with 1.2m/sec² which is equivalent to twice of the maximum acceleration in ordinary practices on design application of carriage. In such a condition the exerted total power of motor could not be converted to traction force of the carriage without slip for the acceleration. To overcome these difficulties the contact pressure of a horizontal traction wheel to rail has been reinforced by the elastic recovery force of springs on supporting rollers. It is believed that the design experience of the high speed towing carriage under unusual circumferential condition and acceleration barrier could be utilized not only on the design of high speed towing carriage but also on the improvement of existing facilities.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1210-1215
• /
• 2012

Traction motors for driving and power conversion devices using semiconductor switch are equipped with a transportation systems such as an electrical railway system. Power conversion devices have the possibility of malfunction by external electromagnetic waves. As a result, these could affect the safe operation of the railway. Moreover, the electromagnetic waves above safe limits will be harmful to the passengers inside the railway vehicles or anyone working around the rail-track. For this reason, the importance and need about the reliability check and complement of electromagnetic waves generated from the IPT(Inductive Power Transfer) system have been suggested for the safe application of the IPT system to the railway system. In this study, prediction for the electromagnetic wave properties was conducted through FEM(Finite Element Method) analysis of 5kW-class IPT system design model. Next, the 5kW IPT system prototype was made and then the small-scaled railway vehicle was made to mount the IPT system and the energy management system. Finally, the electromagnetic waves generated from the real small-scaled IPT system were measured and analyzed, and then the reliability check of predictions by FEM analysis were carried out.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.305-310
• /
• 2010

DC electricity feeder system operating in the urban railway is typically a feedback circuit consisted of the contact wire and electric railway vehicle via rail. But stray current is flowed on a structure that is not part of the intended electrical circuit with respect to a given structure. This paper presents comparison analysis of field test cases based on criteria of electrolytic corrosion protection of buried metallic structures adjacent to DC traction systems. As a result of it, we confirmed that measurement methods are different from each other about the same tests. Therefore measurement methods to prevent electrolytic corrosion need to establish electrical facilities standards to be applied domestic.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.32-39
• /
• 2000

In this paper, an improved re-adhesion control scheme is proposed for 1C4M railway traction system. It is well known that the coefficient of adhesion between wheel and rail has a maximum value at a certain slip velocity. In the proposed scheme, adhesive effort is estimated by a full-order observer and the driving torque of motor is controlled to get maximum adhesive effort. The-adhesion control simulator is designed to verify the proposed re-adhesion control algorithm. The simulation results and experimental results are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.163-167
• /
• 1998

In this paper an improved re-adhesion control scheme is proposed for IC4M(1-Controller 4-Motors) traction system. It is well known that the coefficient of adhesion between wheel and rail has a maximum value at a certain slip velocity. In the proposed scheme, maximum adhesive force is estimated by an observer and the driving torque of motor is controlled to set maximum adhesive force. The simulation results are presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.61-63
• /
• 2020

본 논문에서는 2개의 브러쉬리스 AC 모터로 구동하는 레일 트랙션 시스템의 설계와 위치제어 방법을 제시한다. 제안된 시스템의 설계에서 롤러와 레일 사이의 미끄러짐 효과를 줄이기 위해 롤러가 레일의 상단 표면에 위치하는 구조로 설계하였다. 레일의 지지대가 상단 중앙에 위치해 있어 두 개의 날개 형태로 롤러가 제작되었으며, 각각의 롤러는 BLAC 모터와 연결되어 있다. 위치제어의 성능을 높이기 위해 코사인 가감속 패턴을 활용하여 구동 시 전류와 속도의 리플을 억제한다. 두 모터의 비선형적인 부하에 의한 밸런스오차를 줄이기 위해 실시간 위치 변화의 밸런스 제어를 제안한다. 제안된 듀얼 BLAC 모터로 구동하는 트랙선 시스템의 위치제어성능은 비교실험을 통해 검증되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1297-1302
• /
• 2004

In DC power distribution system for urban rail transits potential relay, 64P, is used to detect the ground faults. The problem with this 64P is that though it detects the ground fault it cannot identify the faulted region. Therefore the faulted region cannot be isolated properly. It could results in power loss of the trains on the healthy regions and the safety of the passengers in the trains could be affected adversely. A new ground fault protective relaying scheme that can identify the faulted region is presented in this paper. The new concept uses the current differential scheme and the permissive scheme to identify the faulted region correctly. A device with similar characteristic to the arrestor is adapted to use the current relay for the ground fault detection. The role of the device is to block the ground leakage current in normal operating condition and enable the ground fault current to flow in ground fault condition. The algorithm of the new relay and the effect of the newly adapted device in the new relaying scheme are discussed.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.352-360
• /
• 2015

Squeal noise is a harsh, high-pitched sound that occurs when railways are running at sharp curve tracks. The cause of squeal noise is known to be the transient lateral traction force between wheel and rail. Field measurements are too difficult to control the parameters. Thus, the scaled test rig should have been made in order to investigate the generating mechanism of squeal noise. The unique feature of our test rig, HSTR(Hongik Squeal Testing Rig), is that DOFs of its wheelset are as close to as those of the real railway. The attack angle and running speed of the rail roller are controlled in real time for simulating a transient characteristic of driving curve. The environment conditions, such as given axle load, running speed, and wheel's yaw angle have been identified for generating squeal noise and the squeal noise itself has been measured. The relation between wheel creepage and creep force in lateral direction and the criteria for squeal noise have been investigated, which results has been verified by finite element method.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1373-1379
• /
• 2012

철도 시스템에서 방사하는 9~150 kHz 대역의 자기장 복사 방출은 철도 시스템 주변의 무선 설비 등에 영향을 주어 통신 성능의 저하나 오동작을 초래할 수 있다. 본 논문에서는 전기 철도 시스템에서 방사하는 9~150 kHz 주파수 대역의 전자파 노이즈에 대한 등가 회로 모델을 소스 및 전달 경로 분석을 통하여 제안하고, 철도차량의 견인 구동 시스템과 변전 시스템에서 발생하는 수 kHz의 스위칭 노이즈가 급전선과 선로의 루프 회로를 통하여 방사됨을 확인하였다. 또한, 실제의 구리-국수 간 중앙선 철도의 RC Bank의 효과를 분석하여 이러한 회로 등가 모델의 유효성을 검증하였고, 급전선과 선로 사이에 적정한 용량의 커패시터를 장하함으로써 효과적으로 설계 대책이 가능함을 보였다.